You reviewed details about the OKD installation and update processes.
You read the documentation on selecting a cluster installation method and preparing it for users.
If you use a firewall and plan to use Telemetry, you configured the firewall to allow the sites required by your cluster.
You can install OKD on VMC by using installer-provisioned or user-provisioned infrastructure. The default installation type uses installer-provisioned infrastructure, where the installation program provisions the underlying infrastructure for the cluster. You can also install OKD on infrastructure that you provide. If you do not use infrastructure that the installation program provisions, you must manage and maintain the cluster resources yourself.
See the Installation process for more information about installer-provisioned and user-provisioned installation processes.
The steps for performing a user-provisioned infrastructure installation are provided as an example only. Installing a cluster with infrastructure you provide requires knowledge of the VMC platform and the installation process of OKD. Use the user-provisioned infrastructure installation instructions as a guide; you are free to create the required resources through other methods. |
Installer-provisioned infrastructure allows the installation program to pre-configure and automate the provisioning of resources required by OKD.
Installing a cluster on VMC: You can install OKD on VMC by using installer-provisioned infrastructure installation with no customization.
Installing a cluster on VMC with customizations: You can install OKD on VMC by using installer-provisioned infrastructure installation with the default customization options.
Installing a cluster on VMC with network customizations: You can install OKD on installer-provisioned VMC infrastructure, with network customizations. You can customize your OKD network configuration during installation, so that your cluster can coexist with your existing IP address allocations and adhere to your network requirements.
Installing a cluster on VMC in a restricted network: You can install a cluster on VMC infrastructure in a restricted network by creating an internal mirror of the installation release content. You can use this method to deploy OKD on an internal network that is not visible to the internet.
User-provisioned infrastructure requires the user to provision all resources required by OKD.
Installing a cluster on VMC with user-provisioned infrastructure: You can install OKD on VMC infrastructure that you provision.
Installing a cluster on VMC with user-provisioned infrastructure and network customizations: You can install OKD on VMC infrastructure that you provision with customized network configuration options.
Installing a cluster on VMC in a restricted network with user-provisioned infrastructure: OKD can be installed on VMC infrastructure that you provision in a restricted network.
You must install an OKD cluster on one of the following versions of a VMware vSphere instance that meets the requirements for the components that you use:
Version 7.0 Update 2 or later
Version 8.0 Update 1 or later
You can host the VMware vSphere infrastructure on-premise or on a VMware Cloud Verified provider that meets the requirements outlined in the following table:
Virtual environment product | Required version |
---|---|
VMware virtual hardware |
15 or later |
vSphere ESXi hosts |
7.0 Update 2 or later; 8.0 Update 1 or later |
vCenter host |
7.0 Update 2 or later; 8.0 Update 1 or later |
Installing a cluster on VMware vSphere versions 7.0 and 7.0 Update 1 is deprecated. These versions are still fully supported, but all vSphere 6.x versions are no longer supported. Version 4.12 of OKD requires VMware virtual hardware version 15 or later. To update the hardware version for your vSphere virtual machines, see the "Updating hardware on nodes running in vSphere" article in the Updating clusters section. |
Component | Minimum supported versions | Description |
---|---|---|
Hypervisor |
vSphere 7.0 Update 2 (or later) or vSphere 8.0 Update 1 (or later) with virtual hardware version 15 |
This version is the minimum version that Fedora CoreOS (FCOS) supports. For more information about supported hardware on the latest version of Fedora that is compatible with FCOS, see Hardware on the Red Hat Customer Portal. |
Storage with in-tree drivers |
vSphere 7.0 Update 2 or later; 8.0 Update 1 or later |
This plugin creates vSphere storage by using the in-tree storage drivers for vSphere included in OKD. |
You must ensure that the time on your ESXi hosts is synchronized before you install OKD. See Edit Time Configuration for a Host in the VMware documentation. |
To install the vSphere CSI Driver Operator, the following requirements must be met:
VMware vSphere version: 7.0 Update 2 or later; 8.0 Update 1 or later
vCenter version: 7.0 Update 2 or later; 8.0 Update 1 or later
Virtual machines of hardware version 15 or later
No third-party vSphere CSI driver already installed in the cluster
If a third-party vSphere CSI driver is present in the cluster, OKD does not overwrite it. The presence of a third-party vSphere CSI driver prevents OKD from updating to OKD 4.13 or later.
The VMware vSphere CSI Driver Operator is supported only on clusters deployed with |
To remove a third-party CSI driver, see Removing a third-party vSphere CSI Driver.
Uninstalling a cluster on VMC that uses installer-provisioned infrastructure: You can remove a cluster that you deployed on VMC infrastructure that used installer-provisioned infrastructure.