×
Description

Build encapsulates the inputs needed to produce a new deployable image, as well as the status of the execution and a reference to the Pod which executed the build.

Type

object

Specification

Property Type Description

apiVersion

string

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

kind

string

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

metadata

ObjectMeta

spec

object

BuildSpec has the information to represent a build and also additional information about a build

status

object

BuildStatus contains the status of a build

.spec

Description

BuildSpec has the information to represent a build and also additional information about a build

Type

object

Required
  • strategy

Property Type Description

completionDeadlineSeconds

integer

completionDeadlineSeconds is an optional duration in seconds, counted from the time when a build pod gets scheduled in the system, that the build may be active on a node before the system actively tries to terminate the build; value must be positive integer

mountTrustedCA

boolean

mountTrustedCA bind mounts the cluster’s trusted certificate authorities, as defined in the cluster’s proxy configuration, into the build. This lets processes within a build trust components signed by custom PKI certificate authorities, such as private artifact repositories and HTTPS proxies.

When this field is set to true, the contents of /etc/pki/ca-trust within the build are managed by the build container, and any changes to this directory or its subdirectories (for example - within a Dockerfile RUN instruction) are not persisted in the build’s output image.

nodeSelector

object (string)

nodeSelector is a selector which must be true for the build pod to fit on a node If nil, it can be overridden by default build nodeselector values for the cluster. If set to an empty map or a map with any values, default build nodeselector values are ignored.

output

object

BuildOutput is input to a build strategy and describes the container image that the strategy should produce.

postCommit

object

A BuildPostCommitSpec holds a build post commit hook specification. The hook executes a command in a temporary container running the build output image, immediately after the last layer of the image is committed and before the image is pushed to a registry. The command is executed with the current working directory ($PWD) set to the image’s WORKDIR.

The build will be marked as failed if the hook execution fails. It will fail if the script or command return a non-zero exit code, or if there is any other error related to starting the temporary container.

There are five different ways to configure the hook. As an example, all forms below are equivalent and will execute rake test --verbose.

1. Shell script:

"postCommit": { "script": "rake test --verbose", }

The above is a convenient form which is equivalent to:

"postCommit": { "command": ["/bin/sh", "-ic"], "args": ["rake test --verbose"] }

2. A command as the image entrypoint:

"postCommit": { "commit": ["rake", "test", "--verbose"] }

Command overrides the image entrypoint in the exec form, as documented in Docker: https://docs.docker.com/engine/reference/builder/#entrypoint.

3. Pass arguments to the default entrypoint:

"postCommit": { "args": ["rake", "test", "--verbose"] }

This form is only useful if the image entrypoint can handle arguments.

4. Shell script with arguments:

"postCommit": { "script": "rake test $1", "args": ["--verbose"] }

This form is useful if you need to pass arguments that would otherwise be hard to quote properly in the shell script. In the script, $0 will be "/bin/sh" and $1, $2, etc, are the positional arguments from Args.

5. Command with arguments:

"postCommit": { "command": ["rake", "test"], "args": ["--verbose"] }

This form is equivalent to appending the arguments to the Command slice.

It is invalid to provide both Script and Command simultaneously. If none of the fields are specified, the hook is not executed.

resources

ResourceRequirements

resources computes resource requirements to execute the build.

revision

object

SourceRevision is the revision or commit information from the source for the build

serviceAccount

string

serviceAccount is the name of the ServiceAccount to use to run the pod created by this build. The pod will be allowed to use secrets referenced by the ServiceAccount

source

object

BuildSource is the SCM used for the build.

strategy

object

BuildStrategy contains the details of how to perform a build.

triggeredBy

array

triggeredBy describes which triggers started the most recent update to the build configuration and contains information about those triggers.

triggeredBy[]

object

BuildTriggerCause holds information about a triggered build. It is used for displaying build trigger data for each build and build configuration in oc describe. It is also used to describe which triggers led to the most recent update in the build configuration.

.spec.output

Description

BuildOutput is input to a build strategy and describes the container image that the strategy should produce.

Type

object

Property Type Description

imageLabels

array

imageLabels define a list of labels that are applied to the resulting image. If there are multiple labels with the same name then the last one in the list is used.

imageLabels[]

object

ImageLabel represents a label applied to the resulting image.

pushSecret

LocalObjectReference_v2

PushSecret is the name of a Secret that would be used for setting up the authentication for executing the Docker push to authentication enabled Docker Registry (or Docker Hub).

to

ObjectReference_v2

to defines an optional location to push the output of this build to. Kind must be one of 'ImageStreamTag' or 'DockerImage'. This value will be used to look up a container image repository to push to. In the case of an ImageStreamTag, the ImageStreamTag will be looked for in the namespace of the build unless Namespace is specified.

.spec.output.imageLabels

Description

imageLabels define a list of labels that are applied to the resulting image. If there are multiple labels with the same name then the last one in the list is used.

Type

array

.spec.output.imageLabels[]

Description

ImageLabel represents a label applied to the resulting image.

Type

object

Required
  • name

Property Type Description

name

string

name defines the name of the label. It must have non-zero length.

value

string

value defines the literal value of the label.

.spec.postCommit

Description

A BuildPostCommitSpec holds a build post commit hook specification. The hook executes a command in a temporary container running the build output image, immediately after the last layer of the image is committed and before the image is pushed to a registry. The command is executed with the current working directory ($PWD) set to the image’s WORKDIR.

The build will be marked as failed if the hook execution fails. It will fail if the script or command return a non-zero exit code, or if there is any other error related to starting the temporary container.

There are five different ways to configure the hook. As an example, all forms below are equivalent and will execute rake test --verbose.

  1. Shell script:

    "postCommit": {
      "script": "rake test --verbose",
    }
    The above is a convenient form which is equivalent to:
    "postCommit": {
      "command": ["/bin/sh", "-ic"],
      "args":    ["rake test --verbose"]
    }
  2. A command as the image entrypoint:

    "postCommit": {
      "commit": ["rake", "test", "--verbose"]
    }
    Command overrides the image entrypoint in the exec form, as documented in
    Docker: https://docs.docker.com/engine/reference/builder/#entrypoint.
  3. Pass arguments to the default entrypoint:

    "postCommit": {
     "args": ["rake", "test", "--verbose"]
    }
    This form is only useful if the image entrypoint can handle arguments.
  4. Shell script with arguments:

    "postCommit": {
      "script": "rake test $1",
      "args":   ["--verbose"]
    }
    This form is useful if you need to pass arguments that would otherwise be
    hard to quote properly in the shell script. In the script, $0 will be
    "/bin/sh" and $1, $2, etc, are the positional arguments from Args.
  5. Command with arguments:

    "postCommit": {
      "command": ["rake", "test"],
      "args":    ["--verbose"]
    }
    This form is equivalent to appending the arguments to the Command slice.

It is invalid to provide both Script and Command simultaneously. If none of the fields are specified, the hook is not executed.

Type

object

Property Type Description

args

array (string)

args is a list of arguments that are provided to either Command, Script or the container image’s default entrypoint. The arguments are placed immediately after the command to be run.

command

array (string)

command is the command to run. It may not be specified with Script. This might be needed if the image doesn’t have /bin/sh, or if you do not want to use a shell. In all other cases, using Script might be more convenient.

script

string

script is a shell script to be run with /bin/sh -ic. It may not be specified with Command. Use Script when a shell script is appropriate to execute the post build hook, for example for running unit tests with rake test. If you need control over the image entrypoint, or if the image does not have /bin/sh, use Command and/or Args. The -i flag is needed to support CentOS and RHEL images that use Software Collections (SCL), in order to have the appropriate collections enabled in the shell. E.g., in the Ruby image, this is necessary to make ruby, bundle and other binaries available in the PATH.

.spec.revision

Description

SourceRevision is the revision or commit information from the source for the build

Type

object

Required
  • type

Property Type Description

git

object

GitSourceRevision is the commit information from a git source for a build

type

string

type of the build source, may be one of 'Source', 'Dockerfile', 'Binary', or 'Images'

.spec.revision.git

Description

GitSourceRevision is the commit information from a git source for a build

Type

object

Property Type Description

author

object

SourceControlUser defines the identity of a user of source control

commit

string

commit is the commit hash identifying a specific commit

committer

object

SourceControlUser defines the identity of a user of source control

message

string

message is the description of a specific commit

.spec.revision.git.author

Description

SourceControlUser defines the identity of a user of source control

Type

object

Property Type Description

email

string

email of the source control user

name

string

name of the source control user

.spec.revision.git.committer

Description

SourceControlUser defines the identity of a user of source control

Type

object

Property Type Description

email

string

email of the source control user

name

string

name of the source control user

.spec.source

Description

BuildSource is the SCM used for the build.

Type

object

Property Type Description

binary

object

BinaryBuildSource describes a binary file to be used for the Docker and Source build strategies, where the file will be extracted and used as the build source.

configMaps

array

configMaps represents a list of configMaps and their destinations that will be used for the build.

configMaps[]

object

ConfigMapBuildSource describes a configmap and its destination directory that will be used only at the build time. The content of the configmap referenced here will be copied into the destination directory instead of mounting.

contextDir

string

contextDir specifies the sub-directory where the source code for the application exists. This allows to have buildable sources in directory other than root of repository.

dockerfile

string

dockerfile is the raw contents of a Dockerfile which should be built. When this option is specified, the FROM may be modified based on your strategy base image and additional ENV stanzas from your strategy environment will be added after the FROM, but before the rest of your Dockerfile stanzas. The Dockerfile source type may be used with other options like git - in those cases the Git repo will have any innate Dockerfile replaced in the context dir.

git

object

GitBuildSource defines the parameters of a Git SCM

images

array

images describes a set of images to be used to provide source for the build

images[]

object

ImageSource is used to describe build source that will be extracted from an image or used during a multi stage build. A reference of type ImageStreamTag, ImageStreamImage or DockerImage may be used. A pull secret can be specified to pull the image from an external registry or override the default service account secret if pulling from the internal registry. Image sources can either be used to extract content from an image and place it into the build context along with the repository source, or used directly during a multi-stage container image build to allow content to be copied without overwriting the contents of the repository source (see the 'paths' and 'as' fields).

secrets

array

secrets represents a list of secrets and their destinations that will be used only for the build.

secrets[]

object

SecretBuildSource describes a secret and its destination directory that will be used only at the build time. The content of the secret referenced here will be copied into the destination directory instead of mounting.

sourceSecret

LocalObjectReference_v2

sourceSecret is the name of a Secret that would be used for setting up the authentication for cloning private repository. The secret contains valid credentials for remote repository, where the data’s key represent the authentication method to be used and value is the base64 encoded credentials. Supported auth methods are: ssh-privatekey.

type

string

type of build input to accept

.spec.source.binary

Description

BinaryBuildSource describes a binary file to be used for the Docker and Source build strategies, where the file will be extracted and used as the build source.

Type

object

Property Type Description

asFile

string

asFile indicates that the provided binary input should be considered a single file within the build input. For example, specifying "webapp.war" would place the provided binary as /webapp.war for the builder. If left empty, the Docker and Source build strategies assume this file is a zip, tar, or tar.gz file and extract it as the source. The custom strategy receives this binary as standard input. This filename may not contain slashes or be '..' or '.'.

.spec.source.configMaps

Description

configMaps represents a list of configMaps and their destinations that will be used for the build.

Type

array

.spec.source.configMaps[]

Description

ConfigMapBuildSource describes a configmap and its destination directory that will be used only at the build time. The content of the configmap referenced here will be copied into the destination directory instead of mounting.

Type

object

Required
  • configMap

Property Type Description

configMap

LocalObjectReference_v2

configMap is a reference to an existing configmap that you want to use in your build.

destinationDir

string

destinationDir is the directory where the files from the configmap should be available for the build time. For the Source build strategy, these will be injected into a container where the assemble script runs. For the container image build strategy, these will be copied into the build directory, where the Dockerfile is located, so users can ADD or COPY them during container image build.

.spec.source.git

Description

GitBuildSource defines the parameters of a Git SCM

Type

object

Required
  • uri

Property Type Description

httpProxy

string

httpProxy is a proxy used to reach the git repository over http

httpsProxy

string

httpsProxy is a proxy used to reach the git repository over https

noProxy

string

noProxy is the list of domains for which the proxy should not be used

ref

string

ref is the branch/tag/ref to build.

uri

string

uri points to the source that will be built. The structure of the source will depend on the type of build to run

.spec.source.images

Description

images describes a set of images to be used to provide source for the build

Type

array

.spec.source.images[]

Description

ImageSource is used to describe build source that will be extracted from an image or used during a multi stage build. A reference of type ImageStreamTag, ImageStreamImage or DockerImage may be used. A pull secret can be specified to pull the image from an external registry or override the default service account secret if pulling from the internal registry. Image sources can either be used to extract content from an image and place it into the build context along with the repository source, or used directly during a multi-stage container image build to allow content to be copied without overwriting the contents of the repository source (see the 'paths' and 'as' fields).

Type

object

Required
  • from

Property Type Description

as

array (string)

A list of image names that this source will be used in place of during a multi-stage container image build. For instance, a Dockerfile that uses "COPY --from=nginx:latest" will first check for an image source that has "nginx:latest" in this field before attempting to pull directly. If the Dockerfile does not reference an image source it is ignored. This field and paths may both be set, in which case the contents will be used twice.

from

ObjectReference_v2

from is a reference to an ImageStreamTag, ImageStreamImage, or DockerImage to copy source from.

paths

array

paths is a list of source and destination paths to copy from the image. This content will be copied into the build context prior to starting the build. If no paths are set, the build context will not be altered.

paths[]

object

ImageSourcePath describes a path to be copied from a source image and its destination within the build directory.

pullSecret

LocalObjectReference_v2

pullSecret is a reference to a secret to be used to pull the image from a registry If the image is pulled from the OpenShift registry, this field does not need to be set.

.spec.source.images[].paths

Description

paths is a list of source and destination paths to copy from the image. This content will be copied into the build context prior to starting the build. If no paths are set, the build context will not be altered.

Type

array

.spec.source.images[].paths[]

Description

ImageSourcePath describes a path to be copied from a source image and its destination within the build directory.

Type

object

Required
  • sourcePath

  • destinationDir

Property Type Description

destinationDir

string

destinationDir is the relative directory within the build directory where files copied from the image are placed.

sourcePath

string

sourcePath is the absolute path of the file or directory inside the image to copy to the build directory. If the source path ends in /. then the content of the directory will be copied, but the directory itself will not be created at the destination.

.spec.source.secrets

Description

secrets represents a list of secrets and their destinations that will be used only for the build.

Type

array

.spec.source.secrets[]

Description

SecretBuildSource describes a secret and its destination directory that will be used only at the build time. The content of the secret referenced here will be copied into the destination directory instead of mounting.

Type

object

Required
  • secret

Property Type Description

destinationDir

string

destinationDir is the directory where the files from the secret should be available for the build time. For the Source build strategy, these will be injected into a container where the assemble script runs. Later, when the script finishes, all files injected will be truncated to zero length. For the container image build strategy, these will be copied into the build directory, where the Dockerfile is located, so users can ADD or COPY them during container image build.

secret

LocalObjectReference_v2

secret is a reference to an existing secret that you want to use in your build.

.spec.strategy

Description

BuildStrategy contains the details of how to perform a build.

Type

object

Property Type Description

customStrategy

object

CustomBuildStrategy defines input parameters specific to Custom build.

dockerStrategy

object

DockerBuildStrategy defines input parameters specific to container image build.

jenkinsPipelineStrategy

object

JenkinsPipelineBuildStrategy holds parameters specific to a Jenkins Pipeline build. Deprecated: use OpenShift Pipelines

sourceStrategy

object

SourceBuildStrategy defines input parameters specific to an Source build.

type

string

type is the kind of build strategy.

.spec.strategy.customStrategy

Description

CustomBuildStrategy defines input parameters specific to Custom build.

Type

object

Required
  • from

Property Type Description

buildAPIVersion

string

buildAPIVersion is the requested API version for the Build object serialized and passed to the custom builder

env

array (EnvVar_v2)

env contains additional environment variables you want to pass into a builder container.

exposeDockerSocket

boolean

exposeDockerSocket will allow running Docker commands (and build container images) from inside the container.

forcePull

boolean

forcePull describes if the controller should configure the build pod to always pull the images for the builder or only pull if it is not present locally

from

ObjectReference_v2

from is reference to an DockerImage, ImageStreamTag, or ImageStreamImage from which the container image should be pulled

pullSecret

LocalObjectReference_v2

pullSecret is the name of a Secret that would be used for setting up the authentication for pulling the container images from the private Docker registries

secrets

array

secrets is a list of additional secrets that will be included in the build pod

secrets[]

object

SecretSpec specifies a secret to be included in a build pod and its corresponding mount point

.spec.strategy.customStrategy.secrets

Description

secrets is a list of additional secrets that will be included in the build pod

Type

array

.spec.strategy.customStrategy.secrets[]

Description

SecretSpec specifies a secret to be included in a build pod and its corresponding mount point

Type

object

Required
  • secretSource

  • mountPath

Property Type Description

mountPath

string

mountPath is the path at which to mount the secret

secretSource

LocalObjectReference_v2

secretSource is a reference to the secret

.spec.strategy.dockerStrategy

Description

DockerBuildStrategy defines input parameters specific to container image build.

Type

object

Property Type Description

buildArgs

array (EnvVar_v2)

buildArgs contains build arguments that will be resolved in the Dockerfile. See https://docs.docker.com/engine/reference/builder/#/arg for more details. NOTE: Only the 'name' and 'value' fields are supported. Any settings on the 'valueFrom' field are ignored.

dockerfilePath

string

dockerfilePath is the path of the Dockerfile that will be used to build the container image, relative to the root of the context (contextDir). Defaults to Dockerfile if unset.

env

array (EnvVar_v2)

env contains additional environment variables you want to pass into a builder container.

forcePull

boolean

forcePull describes if the builder should pull the images from registry prior to building.

from

ObjectReference_v2

from is a reference to an DockerImage, ImageStreamTag, or ImageStreamImage which overrides the FROM image in the Dockerfile for the build. If the Dockerfile uses multi-stage builds, this will replace the image in the last FROM directive of the file.

imageOptimizationPolicy

string

imageOptimizationPolicy describes what optimizations the system can use when building images to reduce the final size or time spent building the image. The default policy is 'None' which means the final build image will be equivalent to an image created by the container image build API. The experimental policy 'SkipLayers' will avoid commiting new layers in between each image step, and will fail if the Dockerfile cannot provide compatibility with the 'None' policy. An additional experimental policy 'SkipLayersAndWarn' is the same as 'SkipLayers' but simply warns if compatibility cannot be preserved.

noCache

boolean

noCache if set to true indicates that the container image build must be executed with the --no-cache=true flag

pullSecret

LocalObjectReference_v2

pullSecret is the name of a Secret that would be used for setting up the authentication for pulling the container images from the private Docker registries

volumes

array

volumes is a list of input volumes that can be mounted into the builds runtime environment. Only a subset of Kubernetes Volume sources are supported by builds. More info: https://kubernetes.io/docs/concepts/storage/volumes

volumes[]

object

BuildVolume describes a volume that is made available to build pods, such that it can be mounted into buildah’s runtime environment. Only a subset of Kubernetes Volume sources are supported.

.spec.strategy.dockerStrategy.volumes

Description

volumes is a list of input volumes that can be mounted into the builds runtime environment. Only a subset of Kubernetes Volume sources are supported by builds. More info: https://kubernetes.io/docs/concepts/storage/volumes

Type

array

.spec.strategy.dockerStrategy.volumes[]

Description

BuildVolume describes a volume that is made available to build pods, such that it can be mounted into buildah’s runtime environment. Only a subset of Kubernetes Volume sources are supported.

Type

object

Required
  • name

  • source

  • mounts

Property Type Description

mounts

array

mounts represents the location of the volume in the image build container

mounts[]

object

BuildVolumeMount describes the mounting of a Volume within buildah’s runtime environment.

name

string

name is a unique identifier for this BuildVolume. It must conform to the Kubernetes DNS label standard and be unique within the pod. Names that collide with those added by the build controller will result in a failed build with an error message detailing which name caused the error. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

source

object

BuildVolumeSource represents the source of a volume to mount Only one of its supported types may be specified at any given time.

.spec.strategy.dockerStrategy.volumes[].mounts

Description

mounts represents the location of the volume in the image build container

Type

array

.spec.strategy.dockerStrategy.volumes[].mounts[]

Description

BuildVolumeMount describes the mounting of a Volume within buildah’s runtime environment.

Type

object

Required
  • destinationPath

Property Type Description

destinationPath

string

destinationPath is the path within the buildah runtime environment at which the volume should be mounted. The transient mount within the build image and the backing volume will both be mounted read only. Must be an absolute path, must not contain '..' or ':', and must not collide with a destination path generated by the builder process Paths that collide with those added by the build controller will result in a failed build with an error message detailing which path caused the error.

.spec.strategy.dockerStrategy.volumes[].source

Description

BuildVolumeSource represents the source of a volume to mount Only one of its supported types may be specified at any given time.

Type

object

Required
  • type

Property Type Description

configMap

ConfigMapVolumeSource

configMap represents a ConfigMap that should populate this volume

secret

SecretVolumeSource

secret represents a Secret that should populate this volume. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret

type

string

type is the BuildVolumeSourceType for the volume source. Type must match the populated volume source. Valid types are: Secret, ConfigMap

.spec.strategy.jenkinsPipelineStrategy

Description

JenkinsPipelineBuildStrategy holds parameters specific to a Jenkins Pipeline build. Deprecated: use OpenShift Pipelines

Type

object

Property Type Description

env

array (EnvVar_v2)

env contains additional environment variables you want to pass into a build pipeline.

jenkinsfile

string

Jenkinsfile defines the optional raw contents of a Jenkinsfile which defines a Jenkins pipeline build.

jenkinsfilePath

string

JenkinsfilePath is the optional path of the Jenkinsfile that will be used to configure the pipeline relative to the root of the context (contextDir). If both JenkinsfilePath & Jenkinsfile are both not specified, this defaults to Jenkinsfile in the root of the specified contextDir.

.spec.strategy.sourceStrategy

Description

SourceBuildStrategy defines input parameters specific to an Source build.

Type

object

Required
  • from

Property Type Description

env

array (EnvVar_v2)

env contains additional environment variables you want to pass into a builder container.

forcePull

boolean

forcePull describes if the builder should pull the images from registry prior to building.

from

ObjectReference_v2

from is reference to an DockerImage, ImageStreamTag, or ImageStreamImage from which the container image should be pulled

incremental

boolean

incremental flag forces the Source build to do incremental builds if true.

pullSecret

LocalObjectReference_v2

pullSecret is the name of a Secret that would be used for setting up the authentication for pulling the container images from the private Docker registries

scripts

string

scripts is the location of Source scripts

volumes

array

volumes is a list of input volumes that can be mounted into the builds runtime environment. Only a subset of Kubernetes Volume sources are supported by builds. More info: https://kubernetes.io/docs/concepts/storage/volumes

volumes[]

object

BuildVolume describes a volume that is made available to build pods, such that it can be mounted into buildah’s runtime environment. Only a subset of Kubernetes Volume sources are supported.

.spec.strategy.sourceStrategy.volumes

Description

volumes is a list of input volumes that can be mounted into the builds runtime environment. Only a subset of Kubernetes Volume sources are supported by builds. More info: https://kubernetes.io/docs/concepts/storage/volumes

Type

array

.spec.strategy.sourceStrategy.volumes[]

Description

BuildVolume describes a volume that is made available to build pods, such that it can be mounted into buildah’s runtime environment. Only a subset of Kubernetes Volume sources are supported.

Type

object

Required
  • name

  • source

  • mounts

Property Type Description

mounts

array

mounts represents the location of the volume in the image build container

mounts[]

object

BuildVolumeMount describes the mounting of a Volume within buildah’s runtime environment.

name

string

name is a unique identifier for this BuildVolume. It must conform to the Kubernetes DNS label standard and be unique within the pod. Names that collide with those added by the build controller will result in a failed build with an error message detailing which name caused the error. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

source

object

BuildVolumeSource represents the source of a volume to mount Only one of its supported types may be specified at any given time.

.spec.strategy.sourceStrategy.volumes[].mounts

Description

mounts represents the location of the volume in the image build container

Type

array

.spec.strategy.sourceStrategy.volumes[].mounts[]

Description

BuildVolumeMount describes the mounting of a Volume within buildah’s runtime environment.

Type

object

Required
  • destinationPath

Property Type Description

destinationPath

string

destinationPath is the path within the buildah runtime environment at which the volume should be mounted. The transient mount within the build image and the backing volume will both be mounted read only. Must be an absolute path, must not contain '..' or ':', and must not collide with a destination path generated by the builder process Paths that collide with those added by the build controller will result in a failed build with an error message detailing which path caused the error.

.spec.strategy.sourceStrategy.volumes[].source

Description

BuildVolumeSource represents the source of a volume to mount Only one of its supported types may be specified at any given time.

Type

object

Required
  • type

Property Type Description

configMap

ConfigMapVolumeSource

configMap represents a ConfigMap that should populate this volume

secret

SecretVolumeSource

secret represents a Secret that should populate this volume. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret

type

string

type is the BuildVolumeSourceType for the volume source. Type must match the populated volume source. Valid types are: Secret, ConfigMap

.spec.triggeredBy

Description

triggeredBy describes which triggers started the most recent update to the build configuration and contains information about those triggers.

Type

array

.spec.triggeredBy[]

Description

BuildTriggerCause holds information about a triggered build. It is used for displaying build trigger data for each build and build configuration in oc describe. It is also used to describe which triggers led to the most recent update in the build configuration.

Type

object

Property Type Description

bitbucketWebHook

object

BitbucketWebHookCause has information about a Bitbucket webhook that triggered a build.

genericWebHook

object

GenericWebHookCause holds information about a generic WebHook that triggered a build.

githubWebHook

object

GitHubWebHookCause has information about a GitHub webhook that triggered a build.

gitlabWebHook

object

GitLabWebHookCause has information about a GitLab webhook that triggered a build.

imageChangeBuild

object

ImageChangeCause contains information about the image that triggered a build

message

string

message is used to store a human readable message for why the build was triggered. E.g.: "Manually triggered by user", "Configuration change",etc.

.spec.triggeredBy[].bitbucketWebHook

Description

BitbucketWebHookCause has information about a Bitbucket webhook that triggered a build.

Type

object

Property Type Description

revision

object

SourceRevision is the revision or commit information from the source for the build

secret

string

Secret is the obfuscated webhook secret that triggered a build.

.spec.triggeredBy[].bitbucketWebHook.revision

Description

SourceRevision is the revision or commit information from the source for the build

Type

object

Required
  • type

Property Type Description

git

object

GitSourceRevision is the commit information from a git source for a build

type

string

type of the build source, may be one of 'Source', 'Dockerfile', 'Binary', or 'Images'

.spec.triggeredBy[].bitbucketWebHook.revision.git

Description

GitSourceRevision is the commit information from a git source for a build

Type

object

Property Type Description

author

object

SourceControlUser defines the identity of a user of source control

commit

string

commit is the commit hash identifying a specific commit

committer

object

SourceControlUser defines the identity of a user of source control

message

string

message is the description of a specific commit

.spec.triggeredBy[].bitbucketWebHook.revision.git.author

Description

SourceControlUser defines the identity of a user of source control

Type

object

Property Type Description

email

string

email of the source control user

name

string

name of the source control user

.spec.triggeredBy[].bitbucketWebHook.revision.git.committer

Description

SourceControlUser defines the identity of a user of source control

Type

object

Property Type Description

email

string

email of the source control user

name

string

name of the source control user

.spec.triggeredBy[].genericWebHook

Description

GenericWebHookCause holds information about a generic WebHook that triggered a build.

Type

object

Property Type Description

revision

object

SourceRevision is the revision or commit information from the source for the build

secret

string

secret is the obfuscated webhook secret that triggered a build.

.spec.triggeredBy[].genericWebHook.revision

Description

SourceRevision is the revision or commit information from the source for the build

Type

object

Required
  • type

Property Type Description

git

object

GitSourceRevision is the commit information from a git source for a build

type

string

type of the build source, may be one of 'Source', 'Dockerfile', 'Binary', or 'Images'

.spec.triggeredBy[].genericWebHook.revision.git

Description

GitSourceRevision is the commit information from a git source for a build

Type

object

Property Type Description

author

object

SourceControlUser defines the identity of a user of source control

commit

string

commit is the commit hash identifying a specific commit

committer

object

SourceControlUser defines the identity of a user of source control

message

string

message is the description of a specific commit

.spec.triggeredBy[].genericWebHook.revision.git.author

Description

SourceControlUser defines the identity of a user of source control

Type

object

Property Type Description

email

string

email of the source control user

name

string

name of the source control user

.spec.triggeredBy[].genericWebHook.revision.git.committer

Description

SourceControlUser defines the identity of a user of source control

Type

object

Property Type Description

email

string

email of the source control user

name

string

name of the source control user

.spec.triggeredBy[].githubWebHook

Description

GitHubWebHookCause has information about a GitHub webhook that triggered a build.

Type

object

Property Type Description

revision

object

SourceRevision is the revision or commit information from the source for the build

secret

string

secret is the obfuscated webhook secret that triggered a build.

.spec.triggeredBy[].githubWebHook.revision

Description

SourceRevision is the revision or commit information from the source for the build

Type

object

Required
  • type

Property Type Description

git

object

GitSourceRevision is the commit information from a git source for a build

type

string

type of the build source, may be one of 'Source', 'Dockerfile', 'Binary', or 'Images'

.spec.triggeredBy[].githubWebHook.revision.git

Description

GitSourceRevision is the commit information from a git source for a build

Type

object

Property Type Description

author

object

SourceControlUser defines the identity of a user of source control

commit

string

commit is the commit hash identifying a specific commit

committer

object

SourceControlUser defines the identity of a user of source control

message

string

message is the description of a specific commit

.spec.triggeredBy[].githubWebHook.revision.git.author

Description

SourceControlUser defines the identity of a user of source control

Type

object

Property Type Description

email

string

email of the source control user

name

string

name of the source control user

.spec.triggeredBy[].githubWebHook.revision.git.committer

Description

SourceControlUser defines the identity of a user of source control

Type

object

Property Type Description

email

string

email of the source control user

name

string

name of the source control user

.spec.triggeredBy[].gitlabWebHook

Description

GitLabWebHookCause has information about a GitLab webhook that triggered a build.

Type

object

Property Type Description

revision

object

SourceRevision is the revision or commit information from the source for the build

secret

string

Secret is the obfuscated webhook secret that triggered a build.

.spec.triggeredBy[].gitlabWebHook.revision

Description

SourceRevision is the revision or commit information from the source for the build

Type

object

Required
  • type

Property Type Description

git

object

GitSourceRevision is the commit information from a git source for a build

type

string

type of the build source, may be one of 'Source', 'Dockerfile', 'Binary', or 'Images'

.spec.triggeredBy[].gitlabWebHook.revision.git

Description

GitSourceRevision is the commit information from a git source for a build

Type

object

Property Type Description

author

object

SourceControlUser defines the identity of a user of source control

commit

string

commit is the commit hash identifying a specific commit

committer

object

SourceControlUser defines the identity of a user of source control

message

string

message is the description of a specific commit

.spec.triggeredBy[].gitlabWebHook.revision.git.author

Description

SourceControlUser defines the identity of a user of source control

Type

object

Property Type Description

email

string

email of the source control user

name

string

name of the source control user

.spec.triggeredBy[].gitlabWebHook.revision.git.committer

Description

SourceControlUser defines the identity of a user of source control

Type

object

Property Type Description

email

string

email of the source control user

name

string

name of the source control user

.spec.triggeredBy[].imageChangeBuild

Description

ImageChangeCause contains information about the image that triggered a build

Type

object

Property Type Description

fromRef

ObjectReference_v2

fromRef contains detailed information about an image that triggered a build.

imageID

string

imageID is the ID of the image that triggered a a new build.

.status

Description

BuildStatus contains the status of a build

Type

object

Required
  • phase

Property Type Description

cancelled

boolean

cancelled describes if a cancel event was triggered for the build.

completionTimestamp

Time

completionTimestamp is a timestamp representing the server time when this Build was finished, whether that build failed or succeeded. It reflects the time at which the Pod running the Build terminated. It is represented in RFC3339 form and is in UTC.

conditions

array

Conditions represents the latest available observations of a build’s current state.

conditions[]

object

BuildCondition describes the state of a build at a certain point.

config

ObjectReference_v2

config is an ObjectReference to the BuildConfig this Build is based on.

duration

integer

duration contains time.Duration object describing build time.

logSnippet

string

logSnippet is the last few lines of the build log. This value is only set for builds that failed.

message

string

message is a human-readable message indicating details about why the build has this status.

output

object

BuildStatusOutput contains the status of the built image.

outputDockerImageReference

string

outputDockerImageReference contains a reference to the container image that will be built by this build. Its value is computed from Build.Spec.Output.To, and should include the registry address, so that it can be used to push and pull the image.

phase

string

phase is the point in the build lifecycle. Possible values are "New", "Pending", "Running", "Complete", "Failed", "Error", and "Cancelled".

reason

string

reason is a brief CamelCase string that describes any failure and is meant for machine parsing and tidy display in the CLI.

stages

array

stages contains details about each stage that occurs during the build including start time, duration (in milliseconds), and the steps that occured within each stage.

stages[]

object

StageInfo contains details about a build stage.

startTimestamp

Time

startTimestamp is a timestamp representing the server time when this Build started running in a Pod. It is represented in RFC3339 form and is in UTC.

.status.conditions

Description

Conditions represents the latest available observations of a build’s current state.

Type

array

.status.conditions[]

Description

BuildCondition describes the state of a build at a certain point.

Type

object

Required
  • type

  • status

Property Type Description

lastTransitionTime

Time

The last time the condition transitioned from one status to another.

lastUpdateTime

Time

The last time this condition was updated.

message

string

A human readable message indicating details about the transition.

reason

string

The reason for the condition’s last transition.

status

string

Status of the condition, one of True, False, Unknown.

type

string

Type of build condition.

.status.output

Description

BuildStatusOutput contains the status of the built image.

Type

object

Property Type Description

to

object

BuildStatusOutputTo describes the status of the built image with regards to image registry to which it was supposed to be pushed.

.status.output.to

Description

BuildStatusOutputTo describes the status of the built image with regards to image registry to which it was supposed to be pushed.

Type

object

Property Type Description

imageDigest

string

imageDigest is the digest of the built container image. The digest uniquely identifies the image in the registry to which it was pushed.

Please note that this field may not always be set even if the push completes successfully - e.g. when the registry returns no digest or returns it in a format that the builder doesn’t understand.

.status.stages

Description

stages contains details about each stage that occurs during the build including start time, duration (in milliseconds), and the steps that occured within each stage.

Type

array

.status.stages[]

Description

StageInfo contains details about a build stage.

Type

object

Property Type Description

durationMilliseconds

integer

durationMilliseconds identifies how long the stage took to complete in milliseconds. Note: the duration of a stage can exceed the sum of the duration of the steps within the stage as not all actions are accounted for in explicit build steps.

name

string

name is a unique identifier for each build stage that occurs.

startTime

Time

startTime is a timestamp representing the server time when this Stage started. It is represented in RFC3339 form and is in UTC.

steps

array

steps contains details about each step that occurs during a build stage including start time and duration in milliseconds.

steps[]

object

StepInfo contains details about a build step.

.status.stages[].steps

Description

steps contains details about each step that occurs during a build stage including start time and duration in milliseconds.

Type

array

.status.stages[].steps[]

Description

StepInfo contains details about a build step.

Type

object

Property Type Description

durationMilliseconds

integer

durationMilliseconds identifies how long the step took to complete in milliseconds.

name

string

name is a unique identifier for each build step.

startTime

Time

startTime is a timestamp representing the server time when this Step started. it is represented in RFC3339 form and is in UTC.

API endpoints

The following API endpoints are available:

  • /apis/build.openshift.io/v1/builds

    • GET: list or watch objects of kind Build

  • /apis/build.openshift.io/v1/watch/builds

    • GET: watch individual changes to a list of Build. deprecated: use the 'watch' parameter with a list operation instead.

  • /apis/build.openshift.io/v1/namespaces/{namespace}/builds

    • DELETE: delete collection of Build

    • GET: list or watch objects of kind Build

    • POST: create a Build

  • /apis/build.openshift.io/v1/watch/namespaces/{namespace}/builds

    • GET: watch individual changes to a list of Build. deprecated: use the 'watch' parameter with a list operation instead.

  • /apis/build.openshift.io/v1/namespaces/{namespace}/builds/{name}

    • DELETE: delete a Build

    • GET: read the specified Build

    • PATCH: partially update the specified Build

    • PUT: replace the specified Build

  • /apis/build.openshift.io/v1/watch/namespaces/{namespace}/builds/{name}

    • GET: watch changes to an object of kind Build. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

  • /apis/build.openshift.io/v1/namespaces/{namespace}/builds/{name}/details

    • PUT: replace details of the specified Build

  • /apis/build.openshift.io/v1/namespaces/{namespace}/buildconfigs/{name}/webhooks

    • POST: connect POST requests to webhooks of BuildConfig

  • /apis/build.openshift.io/v1/namespaces/{namespace}/buildconfigs/{name}/webhooks/{path}

    • POST: connect POST requests to webhooks of BuildConfig

/apis/build.openshift.io/v1/builds

Table 1. Global query parameters
Parameter Type Description

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored. If the feature gate WatchBookmarks is not enabled in apiserver, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

pretty

string

If 'true', then the output is pretty printed.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

HTTP method

GET

Description

list or watch objects of kind Build

Table 2. HTTP responses
HTTP code Reponse body

200 - OK

BuildList schema

401 - Unauthorized

Empty

/apis/build.openshift.io/v1/watch/builds

Table 3. Global query parameters
Parameter Type Description

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored. If the feature gate WatchBookmarks is not enabled in apiserver, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

pretty

string

If 'true', then the output is pretty printed.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

HTTP method

GET

Description

watch individual changes to a list of Build. deprecated: use the 'watch' parameter with a list operation instead.

Table 4. HTTP responses
HTTP code Reponse body

200 - OK

WatchEvent schema

401 - Unauthorized

Empty

/apis/build.openshift.io/v1/namespaces/{namespace}/builds

Table 5. Global path parameters
Parameter Type Description

namespace

string

object name and auth scope, such as for teams and projects

Table 6. Global query parameters
Parameter Type Description

pretty

string

If 'true', then the output is pretty printed.

HTTP method

DELETE

Description

delete collection of Build

Table 7. Query parameters
Parameter Type Description

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

gracePeriodSeconds

integer

The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

orphanDependents

boolean

Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.

propagationPolicy

string

Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Table 8. Body parameters
Parameter Type Description

body

DeleteOptions schema

Table 9. HTTP responses
HTTP code Reponse body

200 - OK

Status schema

401 - Unauthorized

Empty

HTTP method

GET

Description

list or watch objects of kind Build

Table 10. Query parameters
Parameter Type Description

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored. If the feature gate WatchBookmarks is not enabled in apiserver, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Table 11. HTTP responses
HTTP code Reponse body

200 - OK

BuildList schema

401 - Unauthorized

Empty

HTTP method

POST

Description

create a Build

Table 12. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

Table 13. Body parameters
Parameter Type Description

body

Build schema

Table 14. HTTP responses
HTTP code Reponse body

200 - OK

Build schema

201 - Created

Build schema

202 - Accepted

Build schema

401 - Unauthorized

Empty

/apis/build.openshift.io/v1/watch/namespaces/{namespace}/builds

Table 15. Global path parameters
Parameter Type Description

namespace

string

object name and auth scope, such as for teams and projects

Table 16. Global query parameters
Parameter Type Description

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored. If the feature gate WatchBookmarks is not enabled in apiserver, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

pretty

string

If 'true', then the output is pretty printed.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

HTTP method

GET

Description

watch individual changes to a list of Build. deprecated: use the 'watch' parameter with a list operation instead.

Table 17. HTTP responses
HTTP code Reponse body

200 - OK

WatchEvent schema

401 - Unauthorized

Empty

/apis/build.openshift.io/v1/namespaces/{namespace}/builds/{name}

Table 18. Global path parameters
Parameter Type Description

name

string

name of the Build

namespace

string

object name and auth scope, such as for teams and projects

Table 19. Global query parameters
Parameter Type Description

pretty

string

If 'true', then the output is pretty printed.

HTTP method

DELETE

Description

delete a Build

Table 20. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

gracePeriodSeconds

integer

The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.

orphanDependents

boolean

Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.

propagationPolicy

string

Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Table 21. Body parameters
Parameter Type Description

body

DeleteOptions schema

Table 22. HTTP responses
HTTP code Reponse body

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

HTTP method

GET

Description

read the specified Build

Table 23. HTTP responses
HTTP code Reponse body

200 - OK

Build schema

401 - Unauthorized

Empty

HTTP method

PATCH

Description

partially update the specified Build

Table 24. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).

force

boolean

Force is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Table 25. Body parameters
Parameter Type Description

body

Patch schema

Table 26. HTTP responses
HTTP code Reponse body

200 - OK

Build schema

401 - Unauthorized

Empty

HTTP method

PUT

Description

replace the specified Build

Table 27. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

Table 28. Body parameters
Parameter Type Description

body

Build schema

Table 29. HTTP responses
HTTP code Reponse body

200 - OK

Build schema

201 - Created

Build schema

401 - Unauthorized

Empty

/apis/build.openshift.io/v1/watch/namespaces/{namespace}/builds/{name}

Table 30. Global path parameters
Parameter Type Description

name

string

name of the Build

namespace

string

object name and auth scope, such as for teams and projects

Table 31. Global query parameters
Parameter Type Description

allowWatchBookmarks

boolean

allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored. If the feature gate WatchBookmarks is not enabled in apiserver, this field is ignored.

continue

string

The continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key".

This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.

fieldSelector

string

A selector to restrict the list of returned objects by their fields. Defaults to everything.

labelSelector

string

A selector to restrict the list of returned objects by their labels. Defaults to everything.

limit

integer

limit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true.

The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.

pretty

string

If 'true', then the output is pretty printed.

resourceVersion

string

resourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

resourceVersionMatch

string

resourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details.

Defaults to unset

timeoutSeconds

integer

Timeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

watch

boolean

Watch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

HTTP method

GET

Description

watch changes to an object of kind Build. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

Table 32. HTTP responses
HTTP code Reponse body

200 - OK

WatchEvent schema

401 - Unauthorized

Empty

/apis/build.openshift.io/v1/namespaces/{namespace}/builds/{name}/details

Table 33. Global path parameters
Parameter Type Description

name

string

name of the Build

namespace

string

object name and auth scope, such as for teams and projects

Table 34. Global query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldManager

string

fieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.

pretty

string

If 'true', then the output is pretty printed.

HTTP method

PUT

Description

replace details of the specified Build

Table 35. Body parameters
Parameter Type Description

body

Build schema

Table 36. HTTP responses
HTTP code Reponse body

200 - OK

Build schema

201 - Created

Build schema

401 - Unauthorized

Empty

/apis/build.openshift.io/v1/namespaces/{namespace}/buildconfigs/{name}/webhooks

Table 37. Global path parameters
Parameter Type Description

name

string

name of the Build

namespace

string

object name and auth scope, such as for teams and projects

Table 38. Global query parameters
Parameter Type Description

path

string

Path is the URL path to use for the current proxy request to pod.

HTTP method

POST

Description

connect POST requests to webhooks of BuildConfig

Table 39. HTTP responses
HTTP code Reponse body

200 - OK

string

401 - Unauthorized

Empty

/apis/build.openshift.io/v1/namespaces/{namespace}/buildconfigs/{name}/webhooks/{path}

Table 40. Global path parameters
Parameter Type Description

name

string

name of the Build

namespace

string

object name and auth scope, such as for teams and projects

path

string

path to the resource

Table 41. Global query parameters
Parameter Type Description

path

string

Path is the URL path to use for the current proxy request to pod.

HTTP method

POST

Description

connect POST requests to webhooks of BuildConfig

Table 42. HTTP responses
HTTP code Reponse body

200 - OK

string

401 - Unauthorized

Empty