×
Description

DNSRecord is a DNS record managed in the zones defined by dns.config.openshift.io/cluster .spec.publicZone and .spec.privateZone. Cluster admin manipulation of this resource is not supported. This resource is only for internal communication of OpenShift operators. Compatibility level 1: Stable within a major release for a minimum of 12 months or 3 minor releases (whichever is longer).

Type

object

Specification

Property Type Description

apiVersion

string

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

kind

string

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

metadata

ObjectMeta_v2

Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

spec

object

spec is the specification of the desired behavior of the dnsRecord.

status

object

status is the most recently observed status of the dnsRecord.

.spec

Description

spec is the specification of the desired behavior of the dnsRecord.

Type

object

Required
  • dnsName

  • recordTTL

  • recordType

  • targets

Property Type Description

dnsName

string

dnsName is the hostname of the DNS record

recordTTL

integer

recordTTL is the record TTL in seconds. If zero, the default is 30. RecordTTL will not be used in AWS regions Alias targets, but will be used in CNAME targets, per AWS API contract.

recordType

string

recordType is the DNS record type. For example, "A" or "CNAME".

targets

array (string)

targets are record targets.

.status

Description

status is the most recently observed status of the dnsRecord.

Type

object

Property Type Description

observedGeneration

integer

observedGeneration is the most recently observed generation of the DNSRecord. When the DNSRecord is updated, the controller updates the corresponding record in each managed zone. If an update for a particular zone fails, that failure is recorded in the status condition for the zone so that the controller can determine that it needs to retry the update for that specific zone.

zones

array

zones are the status of the record in each zone.

zones[]

object

DNSZoneStatus is the status of a record within a specific zone.

.status.zones

Description

zones are the status of the record in each zone.

Type

array

.status.zones[]

Description

DNSZoneStatus is the status of a record within a specific zone.

Type

object

Property Type Description

conditions

array

conditions are any conditions associated with the record in the zone. If publishing the record fails, the "Failed" condition will be set with a reason and message describing the cause of the failure.

conditions[]

object

DNSZoneCondition is just the standard condition fields.

dnsZone

object

dnsZone is the zone where the record is published.

.status.zones[].conditions

Description

conditions are any conditions associated with the record in the zone. If publishing the record fails, the "Failed" condition will be set with a reason and message describing the cause of the failure.

Type

array

.status.zones[].conditions[]

Description

DNSZoneCondition is just the standard condition fields.

Type

object

Required
  • status

  • type

Property Type Description

lastTransitionTime

string

message

string

reason

string

status

string

type

string

.status.zones[].dnsZone

Description

dnsZone is the zone where the record is published.

Type

object

Property Type Description

id

string

id is the identifier that can be used to find the DNS hosted zone. on AWS zone can be fetched using ID as id in [1] on Azure zone can be fetched using ID as a pre-determined name in [2], on GCP zone can be fetched using ID as a pre-determined name in [3]. [1]: https://docs.aws.amazon.com/cli/latest/reference/route53/get-hosted-zone.html#options [2]: https://docs.microsoft.com/en-us/cli/azure/network/dns/zone?view=azure-cli-latest#az-network-dns-zone-show [3]: https://cloud.google.com/dns/docs/reference/v1/managedZones/get

tags

object (string)

tags can be used to query the DNS hosted zone. on AWS, resourcegroupstaggingapi [1] can be used to fetch a zone using Tags as tag-filters, [1]: https://docs.aws.amazon.com/cli/latest/reference/resourcegroupstaggingapi/get-resources.html#options

API endpoints

The following API endpoints are available:

  • /apis/ingress.operator.openshift.io/v1/dnsrecords

    • GET: list objects of kind DNSRecord

  • /apis/ingress.operator.openshift.io/v1/namespaces/{namespace}/dnsrecords

    • DELETE: delete collection of DNSRecord

    • GET: list objects of kind DNSRecord

    • POST: create a DNSRecord

  • /apis/ingress.operator.openshift.io/v1/namespaces/{namespace}/dnsrecords/{name}

    • DELETE: delete a DNSRecord

    • GET: read the specified DNSRecord

    • PATCH: partially update the specified DNSRecord

    • PUT: replace the specified DNSRecord

  • /apis/ingress.operator.openshift.io/v1/namespaces/{namespace}/dnsrecords/{name}/status

    • GET: read status of the specified DNSRecord

    • PATCH: partially update status of the specified DNSRecord

    • PUT: replace status of the specified DNSRecord

/apis/ingress.operator.openshift.io/v1/dnsrecords

Table 1. Global query parameters
Parameter Type Description

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

pretty

string

If 'true', then the output is pretty printed.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

HTTP method

GET

Description

list objects of kind DNSRecord

Table 2. HTTP responses
HTTP code Reponse body

200 - OK

DNSRecordList schema

401 - Unauthorized

Empty

/apis/ingress.operator.openshift.io/v1/namespaces/{namespace}/dnsrecords

Table 3. Global path parameters
Parameter Type Description

namespace

string

object name and auth scope, such as for teams and projects

Table 4. Global query parameters
Parameter Type Description

pretty

string

If 'true', then the output is pretty printed.

HTTP method

DELETE

Description

delete collection of DNSRecord

Table 5. Query parameters
Parameter Type Description

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Table 6. HTTP responses
HTTP code Reponse body

200 - OK

Status_v2 schema

401 - Unauthorized

Empty

HTTP method

GET

Description

list objects of kind DNSRecord

Table 7. Query parameters
Parameter Type Description

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Table 8. HTTP responses
HTTP code Reponse body

200 - OK

DNSRecordList schema

401 - Unauthorized

Empty

HTTP method

POST

Description

create a DNSRecord

Table 9. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

Table 10. Body parameters
Parameter Type Description

body

DNSRecord schema

Table 11. HTTP responses
HTTP code Reponse body

200 - OK

DNSRecord schema

201 - Created

DNSRecord schema

202 - Accepted

DNSRecord schema

401 - Unauthorized

Empty

/apis/ingress.operator.openshift.io/v1/namespaces/{namespace}/dnsrecords/{name}

Table 12. Global path parameters
Parameter Type Description

name

string

name of the DNSRecord

namespace

string

object name and auth scope, such as for teams and projects

Table 13. Global query parameters
Parameter Type Description

pretty

string

If 'true', then the output is pretty printed.

HTTP method

DELETE

Description

delete a DNSRecord

Table 14. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

gracePeriodSeconds

integer

The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.

orphanDependents

boolean

Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.

propagationPolicy

string

Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Table 15. Body parameters
Parameter Type Description

body

DeleteOptions_v2 schema

Table 16. HTTP responses
HTTP code Reponse body

200 - OK

Status_v2 schema

202 - Accepted

Status_v2 schema

401 - Unauthorized

Empty

HTTP method

GET

Description

read the specified DNSRecord

Table 17. Query parameters
Parameter Type Description

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

Table 18. HTTP responses
HTTP code Reponse body

200 - OK

DNSRecord schema

401 - Unauthorized

Empty

HTTP method

PATCH

Description

partially update the specified DNSRecord

Table 19. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

Table 20. Body parameters
Parameter Type Description

body

Patch schema

Table 21. HTTP responses
HTTP code Reponse body

200 - OK

DNSRecord schema

401 - Unauthorized

Empty

HTTP method

PUT

Description

replace the specified DNSRecord

Table 22. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

Table 23. Body parameters
Parameter Type Description

body

DNSRecord schema

Table 24. HTTP responses
HTTP code Reponse body

200 - OK

DNSRecord schema

201 - Created

DNSRecord schema

401 - Unauthorized

Empty

/apis/ingress.operator.openshift.io/v1/namespaces/{namespace}/dnsrecords/{name}/status

Table 25. Global path parameters
Parameter Type Description

name

string

name of the DNSRecord

namespace

string

object name and auth scope, such as for teams and projects

Table 26. Global query parameters
Parameter Type Description

pretty

string

If 'true', then the output is pretty printed.

HTTP method

GET

Description

read status of the specified DNSRecord

Table 27. Query parameters
Parameter Type Description

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

Table 28. HTTP responses
HTTP code Reponse body

200 - OK

DNSRecord schema

401 - Unauthorized

Empty

HTTP method

PATCH

Description

partially update status of the specified DNSRecord

Table 29. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

Table 30. Body parameters
Parameter Type Description

body

Patch schema

Table 31. HTTP responses
HTTP code Reponse body

200 - OK

DNSRecord schema

401 - Unauthorized

Empty

HTTP method

PUT

Description

replace status of the specified DNSRecord

Table 32. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

Table 33. Body parameters
Parameter Type Description

body

DNSRecord schema

Table 34. HTTP responses
HTTP code Reponse body

200 - OK

DNSRecord schema

201 - Created

DNSRecord schema

401 - Unauthorized

Empty