1. Documentation
×

Optimizing Storage

Optimizing storage helps to minimize storage use across all resources. By optimizing storage, administrators help ensure that existing storage resources are working in an efficient manner.

General Storage Guidelines

The following table lists the available persistent storage technologies for OKD.

Table 1. Available storage options
Storage type Description Examples

Block

  • Presented to the operating system (OS) as a block device

  • Suitable for applications that need full control of storage and operate at a low level on files bypassing the file system

  • Also referred to as a Storage Area Network (SAN)

  • Non-shareable, which means that only one client at a time can mount an endpoint of this type

CNS/CRS GlusterFS [1] iSCSI, Fibre Channel, Ceph RBD, OpenStack Cinder, AWS EBS [1], Dell/EMC Scale.IO, VMware vSphere Volume, GCE Persistent Disk [1], Azure Disk

File

  • Presented to the OS as a file system export to be mounted

  • Also referred to as Network Attached Storage (NAS)

  • Concurrency, latency, file locking mechanisms, and other capabilities vary widely between protocols, implementations, vendors, and scales.

CNS/CRS GlusterFS [1], RHEL NFS, NetApp NFS [2] , Azure File, Vendor NFS, Vendor GlusterFS [3], Azure File, AWS EFS

Object

  • Accessible through a REST API endpoint

  • Configurable for use in the OKD Registry

  • Applications must build their drivers into the application and/or container.

CNS/CRS GlusterFS [1], Ceph Object Storage (RADOS Gateway), OpenStack Swift, Aliyun OSS, AWS S3, Google Cloud Storage, Azure Blob Storage, Vendor S3 [3], Vendor Swift [3]

As of OKD 3.6.1, Container-Native Storage (CNS) GlusterFS (a hyperconverged or cluster-hosted storage solution) and Container-Ready Storage (CRS) GlusterFS (an externally hosted storage solution) provides interfaces for block, file, and object storage for the purpose of the OKD registry, logging, and metrics.

Storage Recommendations

The following table summarizes the recommended and configurable storage technologies for the given OKD cluster application.

Table 2. Recommended and configurable storage technology
Storage type ROX [4] RWX [5] Registry Scaled registry Metrics Logging Apps

Block

Yes [6]

No

Configurable

Not configurable

Recommended

Recommended

Recommended

File

Yes [6]

Yes

Configurable

Configurable

Configurable [7]

Configurable [8]

Recommended

Object

Yes

Yes

Recommended

Recommended

Not configurable

Not configurable

Not configurable [9]

A scaled registry is an OKD registry where three or more pod replicas are running.

Specific Application Storage Recommendations

Testing shows issues with using the RHEL NFS server as storage backend for the container image registry. This includes the OpenShift Container Registry and Quay, Cassandra for metrics storage, and ElasticSearch for logging storage. Therefore, using the RHEL NFS server to back PVs used by core services is not recommended.

Other NFS implementations on the marketplace might not have these issues. Contact the individual NFS implementation vendor for more information on any testing that was possibly completed against these OpenShift core components.

Registry

In a non-scaled/high-availability (HA) OKD registry cluster deployment:

  • The preferred storage technology is object storage followed by block storage. The storage technology does not need to support RWX access mode.

  • The storage technology must ensure read-after-write consistency. All NAS storage (excluding CNS/CRS GlusterFS as it uses an object storage interface) are not recommended for OKD Registry cluster deployment with production workloads.

  • While hostPath volumes are configurable for a non-scaled/HA OKD Registry, they are not recommended for cluster deployment.

Scaled Registry

In a scaled/HA OKD registry cluster deployment:

  • The preferred storage technology is object storage. The storage technology must support RWX access mode and must ensure read-after-write consistency.

  • File storage and block storage are not recommended for a scaled/HA OKD registry cluster deployment with production workloads.

  • All NAS storage (excluding CNS/CRS GlusterFS, as it uses an object storage interface) are not recommended for OKD Registry cluster deployment with production workloads.

Metrics

In an OKD hosted metrics cluster deployment:

  • The preferred storage technology is block storage.

  • It is not recommended to use NAS storage (excluding CNS/CRS GlusterFS as it uses a block storage interface from iSCSI) for a hosted metrics cluster deployment with production workloads.

Testing shows issues with using the RHEL NFS server as a storage backend for the container image registry. This includes Cassandra for metrics storage. Therefore, using the RHEL NFS server to back PVs used by core services is not recommended.

Other NFS implementations on the marketplace might not have these issues. Contact the individual NFS implementation vendor for more information on any testing that was possibly completed against these OpenShift core components.

Logging

In an OKD hosted logging cluster deployment:

  • The preferred storage technology is block storage.

  • It is not recommended to use NAS storage (excluding CNS/CRS GlusterFS as it uses a block storage interface from iSCSI) for a hosted metrics cluster deployment with production workloads.

Testing shows issues with using the RHEL NFS server as a storage backend for the container image registry. This includes ElasticSearch for logging storage. Therefore, using the RHEL NFS server to back PVs used by core services is not recommended.

Other NFS implementations on the marketplace might not have these issues. Contact the individual NFS implementation vendor for more information on any testing that was possibly completed against these OpenShift core components.

Applications

Application use cases vary from application to application, as described in the following examples:

  • Storage technologies that support dynamic PV provisioning have low mount time latencies, and are not tied to nodes to support a healthy cluster.

  • Application developers are responsible for knowing and understanding the storage requirements for their application, and how it works with the provided storage to ensure that issues do not occur when an application scales or interacts with the storage layer.

Other Specific Application Storage Recommendations

  • OKD Internal etcd: For the best etcd reliability, the lowest consistent latency storage technology is preferable.

  • OpenStack Cinder: OpenStack Cinder tends to be adept in ROX access mode use cases.

  • Databases: Databases (RDBMSs, NoSQL DBs, etc.) tend to perform best with dedicated block storage.

Choosing a Graph Driver

Container runtimes store images and containers in a graph driver (a pluggable storage technology), such as DeviceMapper andOverlayFS. Each has advantages and disadvantages.

For more information about OverlayFS, including supportability and usage caveats, see the Red Hat Enterprise Linux (RHEL) 7 Release Notes for your version.

Table 3. Graph Driver Comparisons
Name Description Benefits Limitations

OverlayFS

  • overlay

  • overlay2

Combines a lower (parent) and upper (child) filesystem and a working directory (on the same filesystem as the child). The lower filesystem is the base image, and when you create new containers, a new upper filesystem is created containing the deltas.

  • Faster than Device Mapper at starting and stopping containers. The startup time difference between Device Mapper and Overlay is generally less than one second.

  • Allows for page cache sharing.

Not POSIX compliant.

Device Mapper Thin Provisioning

Uses LVM, Device Mapper, and the dm-thinp kernel module. It differs by removing the loopback device, talking straight to a raw partition (no filesystem).

  • There are measurable performance advantages at moderate load and high density.

  • It gives you per-container limits for capacity (10G by default).

  • You have to have a dedicated partition for it.

  • It is not set up by default in Red Hat Enterprise Linux (RHEL).

  • All containers and images share the same pool of capacity. It cannot be resized without destroying and re-creating the pool.

Device Mapper loop-lvm

Uses the Device Mapper thin provisioning module (dm-thin-pool) to implement copy-on-write (CoW) snapshots. For each device mapper graph location, thin pool is created based on two block devices, one for data and one for metadata. By default, these block devices are created automatically by using loopback mounts of automatically created sparse files.

It works out of the box, so it is useful for prototyping and development purposes.

  • Not all Portable Operating System Interface for Unix (POSIX) features work (for example, O_DIRECT). Most importantly, this mode is unsupported for production workloads.

  • All containers and images share the same pool of capacity. It cannot be resized without destroying and re-creating the pool.

For better performance, Red Hat strongly recommends using the overlayFS storage driver over Device Mapper. However, if you are already using Device Mapper in a production environment, Red Hat strongly recommends using thin provisioning for container images and container root file systems. Otherwise, always use overlayfs2 for Docker engine or overlayFS for CRI-O.

Using a loop device can affect performance issues. While you can still continue to use it, the following warning message is logged:

devmapper: Usage of loopback devices is strongly discouraged for production use.
Please use `--storage-opt dm.thinpooldev` or use `man docker` to refer to
dm.thinpooldev section.

To ease storage configuration, use the docker-storage-setup utility, which automates much of the configuration details:

  1. Edit the the /etc/sysconfig/docker-storage-setup file to specify the device driver:

    STORAGE_DRIVER=devicemapper

    Or

    STORAGE_DRIVER=overlay2

    If using CRI-O specify STORAGE_DRIVER=overlay to use overlay2.

  2. If you had a separate disk drive dedicated to Docker storage (for example, /dev/xvdb), add the following to the /etc/sysconfig/docker-storage-setup file:

    DEVS=/dev/xvdb
VG=docker_vg

  3. Restart the docker-storage-setup service:

    # systemctl restart docker-storage-setup

    After the restart, docker-storage-setup sets up a volume group named docker_vg and creates a thin-pool logical volume. Documentation for thin provisioning on RHEL is available in LVM Administrator Guide. View the newly created volumes with the lsblk command:

    # lsblk /dev/xvdb
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
xvdb 202:16 0 20G 0 disk
└─xvdb1 202:17 0 10G 0 part
  ├─docker_vg-docker--pool_tmeta 253:0 0 12M 0 lvm
  │ └─docker_vg-docker--pool 253:2 0 6.9G 0 lvm
  └─docker_vg-docker--pool_tdata 253:1 0 6.9G 0 lvm
  └─docker_vg-docker--pool 253:2 0 6.9G 0 lvm

    Thin-provisioned volumes are not mounted and have no file system (individual containers do have an XFS file system), thus they do not show up in df output.

  4. To verify that Docker is using an LVM thin pool, and to monitor disk space use, run the docker info command:

    # docker info | egrep -i 'storage|pool|space|filesystem'
Storage Driver: overlay2 (1)
 Backing Filesystem: extfs
    1 The docker info output when using overlay2. 
    # docker info | egrep -i 'storage|pool|space|filesystem'
Storage Driver: devicemapper (1)
 Pool Name: docker_vg-docker--pool (2)
 Pool Blocksize: 524.3 kB
 Backing Filesystem: xfs
 Data Space Used: 62.39 MB
 Data Space Total: 6.434 GB
 Data Space Available: 6.372 GB
 Metadata Space Used: 40.96 kB
 Metadata Space Total: 16.78 MB
 Metadata Space Available: 16.74 MB
    1 The docker info output when using devicemapper.
    2 Corresponds to the VG you specified in /etc/sysconfig/docker-storage-setup.

By default, a thin pool is configured to use 40% of the underlying block device. As you use the storage, LVM automatically extends the thin pool up to 100%. This is why the Data Space Total value does not match the full size of the underlying LVM device. This auto-extend technique was used to unify the storage approach taken in both Red Hat Enterprise Linux and Red Hat Atomic Host, which only uses a single partition.

In development, Docker in Red Hat distributions defaults to a loopback mounted sparse file. To see if your system is using the loopback mode:

# docker info|grep loop0
 Data file: /dev/loop0

Red Hat strongly recommends using the overlay2 storage driver in thin-pool mode for production workloads.

OverlayFS is also supported for container runtimes use cases as of Red Hat Enterprise Linux 7.2, and provides faster start up time and page cache sharing, which can potentially improve density by reducing overall memory utilization.

Benefits of Using the OverlayFS Versus DeviceMapper with SELinux

The main advantage of the OverlayFS graph is Linux page cache sharing among containers that share an image on the same node. This attribute of OverlayFS leads to reduced input/output (I/O) during container startup (and, thus, faster container startup time by several hundred milliseconds), as well as reduced memory usage when similar images are running on a node. Both of these results are beneficial in many environments, especially those with the goal of optimizing for density and have high container churn rate (such as a build farm), or those that have significant overlap in image content.

Page cache sharing is not possible with DeviceMapper because thin-provisioned devices are allocated on a per-container basis.

DeviceMapper is the default Docker storage configuration on Red Hat Enterprise Linux. The use of OverlayFS as the container storage technology is under evaluation and moving Red Hat Enterprise Linux to OverlayFS as the default in future releases is under consideration.

Comparing the Overlay Versus overlay2 Graph Drivers

OverlayFS is a type of union file system. It allows you to overlay one file system on top of another. Changes are recorded in the upper file system, while the lower file system remains unmodified. This allows multiple users to share a file-system image, such as a container or a DVD-ROM, where the base image is on read-only media.

OverlayFS layers two directories on a single Linux host and presents them as a single directory. These directories are called layers, and the unification process is referred to as a union mount.

OverlayFS uses one of two graph drivers, overlay or overlay2. As of Red Hat Enterprise Linux 7.2, overlay became a supported graph driver. As of Red Hat Enterprise Linux 7.4, overlay2 became supported. SELinux on the docker daemon became supported in Red Hat Enterprise Linux 7.4. See the Red Hat Enterprise Linux release notes for information on using OverlayFS with your version of RHEL, including supportability and usage caveats.

The overlay2 driver natively supports up to 128 lower OverlayFS layers but, the overlay driver works only with a single lower OverlayFS layer. Because of this capability, the overlay2 driver provides better performance for layer-related Docker commands, such as docker build, and consumes fewer inodes on the backing filesystem.

Because the overlay driver works with a single lower OverlayFS layer, you cannot implement multi-layered images as multiple OverlayFS layers. Instead, each image layer is implemented as its own directory under /var/lib/docker/overlay. Hard links are then used as a space-efficient way to reference data shared with lower layers.

Docker recommends using the overlay2 driver with OverlayFS rather than the overlay driver, because it is more efficient in terms of inode utilization.

To use overlay2 with RHEL or CentOS you need version 3.10.0-693 or higher of the kernel.
1. CNS/CRS GlusterFS, Ceph RBD, OpenStack Cinder, AWS EBS, Azure Disk, GCE persistent disk, and VMware vSphere support dynamic persistent volume (PV) provisioning natively in OKD.
2. NetApp NFS supports dynamic PV provisioning when using the Trident plugin.
3. Vendor GlusterFS, Vendor S3, and Vendor Swift supportability and configurability may vary.
4. ReadOnlyMany
5. ReadWriteMany
6. This does not apply to physical disk, VM physical disk, VMDK, loopback over NFS, AWS EBS, and Azure Disk.
7. For metrics, it is an anti-pattern to use any shared storage and a single volume (RWX). By default, metrics deploys with one volume per Cassandra Replica.
8. For logging, using any shared storage would be an anti-pattern. One volume per logging-es is required.
9. Object storage is not consumed through OKD’s PVs/persistent volume claims (PVCs). Apps must integrate with the object storage REST API.