Prometheus [monitoring.coreos.com/v1]

additionalAlertManagerConfigs

object

AdditionalAlertManagerConfigs allows specifying a key of a Secret containing additional Prometheus AlertManager configurations. AlertManager configurations specified are appended to the configurations generated by the Prometheus Operator. Job configurations specified must have the form as specified in the official Prometheus documentation: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#alertmanager_config. As AlertManager configs are appended, the user is responsible to make sure it is valid. Note that using this feature may expose the possibility to break upgrades of Prometheus. It is advised to review Prometheus release notes to ensure that no incompatible AlertManager configs are going to break Prometheus after the upgrade.

additionalAlertRelabelConfigs

object

AdditionalAlertRelabelConfigs allows specifying a key of a Secret containing additional Prometheus alert relabel configurations. Alert relabel configurations specified are appended to the configurations generated by the Prometheus Operator. Alert relabel configurations specified must have the form as specified in the official Prometheus documentation: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#alert_relabel_configs. As alert relabel configs are appended, the user is responsible to make sure it is valid. Note that using this feature may expose the possibility to break upgrades of Prometheus. It is advised to review Prometheus release notes to ensure that no incompatible alert relabel configs are going to break Prometheus after the upgrade.

additionalScrapeConfigs

object

AdditionalScrapeConfigs allows specifying a key of a Secret containing additional Prometheus scrape configurations. Scrape configurations specified are appended to the configurations generated by the Prometheus Operator. Job configurations specified must have the form as specified in the official Prometheus documentation: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#scrape_config. As scrape configs are appended, the user is responsible to make sure it is valid. Note that using this feature may expose the possibility to break upgrades of Prometheus. It is advised to review Prometheus release notes to ensure that no incompatible scrape configs are going to break Prometheus after the upgrade.

affinity

object

If specified, the pod’s scheduling constraints.

alerting

object

Define details regarding alerting.

allowOverlappingBlocks

boolean

AllowOverlappingBlocks enables vertical compaction and vertical query merge in Prometheus. This is still experimental in Prometheus so it may change in any upcoming release.

apiserverConfig

object

APIServerConfig allows specifying a host and auth methods to access apiserver. If left empty, Prometheus is assumed to run inside of the cluster and will discover API servers automatically and use the pod’s CA certificate and bearer token file at /var/run/secrets/kubernetes.io/serviceaccount/.

arbitraryFSAccessThroughSMs

object

ArbitraryFSAccessThroughSMs configures whether configuration based on a service monitor can access arbitrary files on the file system of the Prometheus container e.g. bearer token files.

baseImage

string

Base image to use for a Prometheus deployment. Deprecated: use 'image' instead

configMaps

array (string)

ConfigMaps is a list of ConfigMaps in the same namespace as the Prometheus object, which shall be mounted into the Prometheus Pods. The ConfigMaps are mounted into /etc/prometheus/configmaps/<configmap-name>.

containers

array

Containers allows injecting additional containers or modifying operator generated containers. This can be used to allow adding an authentication proxy to a Prometheus pod or to change the behavior of an operator generated container. Containers described here modify an operator generated container if they share the same name and modifications are done via a strategic merge patch. The current container names are: prometheus, config-reloader, and thanos-sidecar. Overriding containers is entirely outside the scope of what the maintainers will support and by doing so, you accept that this behaviour may break at any time without notice.

containers[]

object

A single application container that you want to run within a pod.

disableCompaction

boolean

Disable prometheus compaction.

enableAdminAPI

boolean

Enable access to prometheus web admin API. Defaults to the value of false. WARNING: Enabling the admin APIs enables mutating endpoints, to delete data, shutdown Prometheus, and more. Enabling this should be done with care and the user is advised to add additional authentication authorization via a proxy to ensure only clients authorized to perform these actions can do so. For more information see https://prometheus.io/docs/prometheus/latest/querying/api/#tsdb-admin-apis

enableFeatures

array (string)

Enable access to Prometheus disabled features. By default, no features are enabled. Enabling disabled features is entirely outside the scope of what the maintainers will support and by doing so, you accept that this behaviour may break at any time without notice. For more information see https://prometheus.io/docs/prometheus/latest/disabled_features/

enableRemoteWriteReceiver

boolean

Enable Prometheus to be used as a receiver for the Prometheus remote write protocol. Defaults to the value of false. WARNING: This is not considered an efficient way of ingesting samples. Use it with caution for specific low-volume use cases. It is not suitable for replacing the ingestion via scraping and turning Prometheus into a push-based metrics collection system. For more information see https://prometheus.io/docs/prometheus/latest/querying/api/#remote-write-receiver Only valid in Prometheus versions 2.33.0 and newer.

enforcedBodySizeLimit

string

EnforcedBodySizeLimit defines the maximum size of uncompressed response body that will be accepted by Prometheus. Targets responding with a body larger than this many bytes will cause the scrape to fail. Example: 100MB. If defined, the limit will apply to all service/pod monitors and probes. This is an experimental feature, this behaviour could change or be removed in the future. Only valid in Prometheus versions 2.28.0 and newer.

enforcedLabelLimit

integer

Per-scrape limit on number of labels that will be accepted for a sample. If more than this number of labels are present post metric-relabeling, the entire scrape will be treated as failed. 0 means no limit. Only valid in Prometheus versions 2.27.0 and newer.

enforcedLabelNameLengthLimit

integer

Per-scrape limit on length of labels name that will be accepted for a sample. If a label name is longer than this number post metric-relabeling, the entire scrape will be treated as failed. 0 means no limit. Only valid in Prometheus versions 2.27.0 and newer.

enforcedLabelValueLengthLimit

integer

Per-scrape limit on length of labels value that will be accepted for a sample. If a label value is longer than this number post metric-relabeling, the entire scrape will be treated as failed. 0 means no limit. Only valid in Prometheus versions 2.27.0 and newer.

enforcedNamespaceLabel

string

EnforcedNamespaceLabel If set, a label will be added to 1. all user-metrics (created by ServiceMonitor, PodMonitor and Probe objects) and 2. in all PrometheusRule objects (except the ones excluded in prometheusRulesExcludedFromEnforce) to * alerting & recording rules and * the metrics used in their expressions (expr). Label name is this field’s value. Label value is the namespace of the created object (mentioned above).

enforcedSampleLimit

integer

EnforcedSampleLimit defines global limit on number of scraped samples that will be accepted. This overrides any SampleLimit set per ServiceMonitor or/and PodMonitor. It is meant to be used by admins to enforce the SampleLimit to keep overall number of samples/series under the desired limit. Note that if SampleLimit is lower that value will be taken instead.

enforcedTargetLimit

integer

EnforcedTargetLimit defines a global limit on the number of scraped targets. This overrides any TargetLimit set per ServiceMonitor or/and PodMonitor. It is meant to be used by admins to enforce the TargetLimit to keep the overall number of targets under the desired limit. Note that if TargetLimit is lower, that value will be taken instead, except if either value is zero, in which case the non-zero value will be used. If both values are zero, no limit is enforced.

evaluationInterval

string

Interval between consecutive evaluations. Default: 30s

excludedFromEnforcement

array

List of references to PodMonitor, ServiceMonitor, Probe and PrometheusRule objects to be excluded from enforcing a namespace label of origin. Applies only if enforcedNamespaceLabel set to true.

excludedFromEnforcement[]

object

ObjectReference references a PodMonitor, ServiceMonitor, Probe or PrometheusRule object.

externalLabels

object (string)

The labels to add to any time series or alerts when communicating with external systems (federation, remote storage, Alertmanager).

externalUrl

string

The external URL the Prometheus instances will be available under. This is necessary to generate correct URLs. This is necessary if Prometheus is not served from root of a DNS name.

hostAliases

array

Pods' hostAliases configuration

hostAliases[]

object

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file.

ignoreNamespaceSelectors

boolean

IgnoreNamespaceSelectors if set to true will ignore NamespaceSelector settings from all PodMonitor, ServiceMonitor and Probe objects. They will only discover endpoints within their current namespace. Defaults to false.

image

string

Image if specified has precedence over baseImage, tag and sha combinations. Specifying the version is still necessary to ensure the Prometheus Operator knows what version of Prometheus is being configured.

imagePullSecrets

array

An optional list of references to secrets in the same namespace to use for pulling prometheus and alertmanager images from registries see http://kubernetes.io/docs/user-guide/images#specifying-imagepullsecrets-on-a-pod

imagePullSecrets[]

object

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

initContainers

array

InitContainers allows adding initContainers to the pod definition. Those can be used to e.g. fetch secrets for injection into the Prometheus configuration from external sources. Any errors during the execution of an initContainer will lead to a restart of the Pod. More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/ InitContainers described here modify an operator generated init containers if they share the same name and modifications are done via a strategic merge patch. The current init container name is: init-config-reloader. Overriding init containers is entirely outside the scope of what the maintainers will support and by doing so, you accept that this behaviour may break at any time without notice.

initContainers[]

object

A single application container that you want to run within a pod.

listenLocal

boolean

ListenLocal makes the Prometheus server listen on loopback, so that it does not bind against the Pod IP.

logFormat

string

Log format for Prometheus to be configured with.

logLevel

string

Log level for Prometheus to be configured with.

minReadySeconds

integer

Minimum number of seconds for which a newly created pod should be ready without any of its container crashing for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready) This is an alpha field and requires enabling StatefulSetMinReadySeconds feature gate.

nodeSelector

object (string)

Define which Nodes the Pods are scheduled on.

overrideHonorLabels

boolean

When true, Prometheus resolves label conflicts by renaming the labels in the scraped data to "exported_<label value>" for all targets created from service and pod monitors. Otherwise the HonorLabels field of the service or pod monitor applies.

overrideHonorTimestamps

boolean

When true, Prometheus ignores the timestamps for all the targets created from service and pod monitors. Otherwise the HonorTimestamps field of the service or pod monitor applies.

paused

boolean

When a Prometheus deployment is paused, no actions except for deletion will be performed on the underlying objects.

podMetadata

object

PodMetadata configures Labels and Annotations which are propagated to the prometheus pods.

podMonitorNamespaceSelector

object

Namespace’s labels to match for PodMonitor discovery. If nil, only check own namespace.

podMonitorSelector

object

Experimental PodMonitors to be selected for target discovery. Deprecated: if neither this nor serviceMonitorSelector are specified, configuration is unmanaged.

portName

string

Port name used for the pods and governing service. This defaults to web

priorityClassName

string

Priority class assigned to the Pods

probeNamespaceSelector

object

Experimental Namespaces to be selected for Probe discovery. If nil, only check own namespace.

probeSelector

object

Experimental Probes to be selected for target discovery.

prometheusExternalLabelName

string

Name of Prometheus external label used to denote Prometheus instance name. Defaults to the value of prometheus. External label will not be added when value is set to empty string ("").

prometheusRulesExcludedFromEnforce

array

PrometheusRulesExcludedFromEnforce - list of prometheus rules to be excluded from enforcing of adding namespace labels. Works only if enforcedNamespaceLabel set to true. Make sure both ruleNamespace and ruleName are set for each pair. Deprecated: use excludedFromEnforcement instead.

prometheusRulesExcludedFromEnforce[]

object

PrometheusRuleExcludeConfig enables users to configure excluded PrometheusRule names and their namespaces to be ignored while enforcing namespace label for alerts and metrics.

query

object

QuerySpec defines the query command line flags when starting Prometheus.

queryLogFile

string

QueryLogFile specifies the file to which PromQL queries are logged. If the filename has an empty path, e.g. 'query.log', prometheus-operator will mount the file into an emptyDir volume at /var/log/prometheus. If a full path is provided, e.g. /var/log/prometheus/query.log, you must mount a volume in the specified directory and it must be writable. This is because the prometheus container runs with a read-only root filesystem for security reasons. Alternatively, the location can be set to a stdout location such as /dev/stdout to log query information to the default Prometheus log stream. This is only available in versions of Prometheus >= 2.16.0. For more details, see the Prometheus docs (https://prometheus.io/docs/guides/query-log/)

remoteRead

array

remoteRead is the list of remote read configurations.

remoteRead[]

object

RemoteReadSpec defines the configuration for Prometheus to read back samples from a remote endpoint.

remoteWrite

array

remoteWrite is the list of remote write configurations.

remoteWrite[]

object

RemoteWriteSpec defines the configuration to write samples from Prometheus to a remote endpoint.

replicaExternalLabelName

string

Name of Prometheus external label used to denote replica name. Defaults to the value of prometheus_replica. External label will not be added when value is set to empty string ("").

replicas

integer

Number of replicas of each shard to deploy for a Prometheus deployment. Number of replicas multiplied by shards is the total number of Pods created.

resources

object

Define resources requests and limits for single Pods.

retention

string

Time duration Prometheus shall retain data for. Default is '24h' if retentionSize is not set, and must match the regular expression [0-9]+(ms|s|m|h|d|w|y) (milliseconds seconds minutes hours days weeks years).

retentionSize

string

Maximum amount of disk space used by blocks.

routePrefix

string

The route prefix Prometheus registers HTTP handlers for. This is useful, if using ExternalURL and a proxy is rewriting HTTP routes of a request, and the actual ExternalURL is still true, but the server serves requests under a different route prefix. For example for use with kubectl proxy.

ruleNamespaceSelector

object

Namespaces to be selected for PrometheusRules discovery. If unspecified, only the same namespace as the Prometheus object is in is used.

ruleSelector

object

A selector to select which PrometheusRules to mount for loading alerting/recording rules from. Until (excluding) Prometheus Operator v0.24.0 Prometheus Operator will migrate any legacy rule ConfigMaps to PrometheusRule custom resources selected by RuleSelector. Make sure it does not match any config maps that you do not want to be migrated.

rules

object

/--rules.*/ command-line arguments.

scrapeInterval

string

Interval between consecutive scrapes. Default: 30s

scrapeTimeout

string

Number of seconds to wait for target to respond before erroring.

secrets

array (string)

Secrets is a list of Secrets in the same namespace as the Prometheus object, which shall be mounted into the Prometheus Pods. The Secrets are mounted into /etc/prometheus/secrets/<secret-name>.

securityContext

object

SecurityContext holds pod-level security attributes and common container settings. This defaults to the default PodSecurityContext.

serviceAccountName

string

ServiceAccountName is the name of the ServiceAccount to use to run the Prometheus Pods.

serviceMonitorNamespaceSelector

object

Namespace’s labels to match for ServiceMonitor discovery. If nil, only check own namespace.

serviceMonitorSelector

object

ServiceMonitors to be selected for target discovery. Deprecated: if neither this nor podMonitorSelector are specified, configuration is unmanaged.

sha

string

SHA of Prometheus container image to be deployed. Defaults to the value of version. Similar to a tag, but the SHA explicitly deploys an immutable container image. Version and Tag are ignored if SHA is set. Deprecated: use 'image' instead. The image digest can be specified as part of the image URL.

shards

integer

EXPERIMENTAL: Number of shards to distribute targets onto. Number of replicas multiplied by shards is the total number of Pods created. Note that scaling down shards will not reshard data onto remaining instances, it must be manually moved. Increasing shards will not reshard data either but it will continue to be available from the same instances. To query globally use Thanos sidecar and Thanos querier or remote write data to a central location. Sharding is done on the content of the address target meta-label.

storage

object

Storage spec to specify how storage shall be used.

tag

string

Tag of Prometheus container image to be deployed. Defaults to the value of version. Version is ignored if Tag is set. Deprecated: use 'image' instead. The image tag can be specified as part of the image URL.

thanos

object

Thanos configuration allows configuring various aspects of a Prometheus server in a Thanos environment. This section is experimental, it may change significantly without deprecation notice in any release. This is experimental and may change significantly without backward compatibility in any release.

tolerations

array

If specified, the pod’s tolerations.

tolerations[]

object

The pod this Toleration is attached to tolerates any taint that matches the triple <key,value,effect> using the matching operator <operator>.

topologySpreadConstraints

array

If specified, the pod’s topology spread constraints.

topologySpreadConstraints[]

object

TopologySpreadConstraint specifies how to spread matching pods among the given topology.

version

string

Version of Prometheus to be deployed.

volumeMounts

array

VolumeMounts allows configuration of additional VolumeMounts on the output StatefulSet definition. VolumeMounts specified will be appended to other VolumeMounts in the prometheus container, that are generated as a result of StorageSpec objects.

volumeMounts[]

object

VolumeMount describes a mounting of a Volume within a container.

volumes

array

Volumes allows configuration of additional volumes on the output StatefulSet definition. Volumes specified will be appended to other volumes that are generated as a result of StorageSpec objects.

volumes[]

object

Volume represents a named volume in a pod that may be accessed by any container in the pod.

walCompression

boolean

Enable compression of the write-ahead log using Snappy. This flag is only available in versions of Prometheus >= 2.11.0.

web

object

WebSpec defines the web command line flags when starting Prometheus.

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional

boolean

Specify whether the Secret or its key must be defined

nodeAffinity

object

Describes node affinity scheduling rules for the pod.

podAffinity

object

Describes pod affinity scheduling rules (e.g. co-locate this pod in the same node, zone, etc. as some other pod(s)).

podAntiAffinity

object

Describes pod anti-affinity scheduling rules (e.g. avoid putting this pod in the same node, zone, etc. as some other pod(s)).

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node matches the corresponding matchExpressions; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

An empty preferred scheduling term matches all objects with implicit weight 0 (i.e. it’s a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op).

requiredDuringSchedulingIgnoredDuringExecution

object

If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to an update), the system may or may not try to eventually evict the pod from its node.

preference

object

A node selector term, associated with the corresponding weight.

weight

integer

Weight associated with matching the corresponding nodeSelectorTerm, in the range 1-100.

matchExpressions

array

A list of node selector requirements by node’s labels.

matchExpressions[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchFields

array

A list of node selector requirements by node’s fields.

matchFields[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

nodeSelectorTerms

array

Required. A list of node selector terms. The terms are ORed.

nodeSelectorTerms[]

object

A null or empty node selector term matches no objects. The requirements of them are ANDed. The TopologySelectorTerm type implements a subset of the NodeSelectorTerm.

matchExpressions

array

A list of node selector requirements by node’s labels.

matchExpressions[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchFields

array

A list of node selector requirements by node’s fields.

matchFields[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

requiredDuringSchedulingIgnoredDuringExecution

array

If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

requiredDuringSchedulingIgnoredDuringExecution[]

object

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

podAffinityTerm

object

Required. A pod affinity term, associated with the corresponding weight.

weight

integer

weight associated with matching the corresponding podAffinityTerm, in the range 1-100.

labelSelector

object

A label query over a set of resources, in this case pods.

namespaceSelector

object

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces. This field is beta-level and is only honored when PodAffinityNamespaceSelector feature is enabled.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace"

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

labelSelector

object

A label query over a set of resources, in this case pods.

namespaceSelector

object

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all na