Soon, all Red Hat OpenShift documentation will only be available on docs.redhat.com, the official location of all Red Hat product documentation. Get familiar with the updated experience today!
  1. Documentation
×

Persistent Storage Using GlusterFS

Overview

GlusterFS can be configured to provide persistent storage and dynamic provisioning for OKD. It can be used both containerized within OKD (Containerized GlusterFS) and non-containerized on its own nodes (External GlusterFS).

Containerized GlusterFS

With Containerized GlusterFS, GlusterFS runs containerized directly on OKD nodes. This allows for compute and storage instances to be scheduled and run from the same set of hardware.

Architecture - Containerized GlusterFS
Figure 1. Architecture - Containerized GlusterFS

External GlusterFS

With External GlusterFS, GlusterFS runs on its own dedicated nodes and is managed by an instance of heketi, the GlusterFS volume management REST service. This heketi service must run as containerized, and not as standalone. Containerization allows for an easy mechanism to provide high-availability to the service. This documentation focuses on the containerized heketi configuration.

Standalone GlusterFS

If you have a standalone GlusterFS cluster available in your environment, you can make use of volumes on that cluster using OKD’s GlusterFS volume plug-in. This solution is a conventional deployment where applications run on dedicated compute nodes, an OKD cluster, and storage is provided from its own dedicated nodes.

Architecture - Standalone GlusterFS Cluster Using OKD’s GlusterFS Volume Plug-in
Figure 2. Architecture - Standalone GlusterFS Cluster Using OKD’s GlusterFS Volume Plug-in

See the GlusterFS Installation Guide and the GlusterFS Administration Guide for more on GlusterFS.

High availability of storage in the infrastructure is left to the underlying storage provider.

GlusterFS Volumes

GlusterFS volumes present a POSIX-compliant filesystem and are comprised of one or more "bricks" across one or more nodes in their cluster. A brick is just a directory on a given storage node and is typically the mount point for a block storage device. GlusterFS handles distribution and replication of files across a given volume’s bricks per that volume’s configuration.

It is recommended to use heketi for most common volume management operations such as create, delete, and resize. OKD expects heketi to be present when using the GlusterFS provisioner. heketi by default will create volumes that are three-ray replica, that is volumes where each file has three copies across three different nodes. As such it is recommended that any GlusterFS clusters which will be used by heketi have at least three nodes available.

There are many features available for GlusterFS volumes, but they are beyond the scope of this documentation.

gluster-block Volumes

gluster-block volumes are volumes that can be mounted over iSCSI. This is done by creating a file on an existing GlusterFS volume and then presenting that file as a block device via an iSCSI target. Such GlusterFS volumes are called block-hosting volumes.

gluster-block volumes present a sort of trade-off. Being consumed as iSCSI targets, gluster-block volumes can only be mounted by one node/client at a time which is in contrast to GlusterFS volumes which can be mounted by multiple nodes/clients. Being files on the backend, however, allows for operations which are typically costly on GlusterFS volumes (e.g. metadata lookups) to be converted to ones which are typically much faster on GlusterFS volumes (e.g. reads and writes). This leads to potentially substantial performance improvements for certain workloads.

For more information about OpenShift Container Storage and OKD interoperability, see link: OpenShift Container Storage and OpenShift Container Platform interoperability matrix.

Gluster S3 Storage

The Gluster S3 service allows user applications to access GlusterFS storage via an S3 interface. The service binds to two GlusterFS volumes, one for object data and one for object metadata, and translates incoming S3 REST requests into filesystem operations on the volumes. It is recommended to run the service as a pod inside OKD.

At this time, use and installation of the Gluster S3 service is in tech preview.

Considerations

This section covers a few topics that should be taken into consideration when using GlusterFS with OKD.

Software Prerequisites

To access GlusterFS volumes, the mount.glusterfs command must be available on all schedulable nodes. For RPM-based systems, the glusterfs-fuse package must be installed:

# yum install glusterfs-fuse

If glusterfs-fuse is already installed on the nodes, ensure that the latest version is installed:

# yum update glusterfs-fuse

Hardware Requirements

Any nodes used in a Containerized GlusterFS or External GlusterFS cluster are considered storage nodes. Storage nodes can be grouped into distinct cluster groups, though a single node can not be in multiple groups. For each group of storage nodes:

  • A minimum of one or more storage nodes per group is required based on storage gluster volumetype option.

  • Each storage node must have a minimum of 8 GB of RAM. This is to allow running the GlusterFS pods, as well as other applications and the underlying operating system.

    • Each GlusterFS volume also consumes memory on every storage node in its storage cluster, which is about 30 MB. The total amount of RAM should be determined based on how many concurrent volumes are desired or anticipated.

  • Each storage node must have at least one raw block device with no present data or metadata. These block devices will be used in their entirety for GlusterFS storage. Make sure the following are not present:

    • Partition tables (GPT or MSDOS)

    • Filesystems or residual filesystem signatures

    • LVM2 signatures of former Volume Groups and Logical Volumes

    • LVM2 metadata of LVM2 physical volumes

    If in doubt, wipefs -a <device> should clear any of the above.

It is recommended to plan for two clusters: one dedicated to storage for infrastructure applications (such as an OpenShift Container Registry) and one dedicated to storage for general applications. This would require a total of six storage nodes. This recommendation is made to avoid potential impacts on performance in I/O and volume creation.

Storage Sizing

Every GlusterFS cluster must be sized based on the needs of the anticipated applications that will use its storage. For example, there are sizing guides available for both OpenShift Logging and OpenShift Metrics.

Some additional things to consider are:

  • For each Containerized GlusterFS or External GlusterFS cluster, the default behavior is to create GlusterFS volumes with three-way replication. As such, the total storage to plan for should be the desired capacity times three.

    • As an example, each heketi instance creates a heketidbstorage volume that is 2 GB in size, requiring a total of 6 GB of raw storage across three nodes in the storage cluster. This capacity is always required and should be taken into consideration for sizing calculations.

    • Applications like an integrated OpenShift Container Registry share a single GlusterFS volume across multiple instances of the application.

  • gluster-block volumes require the presence of a GlusterFS block-hosting volume with enough capacity to hold the full size of any given block volume’s capacity.

    • By default, if no such block-hosting volume exists, one will be automatically created at a set size. The default for this size is 100 GB. If there is not enough space in the cluster to create the new block-hosting volume, the creation of the block volume will fail. Both the auto-create behavior and the auto-created volume size are configurable.

    • Applications with multiple instances that use gluster-block volumes, such as OpenShift Logging and OpenShift Metrics, will use one volume per instance.

  • The Gluster S3 service binds to two GlusterFS volumes. In a default cluster installation, these volumes are 1 GB each, consuming a total of 6 GB of raw storage.

Volume Operation Behaviors

Volume operations, such as create and delete, can be impacted by a variety of environmental circumstances and can in turn affect applications as well.

  • If the application pod requests a dynamically provisioned GlusterFS persistent volume claim (PVC), then extra time might have to be considered for the volume to be created and bound to the corresponding PVC. This effects the startup time for an application pod.

    Creation time of GlusterFS volumes scales linearly depending on the number of volumes. As an example, given 100 volumes in a cluster using recommended hardware specifications, each volume took approximately 6 seconds to be created, allocated, and bound to a pod.

  • When a PVC is deleted, that action will trigger the deletion of the underlying GlusterFS volume. While PVCs will disappear immediately from the oc get pvc output, this does not mean the volume has been fully deleted. A GlusterFS volume can only be considered deleted when it does not show up in the command-line outputs for heketi-cli volume list and gluster volume list.

    The time to delete the GlusterFS volume and recycle its storage depends on and scales linearly with the number of active GlusterFS volumes. While pending volume deletes do not affect running applications, storage administrators should be aware of and be able to estimate how long they will take, especially when tuning resource consumption at scale.

Volume Security

This section covers GlusterFS volume security, including Portable Operating System Interface [for Unix] (POSIX) permissions and SELinux considerations. Understanding the basics of Volume Security, POSIX permissions, and SELinux is presumed.

In OpenShift Container Storage 3.11, you must enable SSL encryption to ensure secure access control to persistent volumes.

For more information, see the Red Hat OpenShift Container Storage 3.11 Operations Guide.

POSIX Permissions

GlusterFS volumes present POSIX-compliant file systems. As such, access permissions can be managed using standard command-line tools such as chmod and chown.

For Containerized GlusterFS and External GlusterFS, it is also possible to specify a group ID that will own the root of the volume at volume creation time. For static provisioning, this is specified as part of the heketi-cli volume creation command:

$ heketi-cli volume create --size=100 --gid=10001000

The PersistentVolume that will be associated with this volume must be annotated with the group ID so that pods consuming the PersistentVolume can have access to the file system. This annotation takes the form of:

pv.beta.kubernetes.io/gid: "<GID>" ---

For dynamic provisioning, the provisioner automatically generates and applies a group ID. It is possible to control the range from which this group ID is selected using the gidMin and gidMax StorageClass parameters (see Dynamic Provisioning). The provisioner also takes care of annotating the generated PersistentVolume with the group ID.

SELinux

By default, SELinux does not allow writing from a pod to a remote GlusterFS server. To enable writing to GlusterFS volumes with SELinux on, run the following on each node running GlusterFS:

$ sudo setsebool -P virt_sandbox_use_fusefs on (1)
$ sudo setsebool -P virt_use_fusefs on
1 The -P option makes the boolean persistent between reboots.

The virt_sandbox_use_fusefs boolean is defined by the docker-selinux package. If you get an error saying it is not defined, ensure that this package is installed.

If you use Atomic Host, the SELinux booleans are cleared when you upgrade Atomic Host. When you upgrade Atomic Host, you must set these boolean values again.

Installation

For standalone GlusterFS, there is no component installation required to use it with OKD. OKD comes with a built-in GlusterFS volume driver, allowing it to make use of existing volumes on existing clusters. See provisioning for more on how to make use of existing volumes.

For Containerized GlusterFS and External GlusterFS, it is recommended to use the cluster installation process to install the required components.

External GlusterFS: Installing GlusterFS Nodes

For External GlusterFS, each GlusterFS node must have the appropriate system configurations (e.g. firewall ports, kernel modules) and the GlusterFS services must be running. The services should not be further configured, and should not have formed a Trusted Storage Pool.

The installation of GlusterFS nodes is beyond the scope of this documentation. For more information, see the GlusterFS Installation Guide.

Using the Installer

Use separate nodes for glusterfs and glusterfs_registry node groups. Each instance must be a separate gluster instance as they are managed independently. Using the same node for glusterfs and glusterfs_registry node groups causes deployment failure.

The cluster installation process can be used to install one or both of two GlusterFS node groups:

  • glusterfs: A general storage cluster for use by user applications.

  • glusterfs_registry: A dedicated storage cluster for use by infrastructure applications such as an integrated OpenShift Container Registry.

It is recommended to deploy both groups to avoid potential impacts on performance in I/O and volume creation. Both of these are defined in the inventory hosts file.

To define the storage clusters, include the relevant names in the [OSEv3:children] group, creating similarly named groups. Then populate the groups with the node information.

In the [OSEv3:children] group, you add the masters, nodes, etcd, and the glusterfs and glusterfs_registry storage clusters.

After the groups are created and populated, you then configure the clusters by defining more parameter values in the [OSEv3:vars] group. The variables interact with the GlusterFS clusters. and are stored in the inventory file, as shown in the following example.

  • glusterfs variables begin with openshift_storage_glusterfs_.

  • glusterfs_registry variables begin with openshift_storage_glusterfs_registry_.

The following example of an inventory file illustrates the use of variables when deploying the two GlusterFS node groups:

`[OSEv3:children]
masters
nodes
etcd
glusterfs
glusterfs_registry`

[OSEv3:vars]
install_method=rpm
os_update=false
install_update_docker=true
docker_storage_driver=devicemapper
ansible_ssh_user=root
openshift_release=v3.11
oreg_url=registry.access.redhat.com/openshift3/ose-${component}:v3.11
#openshift_cockpit_deployer_image='registry.redhat.io/openshift3/registry-console:v3.11'
openshift_docker_insecure_registries=registry.access.redhat.com
openshift_deployment_type=openshift-enterprise
openshift_web_console_install=true
openshift_enable_service_catalog=false
osm_use_cockpit=false
osm_cockpit_plugins=['cockpit-kubernetes']
debug_level=5
openshift_set_hostname=true
openshift_override_hostname_check=true
openshift_disable_check=docker_image_availability
openshift_check_min_host_disk_gb=2
openshift_check_min_host_memory_gb=1
openshift_portal_net=172.31.0.0/16
openshift_master_cluster_method=native
openshift_clock_enabled=true
openshift_use_openshift_sdn=true

openshift_master_dynamic_provisioning_enabled=true


# logging
openshift_logging_install_logging=true
openshift_logging_es_pvc_dynamic=true
openshift_logging_kibana_nodeselector={"node-role.kubernetes.io/infra": "true"}
openshift_logging_curator_nodeselector={"node-role.kubernetes.io/infra": "true"}
openshift_logging_es_nodeselector={"node-role.kubernetes.io/infra": "true"}
openshift_logging_es_pvc_size=20Gi
openshift_logging_es_pvc_storage_class_name="glusterfs-registry-block"


# metrics
openshift_metrics_install_metrics=true
openshift_metrics_storage_kind=dynamic
openshift_metrics_hawkular_nodeselector={"node-role.kubernetes.io/infra": "true"}
openshift_metrics_cassandra_nodeselector={"node-role.kubernetes.io/infra": "true"}
openshift_metrics_heapster_nodeselector={"node-role.kubernetes.io/infra": "true"}
openshift_metrics_storage_volume_size=20Gi
openshift_metrics_cassandra_pvc_storage_class_name="glusterfs-registry-block"


# glusterfs
openshift_storage_glusterfs_timeout=900
openshift_storage_glusterfs_namespace=glusterfs
openshift_storage_glusterfs_storageclass=true
openshift_storage_glusterfs_storageclass_default=false
openshift_storage_glusterfs_block_storageclass=true
openshift_storage_glusterfs_block_storageclass_default=false
openshift_storage_glusterfs_block_deploy=true
openshift_storage_glusterfs_block_host_vol_create=true
openshift_storage_glusterfs_block_host_vol_size=100


# glusterfs_registry
openshift_storage_glusterfs_registry_namespace=glusterfs-registry
openshift_storage_glusterfs_registry_storageclass=true
openshift_storage_glusterfs_registry_storageclass_default=false
openshift_storage_glusterfs_registry_block_storageclass=true
openshift_storage_glusterfs_registry_block_storageclass_default=false
openshift_storage_glusterfs_registry_block_deploy=true
openshift_storage_glusterfs_registry_block_host_vol_create=true
openshift_storage_glusterfs_registry_block_host_vol_size=100

# glusterfs_registry_storage
openshift_hosted_registry_storage_kind=glusterfs
openshift_hosted_registry_storage_volume_size=20Gi
openshift_hosted_registry_selector="node-role.kubernetes.io/infra=true"


openshift_storage_glusterfs_heketi_admin_key='adminkey'
openshift_storage_glusterfs_heketi_user_key='heketiuserkey'


openshift_storage_glusterfs_image='registry.access.redhat.com/rhgs3/rhgs-server-rhel7:v3.11'

openshift_storage_glusterfs_heketi_image='registry.access.redhat.com/rhgs3/rhgs-volmanager-rhel7:v3.11'

openshift_storage_glusterfs_block_image='registry.access.redhat.com/rhgs3/rhgs-gluster-block-prov-rhel7:v3.11'


openshift_master_cluster_hostname=node101.redhat.com
openshift_master_cluster_public_hostname=node101.redhat.com

[masters]
node101.redhat.com

[etcd]
node101.redhat.com

[nodes]
node101.redhat.com openshift_node_group_name="node-config-master"
node102.redhat.com openshift_node_group_name="node-config-infra"
node103.redhat.com openshift_node_group_name="node-config-compute"
node104.redhat.com openshift_node_group_name="node-config-compute"
node105.redhat.com openshift_node_group_name="node-config-compute"
node106.redhat.com openshift_node_group_name="node-config-compute"
node107.redhat.com openshift_node_group_name="node-config-compute"
node108.redhat.com openshift_node_group_name="node-config-compute"

[glusterfs]
node103.redhat.com glusterfs_zone=1 glusterfs_devices='["/dev/sdd"]'
node104.redhat.com glusterfs_zone=2 glusterfs_devices='["/dev/sdd"]'
node105.redhat.com glusterfs_zone=3 glusterfs_devices='["/dev/sdd"]'

[glusterfs_registry]
node106.redhat.com glusterfs_zone=1 glusterfs_devices='["/dev/sdd"]'
node107.redhat.com glusterfs_zone=2 glusterfs_devices='["/dev/sdd"]'
node108.redhat.com glusterfs_zone=3 glusterfs_devices='["/dev/sdd"]'

Host variables

Each host in the glusterfs and glusterfs_registry groups must have the glusterfs_devices variable defined. This variable defines the list of block devices that will be managed as part of the GlusterFS cluster. You must have at least one device, which must be bare, with no partitions or LVM PVs.

You can also define the following variables for each host. If they are defined, these variables further control the host configuration as a GlusterFS node:

  • glusterfs_cluster: The ID of the cluster this node belongs to.

  • glusterfs_hostname: A host name or IP address to be used for internal GlusterFS communication.

  • glusterfs_ip: The IP address that the pods use to communicate with the GlusterFS node.

  • glusterfs_zone: A zone number for the node. Within the cluster, zones determine how to distribute the bricks of GlusterFS volumes.

Role variables

To control the integration of a GlusterFS cluster into a new or existing OKD cluster, you can also define a number of role variables, which are stored in the inventory file. Each role variable also has a corresponding variable to optionally configure a separate GlusterFS cluster for use as storage for an integrated Docker registry.

Image name and version tag variables

To prevent OKD pods from upgrading after an outage leading to a cluster with different OKD versions, it is recommended that you specify the image name and version tags for all containerized components. These variables are:

  • openshift_storage_glusterfs_image

  • openshift_storage_glusterfs_block_image

  • openshift_storage_glusterfs_s3_image

  • openshift_storage_glusterfs_heketi_image

The image variables for gluster-block and gluster-s3 are only necessary if the corresponding deployment variables (the variables ending in _block_deploy and _s3_deploy) are true.

For a complete list of variables, see the GlusterFS role README on GitHub.

Once the variables are configured, there are several playbooks available depending on the circumstances of the installation:

  • The main playbook for cluster installations can be used to deploy the GlusterFS clusters in tandem with an initial installation of OKD.

    • This includes deploying an integrated OpenShift Container Registry that uses GlusterFS storage.

    • This does not include OpenShift Logging or OpenShift Metrics, as that is currently still a separate step. See Containerized GlusterFS for OpenShift Logging and Metrics for more information.

  • playbooks/openshift-glusterfs/config.yml can be used to deploy the clusters onto an existing OKD installation.

  • playbooks/openshift-glusterfs/registry.yml can be used to deploy the clusters onto an existing OKD installation. In addition, this will deploy an integrated OpenShift Container Registry which uses GlusterFS storage.

    There must not be a pre-existing registry in the OKD cluster.

  • playbooks/openshift-glusterfs/uninstall.yml can be used to remove existing clusters matching the configuration in the inventory hosts file. This is useful for cleaning up the OKD environment in the case of a failed deployment due to configuration errors.

    The GlusterFS playbooks are not guaranteed to be idempotent.

    Running the playbooks more than once for a given installation is currently not supported without deleting the entire GlusterFS installation (including disk data) and starting over.

Example: Basic Containerized GlusterFS Installation

  1. In your inventory file, include the following variables in the [OSEv3:vars] section, and adjust them as required for your configuration:

    [OSEv3:vars]
...
openshift_storage_glusterfs_namespace=app-storage
openshift_storage_glusterfs_storageclass=true
openshift_storage_glusterfs_storageclass_default=false
openshift_storage_glusterfs_block_deploy=true
openshift_storage_glusterfs_block_host_vol_size=100
openshift_storage_glusterfs_block_storageclass=true
openshift_storage_glusterfs_block_storageclass_default=false

  2. Add glusterfs in the [OSEv3:children] section to enable the [glusterfs] group:

    [OSEv3:children]
masters
nodes
glusterfs

  3. Add a [glusterfs] section with entries for each storage node that will host the GlusterFS storage. For each node, set glusterfs_devices to a list of raw block devices that will be completely managed as part of a GlusterFS cluster. There must be at least one device listed. Each device must be bare, with no partitions or LVM PVs. Specifying the variable takes the form:

    <hostname_or_ip> glusterfs_devices='[ "</path/to/device1/>", "</path/to/device2>", ... ]'

    For example:

    [glusterfs]
node11.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
node12.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
node13.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'

  4. Add the hosts listed under [glusterfs] to the [nodes] group:

    [nodes]
...
node11.example.com openshift_node_group_name="node-config-compute"
node12.example.com openshift_node_group_name="node-config-compute"
node13.example.com openshift_node_group_name="node-config-compute"

    The preceding steps only provide some of the options that must be added to the inventory file. Use the complete inventory file to deploy GlusterFS.

  5. Change to the playbook directory and run the installation playbook. Provide the relative path for the inventory file as an option.

    • For a new OKD installation:

      $ cd /usr/share/ansible/openshift-ansible
$ ansible-playbook -i <path_to_inventory_file> playbooks/prerequisites.yml
$ ansible-playbook -i <path_to_inventory_file> playbooks/deploy_cluster.yml

    • For an installation onto an existing OKD cluster:

      $ cd /usr/share/ansible/openshift-ansible
$ ansible-playbook -i <path_to_inventory_file> playbooks/openshift-glusterfs/config.yml

Example: Basic External GlusterFS Installation

  1. In your inventory file, include the following variables in the [OSEv3:vars] section, and adjust them as required for your configuration:

    [OSEv3:vars]
...
openshift_storage_glusterfs_namespace=app-storage
openshift_storage_glusterfs_storageclass=true
openshift_storage_glusterfs_storageclass_default=false
openshift_storage_glusterfs_block_deploy=true
openshift_storage_glusterfs_block_host_vol_size=100
openshift_storage_glusterfs_block_storageclass=true
openshift_storage_glusterfs_block_storageclass_default=false
openshift_storage_glusterfs_is_native=false
openshift_storage_glusterfs_heketi_is_native=true
openshift_storage_glusterfs_heketi_executor=ssh
openshift_storage_glusterfs_heketi_ssh_port=22
openshift_storage_glusterfs_heketi_ssh_user=root
openshift_storage_glusterfs_heketi_ssh_sudo=false
openshift_storage_glusterfs_heketi_ssh_keyfile="/root/.ssh/id_rsa"

  2. Add glusterfs in the [OSEv3:children] section to enable the [glusterfs] group:

    [OSEv3:children]
masters
nodes
glusterfs

  3. Add a [glusterfs] section with entries for each storage node that will host the GlusterFS storage. For each node, set glusterfs_devices to a list of raw block devices that will be completely managed as part of a GlusterFS cluster. There must be at least one device listed. Each device must be bare, with no partitions or LVM PVs. Also, set glusterfs_ip to the IP address of the node. Specifying the variable takes the form:

    <hostname_or_ip> glusterfs_ip=<ip_address> glusterfs_devices='[ "</path/to/device1/>", "</path/to/device2>", ... ]'

    For example:

    [glusterfs]
gluster1.example.com glusterfs_ip=192.168.10.11 glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
gluster2.example.com glusterfs_ip=192.168.10.12 glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
gluster3.example.com glusterfs_ip=192.168.10.13 glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'

    The preceding steps only provide some of the options that must be added to the inventory file. Use the complete inventory file to deploy GlusterFS.

  4. Change to the playbook directory and run the installation playbook. Provide the relative path for the inventory file as an option.

    • For a new OKD installation:

      $ cd /usr/share/ansible/openshift-ansible
$ ansible-playbook -i <path_to_inventory_file> playbooks/prerequisites.yml
$ ansible-playbook -i <path_to_inventory_file> playbooks/deploy_cluster.yml

    • For an installation onto an existing OKD cluster:

      $ cd /usr/share/ansible/openshift-ansible
$ ansible-playbook -i <path_to_inventory_file> playbooks/openshift-glusterfs/config.yml

Example: Containerized GlusterFS with an Integrated OpenShift Container Registry

  1. In your inventory file, set the following variable under [OSEv3:vars] section, and adjust them as required for your configuration:

    [OSEv3:vars]
...
openshift_hosted_registry_storage_kind=glusterfs (1)
openshift_hosted_registry_storage_volume_size=5Gi
openshift_hosted_registry_selector='node-role.kubernetes.io/infra=true'
    1 Running the integrated OpenShift Container Registry, on infrastructure nodes is recommended. Infrastructure node are nodes dedicated to running applications deployed by administrators to provide services for the OKD cluster.

  2. Add glusterfs_registry in the [OSEv3:children] section to enable the [glusterfs_registry] group:

    [OSEv3:children]
masters
nodes
glusterfs_registry

  3. Add a [glusterfs_registry] section with entries for each storage node that will host the GlusterFS storage. For each node, set glusterfs_devices to a list of raw block devices that will be completely managed as part of a GlusterFS cluster. There must be at least one device listed. Each device must be bare, with no partitions or LVM PVs. Specifying the variable takes the form:

    <hostname_or_ip> glusterfs_devices='[ "</path/to/device1/>", "</path/to/device2>", ... ]'

    For example:

    [glusterfs_registry]
node11.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
node12.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
node13.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'

  4. Add the hosts listed under [glusterfs_registry] to the [nodes] group:

    [nodes]
...
node11.example.com openshift_node_group_name="node-config-infra"
node12.example.com openshift_node_group_name="node-config-infra"
node13.example.com openshift_node_group_name="node-config-infra"

    The preceding steps only provide some of the options that must be added to the inventory file. Use the complete inventory file to deploy GlusterFS.

  5. Change to the playbook directory and run the installation playbook. Provide the relative path for the inventory file as an option.

    • For a new OKD installation:

      $ cd /usr/share/ansible/openshift-ansible
$ ansible-playbook -i <path_to_inventory_file> playbooks/prerequisites.yml
$ ansible-playbook -i <path_to_inventory_file> playbooks/deploy_cluster.yml

    • For an installation onto an existing OKD cluster:

      $ cd /usr/share/ansible/openshift-ansible
$ ansible-playbook -i <path_to_inventory_file> playbooks/openshift-glusterfs/config.yml

Example: Containerized GlusterFS for OpenShift Logging and Metrics

  1. In your inventory file, set the following variables under [OSEv3:vars] section, and adjust them as required for your configuration:

    [OSEv3:vars]
...

openshift_metrics_install_metrics=true
openshift_metrics_hawkular_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_metrics_cassandra_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_metrics_heapster_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_metrics_storage_kind=dynamic
openshift_metrics_storage_volume_size=10Gi
openshift_metrics_cassandra_pvc_storage_class_name="glusterfs-registry-block" (2)

openshift_logging_install_logging=true
openshift_logging_kibana_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_logging_curator_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_logging_es_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_logging_storage_kind=dynamic
openshift_logging_es_pvc_size=10Gi                        (3)
openshift_logging_elasticsearch_storage_type=pvc             (4)
openshift_logging_es_pvc_storage_class_name="glusterfs-registry-block"       (2)

openshift_storage_glusterfs_registry_namespace=infra-storage
openshift_storage_glusterfs_registry_block_deploy=true
openshift_storage_glusterfs_registry_block_host_vol_size=100
openshift_storage_glusterfs_registry_block_storageclass=true
openshift_storage_glusterfs_registry_block_storageclass_default=false
    1 It is recommended to run the integrated OpenShift Container Registry, Logging, and Metrics on nodes dedicated to "infrastructure" applications, that is applications deployed by administrators to provide services for the OKD cluster.
    2 Specify the StorageClass to be used for Logging and Metrics. This name is generated from the name of the target GlusterFS cluster (e.g., glusterfs-<name>-block). In this example, this defaults to registry.
    3 OpenShift Logging requires that a PVC size be specified. The supplied value is only an example, not a recommendation.
    4 If using Persistent Elasticsearch Storage, set the storage type to pvc.

    See the GlusterFS role README for details on these and other variables.

  2. Add glusterfs_registry in the [OSEv3:children] section to enable the [glusterfs_registry] group:

    [OSEv3:children]
masters
nodes
glusterfs_registry

  3. Add a [glusterfs_registry] section with entries for each storage node that will host the GlusterFS storage. For each node, set glusterfs_devices to a list of raw block devices that will be completely managed as part of a GlusterFS cluster. There must be at least one device listed. Each device must be bare, with no partitions or LVM PVs. Specifying the variable takes the form:

    <hostname_or_ip> glusterfs_devices='[ "</path/to/device1/>", "</path/to/device2>", ... ]'

    For example:

    [glusterfs_registry]
node11.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
node12.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
node13.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'

  4. Add the hosts listed under [glusterfs_registry] to the [nodes] group:

    [nodes]
...
node11.example.com openshift_node_group_name="node-config-infra"
node12.example.com openshift_node_group_name="node-config-infra"
node13.example.com openshift_node_group_name="node-config-infra"

    The preceding steps only provide some of the options that must be added to the inventory file. Use the complete inventory file to deploy GlusterFS.

  5. Change to the playbook directory and run the installation playbook. Provide the relative path for the inventory file as an option.

    • For a new OKD installation:

      $ cd /usr/share/ansible/openshift-ansible
$ ansible-playbook -i <path_to_inventory_file> playbooks/prerequisites.yml
$ ansible-playbook -i <path_to_inventory_file> playbooks/deploy_cluster.yml

    • For an installation onto an existing OKD cluster:

      $ cd /usr/share/ansible/openshift-ansible
$ ansible-playbook -i <path_to_inventory_file> playbooks/openshift-glusterfs/config.yml

Example: Containerized GlusterFS for Applications, Registry, Logging, and Metrics

  1. In your inventory file, set the following variables under [OSEv3:vars] section, and adjust them as required for your configuration:

    [OSEv3:vars]
...
openshift_hosted_registry_storage_kind=glusterfs (1)
openshift_hosted_registry_storage_volume_size=5Gi
openshift_hosted_registry_selector='node-role.kubernetes.io/infra=true'

openshift_metrics_install_metrics=true
openshift_metrics_hawkular_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_metrics_cassandra_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_metrics_heapster_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_metrics_storage_kind=dynamic
openshift_metrics_storage_volume_size=10Gi
openshift_metrics_cassandra_pvc_storage_class_name="glusterfs-registry-block" (2)

openshift_logging_install_logging=true
openshift_logging_kibana_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_logging_curator_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_logging_es_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_logging_storage_kind=dynamic
openshift_logging_es_pvc_size=10Gi                        (3)
openshift_logging_elasticsearch_storage_type=pvc              (4)
openshift_logging_es_pvc_storage_class_name="glusterfs-registry-block"       (2)

openshift_storage_glusterfs_namespace=app-storage
openshift_storage_glusterfs_storageclass=true
openshift_storage_glusterfs_storageclass_default=false
openshift_storage_glusterfs_block_deploy=true
openshift_storage_glusterfs_block_host_vol_size=100       (5)
openshift_storage_glusterfs_block_storageclass=true
openshift_storage_glusterfs_block_storageclass_default=false

openshift_storage_glusterfs_registry_namespace=infra-storage
openshift_storage_glusterfs_registry_block_deploy=true
openshift_storage_glusterfs_registry_block_host_vol_size=100
openshift_storage_glusterfs_registry_block_storageclass=true
openshift_storage_glusterfs_registry_block_storageclass_default=false
    1 Running the integrated OpenShift Container Registry, Logging, and Metrics on infrastructure nodes is recommended. Infrastructure node are nodes dedicated to running applications deployed by administrators to provide services for the OKD cluster.
    2 Specify the StorageClass to be used for Logging and Metrics. This name is generated from the name of the target GlusterFS cluster, for example glusterfs-<name>-block. In this example, <name> defaults to registry.
    3 Specifying a PVC size is required for OpenShift Logging. The supplied value is only an example, not a recommendation.
    4 If using Persistent Elasticsearch Storage, set the storage type to pvc.
    5 Size, in GB, of GlusterFS volumes that will be automatically created to host glusterblock volumes. This variable is used only if there is not enough space is available for a glusterblock volume create request. This value represents an upper limit on the size of glusterblock volumes unless you manually create larger GlusterFS block-hosting volumes.

  2. Add glusterfs and glusterfs_registry in the [OSEv3:children] section to enable the [glusterfs] and [glusterfs_registry] groups:

    [OSEv3:children]
...
glusterfs
glusterfs_registry

  3. Add [glusterfs] and [glusterfs_registry] sections with entries for each storage node that will host the GlusterFS storage. For each node, set glusterfs_devices to a list of raw block devices that will be completely managed as part of a GlusterFS cluster. There must be at least one device listed. Each device must be bare, with no partitions or LVM PVs. Specifying the variable takes the form:

    <hostname_or_ip> glusterfs_devices='[ "</path/to/device1/>", "</path/to/device2>", ... ]'

    For example:

    [glusterfs]
node11.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
node12.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
node13.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'

[glusterfs_registry]
node14.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
node15.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
node16.example.com glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'

  4. Add the hosts listed under [glusterfs] and [glusterfs_registry] to the [nodes] group:

    [nodes]
...
node11.example.com openshift_node_group_name='node-config-compute'   (1)
node12.example.com openshift_node_group_name='node-config-compute'   (1)
node13.example.com openshift_node_group_name='node-config-compute'   (1)
node14.example.com openshift_node_group_name='node-config-infra'" (1)
node15.example.com openshift_node_group_name='node-config-infra'" (1)
node16.example.com openshift_node_group_name='node-config-infra'" (1)
    1 The nodes are marked to denote whether they will allow general applications or infrastructure applications to be scheduled on them. It is up to the administrator to configure how applications will be constrained.

    The preceding steps only provide some of the options that must be added to the inventory file. Use the complete inventory file to deploy GlusterFS.

  5. Change to the playbook directory and run the installation playbook. Provide the relative path for the inventory file as an option.

    • For a new OKD installation:

      $ cd /usr/share/ansible/openshift-ansible
$ ansible-playbook -i <path_to_inventory_file> playbooks/prerequisites.yml
$ ansible-playbook -i <path_to_inventory_file> playbooks/deploy_cluster.yml

    • For an installation onto an existing OKD cluster:

      $ cd /usr/share/ansible/openshift-ansible
$ ansible-playbook -i <path_to_inventory_file> playbooks/openshift-glusterfs/config.yml

Example: External GlusterFS for Applications, Registry, Logging, and Metrics

  1. In your inventory file, set the following variables under [OSEv3:vars] section, and adjust them as required for your configuration:

    [OSEv3:vars]
...
openshift_hosted_registry_storage_kind=glusterfs (1)
openshift_hosted_registry_storage_volume_size=5Gi
openshift_hosted_registry_selector='node-role.kubernetes.io/infra=true'

openshift_metrics_install_metrics=true
openshift_metrics_hawkular_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_metrics_cassandra_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_metrics_heapster_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_metrics_storage_kind=dynamic
openshift_metrics_storage_volume_size=10Gi
openshift_metrics_cassandra_pvc_storage_class_name="glusterfs-registry-block" (2)

openshift_logging_install_logging=true
openshift_logging_kibana_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_logging_curator_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_logging_es_nodeselector={"node-role.kubernetes.io/infra": "true"} (1)
openshift_logging_storage_kind=dynamic
openshift_logging_es_pvc_size=10Gi                        (3)
openshift_logging_elasticsearch_storage_type              (4)
openshift_logging_es_pvc_storage_class_name="glusterfs-registry-block"       (2)

openshift_storage_glusterfs_namespace=app-storage
openshift_storage_glusterfs_storageclass=true
openshift_storage_glusterfs_storageclass_default=false
openshift_storage_glusterfs_block_deploy=true
openshift_storage_glusterfs_block_host_vol_size=100       (5)
openshift_storage_glusterfs_block_storageclass=true
openshift_storage_glusterfs_block_storageclass_default=false
openshift_storage_glusterfs_is_native=false
openshift_storage_glusterfs_heketi_is_native=true
openshift_storage_glusterfs_heketi_executor=ssh
openshift_storage_glusterfs_heketi_ssh_port=22
openshift_storage_glusterfs_heketi_ssh_user=root
openshift_storage_glusterfs_heketi_ssh_sudo=false
openshift_storage_glusterfs_heketi_ssh_keyfile="/root/.ssh/id_rsa"

openshift_storage_glusterfs_registry_namespace=infra-storage
openshift_storage_glusterfs_registry_block_deploy=true
openshift_storage_glusterfs_registry_block_host_vol_size=100
openshift_storage_glusterfs_registry_block_storageclass=true
openshift_storage_glusterfs_registry_block_storageclass_default=false
openshift_storage_glusterfs_registry_is_native=false
openshift_storage_glusterfs_registry_heketi_is_native=true
openshift_storage_glusterfs_registry_heketi_executor=ssh
openshift_storage_glusterfs_registry_heketi_ssh_port=22
openshift_storage_glusterfs_registry_heketi_ssh_user=root
openshift_storage_glusterfs_registry_heketi_ssh_sudo=false
openshift_storage_glusterfs_registry_heketi_ssh_keyfile="/root/.ssh/id_rsa"
    1 It is recommended to run the integrated OpenShift Container Registry on nodes dedicated to "infrastructure" applications, that is applications deployed by administrators to provide services for the OKD cluster. It is up to the administrator to select and label nodes for infrastructure applications.
    2 Specify the StorageClass to be used for Logging and Metrics. This name is generated from the name of the target GlusterFS cluster (e.g., glusterfs-<name>-block). In this example, this defaults to registry.
    3 OpenShift Logging requires that a PVC size be specified. The supplied value is only an example, not a recommendation.
    4 If using Persistent Elasticsearch Storage, set the storage type to pvc.
    5 Size, in GB, of GlusterFS volumes that will be automatically created to host glusterblock volumes. This variable is used only if there is not enough space is available for a glusterblock volume create request. This value represents an upper limit on the size of glusterblock volumes unless you manually create larger GlusterFS block-hosting volumes.

  2. Add glusterfs and glusterfs_registry in the [OSEv3:children] section to enable the [glusterfs] and [glusterfs_registry] groups:

    [OSEv3:children]
...
glusterfs
glusterfs_registry

  3. Add [glusterfs] and [glusterfs_registry] sections with entries for each storage node that will host the GlusterFS storage. For each node, set glusterfs_devices to a list of raw block devices that will be completely managed as part of a GlusterFS cluster. There must be at least one device listed. Each device must be bare, with no partitions or LVM PVs. Also, set glusterfs_ip to the IP address of the node. Specifying the variable takes the form:

    <hostname_or_ip> glusterfs_ip=<ip_address> glusterfs_devices='[ "</path/to/device1/>", "</path/to/device2>", ... ]'

    For example:

    [glusterfs]
gluster1.example.com glusterfs_ip=192.168.10.11 glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
gluster2.example.com glusterfs_ip=192.168.10.12 glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
gluster3.example.com glusterfs_ip=192.168.10.13 glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'

[glusterfs_registry]
gluster4.example.com glusterfs_ip=192.168.10.14 glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
gluster5.example.com glusterfs_ip=192.168.10.15 glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'
gluster6.example.com glusterfs_ip=192.168.10.16 glusterfs_devices='[ "/dev/xvdc", "/dev/xvdd" ]'

    The preceding steps only provide some of the options that must be added to the inventory file. Use the complete inventory file to deploy GlusterFS.

  4. Change to the playbook directory and run the installation playbook. Provide the relative path for the inventory file as an option.

    • For a new OKD installation:

      $ cd /usr/share/ansible/openshift-ansible
$ ansible-playbook -i <path_to_inventory_file> playbooks/prerequisites.yml
$ ansible-playbook -i <path_to_inventory_file> playbooks/deploy_cluster.yml

    • For an installation onto an existing OKD cluster:

      $ cd /usr/share/ansible/openshift-ansible
$ ansible-playbook -i <path_to_inventory_file> playbooks/openshift-glusterfs/config.yml

Uninstall Containerized GlusterFS

For Containerized GlusterFS, an OKD install comes with a playbook to uninstall all resources and artifacts from the cluster. To use the playbook, provide the original inventory file that was used to install the target instance of Containerized GlusterFS, change to the playbook directory, and run the following playbook:

$ cd /usr/share/ansible/openshift-ansible
$ ansible-playbook -i <path_to_inventory_file> playbooks/openshift-glusterfs/uninstall.yml

In addition, the playbook supports the use of a variable called openshift_storage_glusterfs_wipe which, when enabled, destroys any data on the block devices that were used for GlusterFS backend storage. To use the openshift_storage_glusterfs_wipe variable, change to the playbook directory and run the following playbook:

$ cd /usr/share/ansible/openshift-ansible
$ ansible-playbook -i <path_to_inventory_file> -e \
  "openshift_storage_glusterfs_wipe=true" \
  playbooks/openshift-glusterfs/uninstall.yml

This procedure destroys data. Proceed with caution.

Provisioning

GlusterFS volumes can be provisioned either statically or dynamically. Static provisioning is available with all configurations. Only Containerized GlusterFS and External GlusterFS support dynamic provisioning.

Static Provisioning

  1. To enable static provisioning, first create a GlusterFS volume. See the GlusterFS Administration Guide for information on how to do this using the gluster command-line interface or the heketi project site for information on how to do this using heketi-cli. For this example, the volume will be named myVol1.

  2. Define the following Service and Endpoints in gluster-endpoints.yaml:

    ---
apiVersion: v1
kind: Service
metadata:
  name: glusterfs-cluster (1)
spec:
  ports:
  - port: 1
---
apiVersion: v1
kind: Endpoints
metadata:
  name: glusterfs-cluster (1)
subsets:
  - addresses:
      - ip: 192.168.122.221 (2)
    ports:
      - port: 1 (3)
  - addresses:
      - ip: 192.168.122.222 (2)
    ports:
      - port: 1 (3)
  - addresses:
      - ip: 192.168.122.223 (2)
    ports:
      - port: 1 (3)
    1 These names must match.
    2 The ip values must be the actual IP addresses of a GlusterFS server, not hostnames.
    3 The port number is ignored.

  3. From the OKD master host, create the Service and Endpoints:

    $ oc create -f gluster-endpoints.yaml
service "glusterfs-cluster" created
endpoints "glusterfs-cluster" created

  4. Verify that the Service and Endpoints were created:

    $ oc get services
NAME                       CLUSTER_IP       EXTERNAL_IP   PORT(S)    SELECTOR        AGE
glusterfs-cluster          172.30.205.34    <none>        1/TCP      <none>          44s

$ oc get endpoints
NAME                ENDPOINTS                                               AGE
docker-registry     10.1.0.3:5000                                           4h
glusterfs-cluster   192.168.122.221:1,192.168.122.222:1,192.168.122.223:1   11s
kubernetes          172.16.35.3:8443                                        4d

    Endpoints are unique per project. Each project accessing the GlusterFS volume needs its own Endpoints.

  5. In order to access the volume, the container must run with either a user ID (UID) or group ID (GID) that has access to the file system on the volume. This information can be discovered in the following manner:

    $ mkdir -p /mnt/glusterfs/myVol1

$ mount -t glusterfs 192.168.122.221:/myVol1 /mnt/glusterfs/myVol1

$ ls -lnZ /mnt/glusterfs/
drwxrwx---. 592 590 system_u:object_r:fusefs_t:s0    myVol1  (1) (2)
    1 The UID is 592.
    2 The GID is 590.

  6. Define the following PersistentVolume (PV) in gluster-pv.yaml:

    apiVersion: v1
kind: PersistentVolume
metadata:
  name: gluster-default-volume (1)
  annotations:
    pv.beta.kubernetes.io/gid: "590" (2)
spec:
  capacity:
    storage: 2Gi (3)
  accessModes: (4)
    - ReadWriteMany
  glusterfs:
    endpoints: glusterfs-cluster (5)
    path: myVol1 (6)
    readOnly: false
  persistentVolumeReclaimPolicy: Retain
    1 The name of the volume.
    2 The GID on the root of the GlusterFS volume.
    3 The amount of storage allocated to this volume.
    4 accessModes are used as labels to match a PV and a PVC. They currently do not define any form of access control.
    5 The Endpoints resource previously created.
    6 The GlusterFS volume that will be accessed.

  7. From the OKD master host, create the PV:

    $ oc create -f gluster-pv.yaml

  8. Verify that the PV was created:

    $ oc get pv
NAME                     LABELS    CAPACITY     ACCESSMODES   STATUS      CLAIM     REASON    AGE
gluster-default-volume   <none>    2147483648   RWX           Available                       2s

  9. Create a PersistentVolumeClaim (PVC) that will bind to the new PV in gluster-claim.yaml:

    apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: gluster-claim  (1)
spec:
  accessModes:
  - ReadWriteMany      (2)
  resources:
     requests:
       storage: 1Gi    (3)
    1 The claim name is referenced by the pod under its volumes section.
    2 Must match the accessModes of the PV.
    3 This claim will look for PVs offering 1Gi or greater capacity.

  10. From the OKD master host, create the PVC:

    $ oc create -f gluster-claim.yaml

  11. Verify that the PV and PVC are bound:

    $ oc get pv
NAME         LABELS    CAPACITY   ACCESSMODES   STATUS      CLAIM          REASON    AGE
gluster-pv   <none>    1Gi        RWX           Available   gluster-claim            37s

$ oc get pvc
NAME            LABELS    STATUS    VOLUME       CAPACITY   ACCESSMODES   AGE
gluster-claim   <none>    Bound     gluster-pv   1Gi        RWX           24s

PVCs are unique per project. Each project accessing the GlusterFS volume needs its own PVC. PVs are not bound to a single project, so PVCs across multiple projects may refer to the same PV.

Dynamic Provisioning

  1. To enable dynamic provisioning, first create a StorageClass object definition. The definition below is based on the minimum requirements needed for this example to work with OKD. See Dynamic Provisioning and Creating Storage Classes for additional parameters and specification definitions.

    kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
  name: glusterfs
provisioner: kubernetes.io/glusterfs
parameters:
  resturl: "http://10.42.0.0:8080" (1)
  restauthenabled: "false" (2)
    1 The heketi server URL.
    2 Since authentication is not turned on in this example, set to false.

  2. From the OKD master host, create the StorageClass:

    # oc create -f gluster-storage-class.yaml
storageclass "glusterfs" created

  3. Create a PVC using the newly-created StorageClass. For example:

    apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: gluster1
spec:
  accessModes:
  - ReadWriteMany
  resources:
    requests:
      storage: 30Gi
  storageClassName: glusterfs

  4. From the OKD master host, create the PVC:

    # oc create -f glusterfs-dyn-pvc.yaml
persistentvolumeclaim "gluster1" created

  5. View the PVC to see that the volume was dynamically created and bound to the PVC:

    # oc get pvc
NAME       STATUS   VOLUME                                     CAPACITY   ACCESSMODES   STORAGECLASS   AGE
gluster1   Bound    pvc-78852230-d8e2-11e6-a3fa-0800279cf26f   30Gi       RWX           glusterfs      42s