Configuring OADP with multiple backup storage locations - OADP Application backup and restore | Backup and restore

Configuring the DPA with more than one BSL
Configuring two backup BSLs with different cloud credentials

Configure multiple backup storage locations (BSLs) in the Data Protection Application (DPA) to store backups across different regions or storage providers. This provides flexibility and redundancy for your backup strategy.

OADP supports multiple credentials for configuring more than one BSL, so that you can specify the credentials to use with any BSL.

Configuring the DPA with more than one BSL

Configure the DataProtectionApplication (DPA) custom resource (CR) with multiple BackupStorageLocation (BSL) resources to store backups across different locations using provider-specific credentials. This provides backup distribution and location-specific restore capabilities.

For example, you have configured the following two BSLs:

Configured one BSL in the DPA and set it as the default BSL.
Created another BSL independently by using the BackupStorageLocation CR.

As you have already set the BSL created through the DPA as the default, you cannot set the independently created BSL again as the default. This means, at any given time, you can set only one BSL as the default BSL.

Prerequisites

You must install the OADP Operator.
You must create the secrets by using the credentials provided by the cloud provider.

Procedure

Configure the DataProtectionApplication CR with more than one BackupStorageLocation CR. See the following example:

Example DPA

apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
#...
backupLocations:
  - name: aws
    velero:
      provider: aws
      default: true
      objectStorage:
        bucket: <bucket_name>
        prefix: <prefix>
      config:
        region: <region_name>
        profile: "default"
      credential:
        key: cloud
        name: cloud-credentials
  - name: odf
    velero:
      provider: aws
      default: false
      objectStorage:
        bucket: <bucket_name>
        prefix: <prefix>
      config:
        profile: "default"
        region: <region_name>
        s3Url: <url>
        insecureSkipTLSVerify: "true"
        s3ForcePathStyle: "true"
      credential:
        key: cloud
        name: <custom_secret_name_odf>
#...

where:

name: aws: Specifies a name for the first BSL.
default: true: Indicates that this BSL is the default BSL. If a BSL is not set in the Backup CR, the default BSL is used. You can set only one BSL as the default.
<bucket_name>: Specifies the bucket name.
<prefix>: Specifies a prefix for Velero backups. For example, velero.
<region_name>: Specifies the AWS region for the bucket.
cloud-credentials: Specifies the name of the default Secret object that you created.
name: odf: Specifies a name for the second BSL.
<url>: Specifies the URL of the S3 endpoint.
<custom_secret_name_odf>: Specifies the correct name for the Secret. For example, custom_secret_name_odf. If you do not specify a Secret name, the default name is used.

Specify the BSL to be used in the backup CR. See the following example.
Example backup CR
```
apiVersion: velero.io/v1
kind: Backup
# ...
spec:
  includedNamespaces:
  - <namespace>
  storageLocation: <backup_storage_location>
  defaultVolumesToFsBackup: true
```
where:

<namespace>

Specifies the namespace to back up.

<backup_storage_location>

Specifies the storage location.

Configuring two backup BSLs with different cloud credentials

Configure two backup storage locations with different cloud credentials to back up applications to multiple storage targets. With this setup, you can distribute backups across different storage providers for redundancy.

Prerequisites

You must install the OADP Operator.
You must configure two backup storage locations: AWS S3 and Multicloud Object Gateway (MCG).
You must have an application with a database deployed on a Red Hat OpenShift cluster.

Procedure

Create the first Secret for the AWS S3 storage provider with the default name by running the following command:
```
$ oc create secret generic cloud-credentials -n openshift-adp --from-file cloud=<aws_credentials_file_name>
```
where:

<aws_credentials_file_name>

Specifies the name of the cloud credentials file for AWS S3.
Create the second Secret for MCG with a custom name by running the following command:
```
$ oc create secret generic mcg-secret -n openshift-adp --from-file cloud=<MCG_credentials_file_name>
```
where:

<MCG_credentials_file_name>

Specifies the name of the cloud credentials file for MCG. Note the name of the mcg-secret custom secret.

Configure the DPA with the two BSLs as shown in the following example.

Example DPA

apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
metadata:
  name: two-bsl-dpa
  namespace: openshift-adp
spec:
  backupLocations:
  - name: aws
    velero:
      config:
        profile: default
        region: <region_name>
      credential:
        key: cloud
        name: cloud-credentials
      default: true
      objectStorage:
        bucket: <bucket_name>
        prefix: velero
      provider: aws
  - name: mcg
    velero:
      config:
        insecureSkipTLSVerify: "true"
        profile: noobaa
        region: <region_name>
        s3ForcePathStyle: "true"
        s3Url: <s3_url>
      credential:
        key: cloud
        name: mcg-secret
      objectStorage:
        bucket: <bucket_name_mcg>
        prefix: velero
      provider: aws
  configuration:
    nodeAgent:
      enable: true
      uploaderType: kopia
    velero:
      defaultPlugins:
      - openshift
      - aws

where:

<region_name>: Specifies the AWS region for the bucket.
<bucket_name>: Specifies the AWS S3 bucket name.
region: <region_name>: Specifies the region, following the naming convention of the documentation of MCG.
<s3_url>: Specifies the URL of the S3 endpoint for MCG.
mcg-secret: Specifies the name of the custom secret for MCG storage.
<bucket_name_mcg>: Specifies the MCG bucket name.

Create the DPA by running the following command:
```
$ oc create -f <dpa_file_name>
```
where:

<dpa_file_name>

Specifies the file name of the DPA you configured.
Verify that the DPA has reconciled by running the following command:
```
$ oc get dpa -o yaml
```

Verify that the BSLs are available by running the following command:

$ oc get bsl

Example output

NAME   PHASE       LAST VALIDATED   AGE     DEFAULT
aws    Available   5s               3m28s   true
mcg    Available   5s               3m28s

Create a backup CR with the default BSL.

In the following example, the storageLocation field is not specified in the backup CR.
Example backup CR
```
apiVersion: velero.io/v1
kind: Backup
metadata:
  name: test-backup1
  namespace: openshift-adp
spec:
  includedNamespaces:
  - <mysql_namespace>
  defaultVolumesToFsBackup: true
```
where:

<mysql_namespace>

Specifies the namespace for the application installed in the cluster.
Create a backup by running the following command:
```
$ oc apply -f <backup_file_name>
```
where:

<backup_file_name>

Specifies the name of the backup CR file.
Verify that the backup completed with the default BSL by running the following command:
```
$ oc get backups.velero.io <backup_name> -o yaml
```
where:

<backup_name>

Specifies the name of the backup.
Create a backup CR by using MCG as the BSL. In the following example, note that the second storageLocation value is specified at the time of backup CR creation.
Example backup CR
```
apiVersion: velero.io/v1
kind: Backup
metadata:
  name: test-backup1
  namespace: openshift-adp
spec:
  includedNamespaces:
  - <mysql_namespace>
  storageLocation: mcg
  defaultVolumesToFsBackup: true
```
where:

<mysql_namespace>

Specifies the namespace for the application installed in the cluster.

mcg

Specifies the second storage location.
Create a second backup by running the following command:
```
$ oc apply -f <backup_file_name>
```
where:

<backup_file_name>

Specifies the name of the backup CR file.
Verify that the backup completed with the storage location as MCG by running the following command:
```
$ oc get backups.velero.io <backup_name> -o yaml
```
where:

<backup_name>

Specifies the name of the backup.

Additional resources

Creating profiles for different credentials

Configuring the OpenShift API for Data Protection (OADP) with more than one Backup Storage Location

Configuring the DPA with more than one BSL

Configuring two backup BSLs with different cloud credentials