About Single Root I/O Virtualization (SR-IOV) hardware networks - Hardware networks | Networking

Components that manage SR-IOV network devices
Next steps

The Single Root I/O Virtualization (SR-IOV) specification is a standard for a type of PCI device assignment that can share a single device with multiple pods.

SR-IOV can segment a compliant network device, recognized on the host node as a physical function (PF), into multiple virtual functions (VFs). The VF is used like any other network device. The SR-IOV network device driver for the device determines how the VF is exposed in the container:

netdevice driver: A regular kernel network device in the netns of the container
vfio-pci driver: A character device mounted in the container

You can use SR-IOV network devices with additional networks on your OKD cluster installed on bare metal or OpenStack infrastructure for applications that require high bandwidth or low latency.

You can enable SR-IOV on a node by using the following command:

$ oc label node <node_name> feature.node.kubernetes.io/network-sriov.capable="true"

Components that manage SR-IOV network devices

The SR-IOV Network Operator creates and manages the components of the SR-IOV stack. It performs the following functions:

Orchestrates discovery and management of SR-IOV network devices
Generates NetworkAttachmentDefinition custom resources for the SR-IOV Container Network Interface (CNI)
Creates and updates the configuration of the SR-IOV network device plugin
Creates node specific SriovNetworkNodeState custom resources
Updates the spec.interfaces field in each SriovNetworkNodeState custom resource

The Operator provisions the following components:

SR-IOV network configuration daemon: A daemon set that is deployed on worker nodes when the SR-IOV Network Operator starts. The daemon is responsible for discovering and initializing SR-IOV network devices in the cluster.
SR-IOV Network Operator webhook: A dynamic admission controller webhook that validates the Operator custom resource and sets appropriate default values for unset fields.
SR-IOV Network resources injector: A dynamic admission controller webhook that provides functionality for patching Kubernetes pod specifications with requests and limits for custom network resources such as SR-IOV VFs. The SR-IOV network resources injector adds the resource field to only the first container in a pod automatically.
SR-IOV network device plugin: A device plugin that discovers, advertises, and allocates SR-IOV network virtual function (VF) resources. Device plugins are used in Kubernetes to enable the use of limited resources, typically in physical devices. Device plugins give the Kubernetes scheduler awareness of resource availability, so that the scheduler can schedule pods on nodes with sufficient resources.
SR-IOV CNI plugin: A CNI plugin that attaches VF interfaces allocated from the SR-IOV network device plugin directly into a pod.
SR-IOV InfiniBand CNI plugin: A CNI plugin that attaches InfiniBand (IB) VF interfaces allocated from the SR-IOV network device plugin directly into a pod.

The SR-IOV Network resources injector and SR-IOV Network Operator webhook are enabled by default and can be disabled by editing the default SriovOperatorConfig CR. Use caution when disabling the SR-IOV Network Operator Admission Controller webhook. You can disable the webhook under specific circumstances, such as troubleshooting, or if you want to use unsupported devices.

Supported platforms

The SR-IOV Network Operator is supported on the following platforms:

Bare metal
OpenStack

Supported devices

OKD supports the following network interface controllers:

Table 1. Supported network interface controllers
Manufacturer	Model	Vendor ID	Device ID
Broadcom	BCM57414	14e4	16d7
Broadcom	BCM57508	14e4	1750
Intel	X710	8086	1572
Intel	XL710	8086	1583
Intel	XXV710	8086	158b
Intel	E810-CQDA2	8086	1592
Intel	E810-2CQDA2	8086	1592
Intel	E810-XXVDA2	8086	159b
Intel	E810-XXVDA4	8086	1593
Mellanox	MT27700 Family [ConnectX‑4]	15b3	1013
Mellanox	MT27710 Family [ConnectX‑4 Lx]	15b3	1015
Mellanox	MT27800 Family [ConnectX‑5]	15b3	1017
Mellanox	MT28880 Family [ConnectX‑5 Ex]	15b3	1019
Mellanox	MT28908 Family [ConnectX‑6]	15b3	101b
Mellanox	MT2892 Family [ConnectX‑6 Dx]	15b3	101d
Mellanox	MT2894 Family [ConnectX‑6 Lx]	15b3	101f
Pensando ^[1]	DSC-25 dual-port 25G distributed services card for ionic driver	0x1dd8	0x1002
Pensando ^[1]	DSC-100 dual-port 100G distributed services card for ionic driver	0x1dd8	0x1003

OpenShift SR-IOV is supported, but you must set a static, Virtual Function (VF) media access control (MAC) address using the SR-IOV CNI config file when using SR-IOV.

For the most up-to-date list of supported cards and compatible OKD versions available, see Openshift Single Root I/O Virtualization (SR-IOV) and PTP hardware networks Support Matrix.

Automated discovery of SR-IOV network devices

The SR-IOV Network Operator searches your cluster for SR-IOV capable network devices on worker nodes. The Operator creates and updates a SriovNetworkNodeState custom resource (CR) for each worker node that provides a compatible SR-IOV network device.

The CR is assigned the same name as the worker node. The status.interfaces list provides information about the network devices on a node.

Do not modify a SriovNetworkNodeState object. The Operator creates and manages these resources automatically.

Example SriovNetworkNodeState object

The following YAML is an example of a SriovNetworkNodeState object created by the SR-IOV Network Operator:

An SriovNetworkNodeState object

apiVersion: sriovnetwork.openshift.io/v1
kind: SriovNetworkNodeState
metadata:
  name: node-25 (1)
  namespace: openshift-sriov-network-operator
  ownerReferences:
  - apiVersion: sriovnetwork.openshift.io/v1
    blockOwnerDeletion: true
    controller: true
    kind: SriovNetworkNodePolicy
    name: default
spec:
  dpConfigVersion: "39824"
status:
  interfaces: (2)
  - deviceID: "1017"
    driver: mlx5_core
    mtu: 1500
    name: ens785f0
    pciAddress: "0000:18:00.0"
    totalvfs: 8
    vendor: 15b3
  - deviceID: "1017"
    driver: mlx5_core
    mtu: 1500
    name: ens785f1
    pciAddress: "0000:18:00.1"
    totalvfs: 8
    vendor: 15b3
  - deviceID: 158b
    driver: i40e
    mtu: 1500
    name: ens817f0
    pciAddress: 0000:81:00.0
    totalvfs: 64
    vendor: "8086"
  - deviceID: 158b
    driver: i40e
    mtu: 1500
    name: ens817f1
    pciAddress: 0000:81:00.1
    totalvfs: 64
    vendor: "8086"
  - deviceID: 158b
    driver: i40e
    mtu: 1500
    name: ens803f0
    pciAddress: 0000:86:00.0
    totalvfs: 64
    vendor: "8086"
  syncStatus: Succeeded

1	The value of the `name` field is the same as the name of the worker node.
2	The `interfaces` stanza includes a list of all of the SR-IOV devices discovered by the Operator on the worker node.

Example use of a virtual function in a pod

You can run a remote direct memory access (RDMA) or a Data Plane Development Kit (DPDK) application in a pod with SR-IOV VF attached.

This example shows a pod using a virtual function (VF) in RDMA mode:

Pod spec that uses RDMA mode

apiVersion: v1
kind: Pod
metadata:
  name: rdma-app
  annotations:
    k8s.v1.cni.cncf.io/networks: sriov-rdma-mlnx
spec:
  containers:
  - name: testpmd
    image: <RDMA_image>
    imagePullPolicy: IfNotPresent
    securityContext:
      runAsUser: 0
      capabilities:
        add: ["IPC_LOCK","SYS_RESOURCE","NET_RAW"]
    command: ["sleep", "infinity"]

The following example shows a pod with a VF in DPDK mode:

Pod spec that uses DPDK mode

apiVersion: v1
kind: Pod
metadata:
  name: dpdk-app
  annotations:
    k8s.v1.cni.cncf.io/networks: sriov-dpdk-net
spec:
  containers:
  - name: testpmd
    image: <DPDK_image>
    securityContext:
      runAsUser: 0
      capabilities:
        add: ["IPC_LOCK","SYS_RESOURCE","NET_RAW"]
    volumeMounts:
    - mountPath: /dev/hugepages
      name: hugepage
    resources:
      limits:
        memory: "1Gi"
        cpu: "2"
        hugepages-1Gi: "4Gi"
      requests:
        memory: "1Gi"
        cpu: "2"
        hugepages-1Gi: "4Gi"
    command: ["sleep", "infinity"]
  volumes:
  - name: hugepage
    emptyDir:
      medium: HugePages

DPDK library for use with container applications

An optional library, app-netutil, provides several API methods for gathering network information about a pod from within a container running within that pod.

This library can assist with integrating SR-IOV virtual functions (VFs) in Data Plane Development Kit (DPDK) mode into the container. The library provides both a Golang API and a C API.

Currently there are three API methods implemented:

GetCPUInfo(): This function determines which CPUs are available to the container and returns the list.
GetHugepages(): This function determines the amount of huge page memory requested in the Pod spec for each container and returns the values.
GetInterfaces(): This function determines the set of interfaces in the container and returns the list. The return value includes the interface type and type-specific data for each interface.

The repository for the library includes a sample Dockerfile to build a container image, dpdk-app-centos. The container image can run one of the following DPDK sample applications, depending on an environment variable in the pod specification: l2fwd, l3wd or testpmd. The container image provides an example of integrating the app-netutil library into the container image itself. The library can also integrate into an init container. The init container can collect the required data and pass the data to an existing DPDK workload.

Huge pages resource injection for Downward API

When a pod specification includes a resource request or limit for huge pages, the Network Resources Injector automatically adds Downward API fields to the pod specification to provide the huge pages information to the container.

The Network Resources Injector adds a volume that is named podnetinfo and is mounted at /etc/podnetinfo for each container in the pod. The volume uses the Downward API and includes a file for huge pages requests and limits. The file naming convention is as follows:

/etc/podnetinfo/hugepages_1G_request_<container-name>
/etc/podnetinfo/hugepages_1G_limit_<container-name>
/etc/podnetinfo/hugepages_2M_request_<container-name>
/etc/podnetinfo/hugepages_2M_limit_<container-name>

The paths specified in the previous list are compatible with the app-netutil library. By default, the library is configured to search for resource information in the /etc/podnetinfo directory. If you choose to specify the Downward API path items yourself manually, the app-netutil library searches for the following paths in addition to the paths in the previous list.

/etc/podnetinfo/hugepages_request
/etc/podnetinfo/hugepages_limit
/etc/podnetinfo/hugepages_1G_request
/etc/podnetinfo/hugepages_1G_limit
/etc/podnetinfo/hugepages_2M_request
/etc/podnetinfo/hugepages_2M_limit

As with the paths that the Network Resources Injector can create, the paths in the preceding list can optionally end with a _<container-name> suffix.

Next steps

Installing the SR-IOV Network Operator
Optional: Configuring the SR-IOV Network Operator
Configuring an SR-IOV network device
If you use OKD Virtualization: Connecting a virtual machine to an SR-IOV network
Configuring an SR-IOV network attachment
Adding a pod to an SR-IOV additional network