×

You can switch the Bluefield-2 network device from data processing unit (DPU) mode to network interface controller (NIC) mode.

Switching Bluefield-2 from DPU mode to NIC mode

Use the following procedure to switch Bluefield-2 from data processing units (DPU) mode to network interface controller (NIC) mode.

Currently, only switching Bluefield-2 from DPU to NIC mode is supported. Switching from NIC mode to DPU mode is unsupported.

Prerequisites
  • You have installed the SR-IOV Network Operator. For more information, see "Installing SR-IOV Network Operator".

  • You have updated Bluefield-2 to the latest firmware. For more information, see Firmware for NVIDIA BlueField-2.

Procedure
  1. Add the following labels to each of your worker nodes by entering the following commands:

    $ oc label node <example_node_name_one> node-role.kubernetes.io/sriov=
    $ oc label node <example_node_name_two> node-role.kubernetes.io/sriov=
  2. Create a machine config pool for the SR-IOV Network Operator, for example:

    apiVersion: machineconfiguration.openshift.io/v1
    kind: MachineConfigPool
    metadata:
      name: sriov
    spec:
      machineConfigSelector:
        matchExpressions:
        - {key: machineconfiguration.openshift.io/role, operator: In, values: [worker,sriov]}
      nodeSelector:
        matchLabels:
          node-role.kubernetes.io/sriov: ""
  3. Apply the following machineconfig.yaml file to the worker nodes:

    apiVersion: machineconfiguration.openshift.io/v1
    kind: MachineConfig
    metadata:
      labels:
        machineconfiguration.openshift.io/role: sriov
      name: 99-bf2-dpu
    spec:
      config:
        ignition:
          version: 3.2.0
        storage:
          files:
          - contents:
              source: data:text/plain;charset=utf-8;base64,ZmluZF9jb250YWluZXIoKSB7CiAgY3JpY3RsIHBzIC1vIGpzb24gfCBqcSAtciAnLmNvbnRhaW5lcnNbXSB8IHNlbGVjdCgubWV0YWRhdGEubmFtZT09InNyaW92LW5ldHdvcmstY29uZmlnLWRhZW1vbiIpIHwgLmlkJwp9CnVudGlsIG91dHB1dD0kKGZpbmRfY29udGFpbmVyKTsgW1sgLW4gIiRvdXRwdXQiIF1dOyBkbwogIGVjaG8gIndhaXRpbmcgZm9yIGNvbnRhaW5lciB0byBjb21lIHVwIgogIHNsZWVwIDE7CmRvbmUKISBzdWRvIGNyaWN0bCBleGVjICRvdXRwdXQgL2JpbmRhdGEvc2NyaXB0cy9iZjItc3dpdGNoLW1vZGUuc2ggIiRAIgo=
            mode: 0755
            overwrite: true
            path: /etc/default/switch_in_sriov_config_daemon.sh
        systemd:
          units:
          - name: dpu-switch.service
            enabled: true
            contents: |
              [Unit]
              Description=Switch BlueField2 card to NIC/DPU mode
              RequiresMountsFor=%t/containers
              Wants=network.target
              After=network-online.target kubelet.service
              [Service]
              SuccessExitStatus=0 120
              RemainAfterExit=True
              ExecStart=/bin/bash -c '/etc/default/switch_in_sriov_config_daemon.sh nic || shutdown -r now' (1)
              Type=oneshot
              [Install]
              WantedBy=multi-user.target
    1 Optional: The PCI address of a specific card can optionally be specified, for example ExecStart=/bin/bash -c '/etc/default/switch_in_sriov_config_daemon.sh nic 0000:5e:00.0 || echo done'. By default, the first device is selected. If there is more than one device, you must specify which PCI address to be used. The PCI address must be the same on all nodes that are switching Bluefield-2 from DPU mode to NIC mode.
  4. Wait for the worker nodes to restart. After restarting, the Bluefield-2 network device on the worker nodes is switched into NIC mode.

  5. Optional: You might need to restart the host hardware because most recent Bluefield-2 firmware releases require a hardware restart to switch into NIC mode.

Additional resources

Installing SR-IOV Network Operator