×

Egress IP address assignment for project egress traffic

By configuring an egress IP address for a project, all outgoing external connections from the specified project will share the same, fixed source IP address. External resources can recognize traffic from a particular project based on the egress IP address. An egress IP address assigned to a project is different from the egress router, which is used to send traffic to specific destinations.

Egress IP addresses are implemented as additional IP addresses on the primary network interface of the node and must be in the same subnet as the node’s primary IP address.

Egress IP addresses must not be configured in any Linux network configuration files, such as ifcfg-eth0.

Egress IPs on Amazon Web Services (AWS), Google Cloud Platform (GCP), and Azure are supported only on OKD version 4.10 and later.

Allowing additional IP addresses on the primary network interface might require extra configuration when using some cloud or virtual machines solutions.

You can assign egress IP addresses to namespaces by setting the egressIPs parameter of the NetNamespace object. After an egress IP is associated with a project, OpenShift SDN allows you to assign egress IPs to hosts in two ways:

  • In the automatically assigned approach, an egress IP address range is assigned to a node.

  • In the manually assigned approach, a list of one or more egress IP address is assigned to a node.

Namespaces that request an egress IP address are matched with nodes that can host those egress IP addresses, and then the egress IP addresses are assigned to those nodes. If the egressIPs parameter is set on a NetNamespace object, but no node hosts that egress IP address, then egress traffic from the namespace will be dropped.

High availability of nodes is automatic. If a node that hosts an egress IP address is unreachable and there are nodes that are able to host that egress IP address, then the egress IP address will move to a new node. When the unreachable node comes back online, the egress IP address automatically moves to balance egress IP addresses across nodes.

The following limitations apply when using egress IP addresses with the OpenShift SDN cluster network provider:

  • You cannot use manually assigned and automatically assigned egress IP addresses on the same nodes.

  • If you manually assign egress IP addresses from an IP address range, you must not make that range available for automatic IP assignment.

  • You cannot share egress IP addresses across multiple namespaces using the OpenShift SDN egress IP address implementation. If you need to share IP addresses across namespaces, the OVN-Kubernetes cluster network provider egress IP address implementation allows you to span IP addresses across multiple namespaces.

If you use OpenShift SDN in multitenant mode, you cannot use egress IP addresses with any namespace that is joined to another namespace by the projects that are associated with them. For example, if project1 and project2 are joined by running the oc adm pod-network join-projects --to=project1 project2 command, neither project can use an egress IP address. For more information, see BZ#1645577.

Considerations when using automatically assigned egress IP addresses

When using the automatic assignment approach for egress IP addresses the following considerations apply:

  • You set the egressCIDRs parameter of each node’s HostSubnet resource to indicate the range of egress IP addresses that can be hosted by a node. OKD sets the egressIPs parameter of the HostSubnet resource based on the IP address range you specify.

If the node hosting the namespace’s egress IP address is unreachable, OKD will reassign the egress IP address to another node with a compatible egress IP address range. The automatic assignment approach works best for clusters installed in environments with flexibility in associating additional IP addresses with nodes.

Considerations when using manually assigned egress IP addresses

This approach is used for clusters where there can be limitations on associating additional IP addresses with nodes such as in public cloud environments.

When using the manual assignment approach for egress IP addresses the following considerations apply:

  • You set the egressIPs parameter of each node’s HostSubnet resource to indicate the IP addresses that can be hosted by a node.

  • Multiple egress IP addresses per namespace are supported.

If a namespace has multiple egress IP addresses and those addresses are hosted on multiple nodes, the following additional considerations apply:

  • If a pod is on a node that is hosting an egress IP address, that pod always uses the egress IP address on the node.

  • If a pod is not on a node that is hosting an egress IP address, that pod uses an egress IP address at random.

Configuring automatically assigned egress IP addresses for a namespace

In OKD you can enable automatic assignment of an egress IP address for a specific namespace across one or more nodes.

Prerequisites
  • You have access to the cluster as a user with the cluster-admin role.

  • You have installed the OpenShift CLI (oc).

Procedure
  1. Update the NetNamespace object with the egress IP address using the following JSON:

     $ oc patch netnamespace <project_name> --type=merge -p \
      '{
        "egressIPs": [
          "<ip_address>"
        ]
      }'

    where:

    <project_name>

    Specifies the name of the project.

    <ip_address>

    Specifies one or more egress IP addresses for the egressIPs array.

    For example, to assign project1 to an IP address of 192.168.1.100 and project2 to an IP address of 192.168.1.101:

    $ oc patch netnamespace project1 --type=merge -p \
      '{"egressIPs": ["192.168.1.100"]}'
    $ oc patch netnamespace project2 --type=merge -p \
      '{"egressIPs": ["192.168.1.101"]}'

    Because OpenShift SDN manages the NetNamespace object, you can make changes only by modifying the existing NetNamespace object. Do not create a new NetNamespace object.

  2. Indicate which nodes can host egress IP addresses by setting the egressCIDRs parameter for each host using the following JSON:

    $ oc patch hostsubnet <node_name> --type=merge -p \
      '{
        "egressCIDRs": [
          "<ip_address_range>", "<ip_address_range>"
        ]
      }'

    where:

    <node_name>

    Specifies a node name.

    <ip_address_range>

    Specifies an IP address range in CIDR format. You can specify more than one address range for the egressCIDRs array.

    For example, to set node1 and node2 to host egress IP addresses in the range 192.168.1.0 to 192.168.1.255:

    $ oc patch hostsubnet node1 --type=merge -p \
      '{"egressCIDRs": ["192.168.1.0/24"]}'
    $ oc patch hostsubnet node2 --type=merge -p \
      '{"egressCIDRs": ["192.168.1.0/24"]}'

    OKD automatically assigns specific egress IP addresses to available nodes in a balanced way. In this case, it assigns the egress IP address 192.168.1.100 to node1 and the egress IP address 192.168.1.101 to node2 or vice versa.

Configuring manually assigned egress IP addresses for a namespace

In OKD you can associate one or more egress IP addresses with a namespace.

Prerequisites
  • You have access to the cluster as a user with the cluster-admin role.

  • You have installed the OpenShift CLI (oc).

Procedure
  1. Update the NetNamespace object by specifying the following JSON object with the desired IP addresses:

     $ oc patch netnamespace <project_name> --type=merge -p \
      '{
        "egressIPs": [
          "<ip_address>"
        ]
      }'

    where:

    <project_name>

    Specifies the name of the project.

    <ip_address>

    Specifies one or more egress IP addresses for the egressIPs array.

    For example, to assign the project1 project to the IP addresses 192.168.1.100 and 192.168.1.101:

    $ oc patch netnamespace project1 --type=merge \
      -p '{"egressIPs": ["192.168.1.100","192.168.1.101"]}'

    To provide high availability, set the egressIPs value to two or more IP addresses on different nodes. If multiple egress IP addresses are set, then pods use all egress IP addresses roughly equally.

    Because OpenShift SDN manages the NetNamespace object, you can make changes only by modifying the existing NetNamespace object. Do not create a new NetNamespace object.

  2. Manually assign the egress IP to the node hosts. Set the egressIPs parameter on the HostSubnet object on the node host. Using the following JSON, include as many IP addresses as you want to assign to that node host:

    $ oc patch hostsubnet <node_name> --type=merge -p \
      '{
        "egressIPs": [
          "<ip_address>",
          "<ip_address>"
          ]
      }'

    where:

    <node_name>

    Specifies a node name.

    <ip_address>

    Specifies an IP address. You can specify more than one IP address for the egressIPs array.

    For example, to specify that node1 should have the egress IPs 192.168.1.100, 192.168.1.101, and 192.168.1.102:

    $ oc patch hostsubnet node1 --type=merge -p \
      '{"egressIPs": ["192.168.1.100", "192.168.1.101", "192.168.1.102"]}'

    In the previous example, all egress traffic for project1 will be routed to the node hosting the specified egress IP, and then connected through Network Address Translation (NAT) to that IP address.