×

Overview

When deployed on OpenStack, OKD can be configured to access OpenStack infrastructure, including using OpenStack Cinder volumes as persistent storage for application data.

Permissions

Configuring OpenStack for OKD requires the following role:

member

For creating assets(instances, networking ports, floating ips, volumes, and so on.) you need the member role for the tenant.

Configuring a Security Group

When installing OKD on OpenStack, ensure that you set up the appropriate security groups.

These are some ports that you must have in your security groups, without which the installation fails. You may need more depending on the cluster configuration you want to install. For more information and to adjust your security groups accordingly, see Required Ports for more information.

All OKD Hosts

  • tcp/22 from host running the installer/Ansible

etcd Security Group

  • tcp/2379 from masters

  • tcp/2380 from etcd hosts

Master Security Group

  • tcp/8443 from 0.0.0.0/0

  • tcp/53 from all OKD hosts for environments installed prior to or upgraded to 1.2

  • udp/53 from all OKD hosts for environments installed prior to or upgraded to 1.2

  • tcp/8053 from all OKD hosts for new environments installed with 1.2

  • udp/8053 from all OKD hosts for new environments installed with 1.2

Node Security Group

  • tcp/10250 from masters

  • udp/4789 from nodes

Infrastructure Nodes (ones that can host the OKD router)

  • tcp/443 from 0.0.0.0/0

  • tcp/80 from 0.0.0.0/0

If configuring external load-balancers (ELBs) for load balancing the masters and/or routers, you also need to configure Ingress and Egress security groups for the ELBs appropriately.

Configuring OpenStack Variables

To set the required OpenStack variables, create a /etc/cloud.conf file with the following contents on all of your OKD hosts, both masters and nodes:

[Global]
auth-url = <OS_AUTH_URL>
username = <OS_USERNAME>
password = <password>
domain-id = <OS_USER_DOMAIN_ID>
tenant-id = <OS_TENANT_ID>
region = <OS_REGION_NAME>

[LoadBalancer]
subnet-id = <UUID of the load balancer subnet>
[BlockStorage]
bs-version=v2

Consult your OpenStack administrators for values of the OS_ variables, which are commonly used in OpenStack configuration.

Currently OpenStack Cinder V3 API is not supported. To resolve this issue or disable auto Cinder API version detection, you must force Cinder V2 API by specifying bs-version=v2.

Configuring OKD Masters for OpenStack

You can set an OpenStack configuration on your OKD master and node hosts in two different ways:

Configuring OKD for OpenStack with Ansible

During advanced installations, OpenStack can be configured using the following parameters, which are configurable in the inventory file:

  • openshift_cloudprovider_kind

  • openshift_cloudprovider_openstack_auth_url

  • openshift_cloudprovider_openstack_username

  • openshift_cloudprovider_openstack_password

  • openshift_cloudprovider_openstack_domain_id

  • openshift_cloudprovider_openstack_domain_name

  • openshift_cloudprovider_openstack_tenant_id

  • openshift_cloudprovider_openstack_tenant_name

  • openshift_cloudprovider_openstack_region

  • openshift_cloudprovider_openstack_lb_subnet_id

If a parameter value in the Ansible inventory file contains special characters, such as #, { or }, you must double-escape the value (that is enclose the value in both single and double quotation marks). For example, to use mypasswordwith###hashsigns as a value for the variable openshift_cloudprovider_openstack_password, declare it as openshift_cloudprovider_openstack_password='"mypasswordwith###hashsigns"' in the Ansible host inventory file.

Example 1. Example OpenStack Configuration with Ansible
# Cloud Provider Configuration
#
# Note: You may make use of environment variables rather than store
# sensitive configuration within the ansible inventory.
# For example:
#openshift_cloudprovider_openstack_username="{{ lookup('env','USERNAME') }}"
#openshift_cloudprovider_openstack_password="{{ lookup('env','PASSWORD') }}"
#
# Openstack
#openshift_cloudprovider_kind=openstack
#openshift_cloudprovider_openstack_auth_url=http://openstack.example.com:35357/v2.0/
#openshift_cloudprovider_openstack_username=username
#openshift_cloudprovider_openstack_password=password
#openshift_cloudprovider_openstack_domain_id=domain_id
#openshift_cloudprovider_openstack_domain_name=domain_name
#openshift_cloudprovider_openstack_tenant_id=tenant_id
#openshift_cloudprovider_openstack_tenant_name=tenant_name
#openshift_cloudprovider_openstack_region=region
#openshift_cloudprovider_openstack_lb_subnet_id=subnet_id

Manually Configuring OKD Masters for OpenStack

Edit or create the master configuration file on all masters (/etc/origin/master/master-config.yaml by default) and update the contents of the apiServerArguments and controllerArguments sections:

kubernetesMasterConfig:
  ...
  apiServerArguments:
    cloud-provider:
      - "openstack"
    cloud-config:
      - "/etc/cloud.conf"
  controllerArguments:
    cloud-provider:
      - "openstack"
    cloud-config:
      - "/etc/cloud.conf"

When triggering a containerized installation, only the directories of /etc/origin and /var/lib/origin are mounted to the master and node container. Therefore, cloud.conf should be in /etc/origin/ instead of /etc/.

Manually Configuring OKD Nodes for OpenStack

Edit or create the node configuration file on all nodes (/etc/origin/node/node-config.yaml by default) and update the contents of the kubeletArguments and nodeName sections:

nodeName:
  <instance_name> (1)

kubeletArguments:
  cloud-provider:
    - "openstack"
  cloud-config:
    - "/etc/cloud.conf"
1 Name of the OpenStack instance where the node runs (i.e., name of the virtual machine)

Currently, the nodeName must match the instance name in Openstack in order for the cloud provider integration to work properly. The name must also be RFC1123 compliant.

When triggering a containerized installation, only the directories of /etc/origin and /var/lib/origin are mounted to the master and node container. Therefore, cloud.conf should be in /etc/origin/ instead of /etc/.

Applying Configuration Changes

Start or restart OKD services on all master and node hosts to apply your configuration changes, see Restarting OKD services:

# systemctl restart origin-master-api origin-master-controllers
# systemctl restart origin-node

Switching from not using a cloud provider to using a cloud provider produces an error message. Adding the cloud provider tries to delete the node because the node switches from using the hostname as the externalID (which would have been the case when no cloud provider was being used) to using the cloud provider’s instance-id (which is what the cloud provider specifies). To resolve this issue:

  1. Log in to the CLI as a cluster administrator.

  2. Check and back up existing node labels:

    $ oc describe node <node_name> | grep -Poz '(?s)Labels.*\n.*(?=Taints)'
  3. Delete the nodes:

    $ oc delete node <node_name>
  4. On each node host, restart the OKD service.

    # systemctl restart origin-node
  5. Add back any labels on each node that you previously had.