Including a self-signed CA certificate during backup - OADP Application backup and restore | Backup and restore

Backing up an application and its self-signed CA certificate

You can include a self-signed Certificate Authority (CA) certificate in the Data Protection Application (DPA) and then back up an application. You store the backup in a NooBaa bucket provided by Red Hat OpenShift Data Foundation (ODF).

Backing up an application and its self-signed CA certificate

The s3.openshift-storage.svc service, provided by ODF, uses a Transport Layer Security protocol (TLS) certificate that is signed with the self-signed service CA.

To prevent a certificate signed by unknown authority error, you must include a self-signed CA certificate in the backup storage location (BSL) section of DataProtectionApplication custom resource (CR). For this situation, you must complete the following tasks:

Request a NooBaa bucket by creating an object bucket claim (OBC).
Extract the bucket details.
Include a self-signed CA certificate in the DataProtectionApplication CR.
Back up an application.

Prerequisites

You installed the OADP Operator.
You installed the ODF Operator.
You have an application with a database running in a separate namespace.

Procedure

Create an OBC manifest to request a NooBaa bucket as shown in the following example:

Example ObjectBucketClaim CR

apiVersion: objectbucket.io/v1alpha1
kind: ObjectBucketClaim
metadata:
  name: test-obc (1)
  namespace: openshift-adp
spec:
  storageClassName: openshift-storage.noobaa.io
  generateBucketName: test-backup-bucket (2)

1	Specifies the name of the object bucket claim.
2	Specifies the name of the bucket.

Create the OBC by running the following command:
```
$ oc create -f <obc_file_name>
```
When you create an OBC, ODF creates a secret and a ConfigMap with the same name as the object bucket claim. The secret object contains the bucket credentials, and the ConfigMap object contains information to access the bucket. To get the bucket name and bucket host from the generated config map, run the following command:
```
$ oc extract --to=- cm/test-obc (1)
```
1 The name of the OBC is test-obc.
Example output
```
# BUCKET_NAME
backup-c20...41fd
# BUCKET_PORT
443
# BUCKET_REGION

# BUCKET_SUBREGION

# BUCKET_HOST
s3.openshift-storage.svc
```

To get the bucket credentials from the secret object , run the following command:

$ oc extract --to=- secret/test-obc

Example output

# AWS_ACCESS_KEY_ID
ebYR....xLNMc
# AWS_SECRET_ACCESS_KEY
YXf...+NaCkdyC3QPym

Create a cloud-credentials file with the object bucket credentials by using the following example configuration:
```
[default]
aws_access_key_id=<AWS_ACCESS_KEY_ID>
aws_secret_access_key=<AWS_SECRET_ACCESS_KEY>
```

Create the cloud-credentials secret with the cloud-credentials file content by running the following command:

$ oc create secret generic \
  cloud-credentials \
  -n openshift-adp \
  --from-file cloud=cloud-credentials

Extract the service CA certificate from the openshift-service-ca.crt config map by running the following command. Ensure that you encode the certificate in Base64 format and note the value to use in the next step.
```
$ oc get cm/openshift-service-ca.crt \
  -o jsonpath='{.data.service-ca\.crt}' | base64 -w0; echo
```
Example output
```
LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0...
....gpwOHMwaG9CRmk5a3....FLS0tLS0K
```

Configure the DataProtectionApplication CR manifest file with the bucket name and CA certificate as shown in the following example:

Example DataProtectionApplication CR

apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
metadata:
  name: oadp-backup
  namespace: openshift-adp
spec:
  configuration:
    nodeAgent:
      enable: true
      uploaderType: kopia
    velero:
      defaultPlugins:
        - aws
        - openshift
        - csi
      defaultSnapshotMoveData: true
  backupLocations:
    - velero:
        config:
          profile: "default"
          region: noobaa
          s3Url: https://s3.openshift-storage.svc
          s3ForcePathStyle: "true"
          insecureSkipTLSVerify: "false" (1)
        provider: aws
        default: true
        credential:
          key: cloud
          name:  cloud-credentials
        objectStorage:
          bucket: <bucket_name> (2)
          prefix: oadp
          caCert: <ca_cert> (3)

1	The `insecureSkipTLSVerify` flag can be set to either `true` or `false`. If set to "true", SSL/TLS security is disabled. If set to `false`, SSL/TLS security is enabled.
2	Specify the name of the bucket extracted in an earlier step.
3	Copy and paste the `Base64` encoded certificate from the previous step.

Create the DataProtectionApplication CR by running the following command:
```
$ oc apply -f <dpa_filename>
```

Verify that the DataProtectionApplication CR is created successfully by running the following command:

$ oc get dpa -o yaml

Example output

apiVersion: v1
items:
- apiVersion: oadp.openshift.io/v1alpha1
  kind: DataProtectionApplication
  metadata:
    namespace: openshift-adp
    #...#
  spec:
    backupLocations:
    - velero:
        config:
          #...#
  status:
    conditions:
    - lastTransitionTime: "20....9:54:02Z"
      message: Reconcile complete
      reason: Complete
      status: "True"
      type: Reconciled
kind: List
metadata:
  resourceVersion: ""

Verify that the backup storage location (BSL) is available by running the following command:

$ oc get backupstoragelocations.velero.io -n openshift-adp

Example output

NAME           PHASE       LAST VALIDATED   AGE   DEFAULT
dpa-sample-1   Available   3s               15s   true

Configure the Backup CR by using the following example:

Example Backup CR

apiVersion: velero.io/v1
kind: Backup
metadata:
  name: test-backup
  namespace: openshift-adp
spec:
  includedNamespaces:
  - <application_namespace> (1)

1	Specify the namespace for the application to back up.

Create the Backup CR by running the following command:
```
$ oc apply -f <backup_cr_filename>
```

Verification

Verify that the Backup object is in the Completed phase by running the following command:

$ oc describe backup test-backup -n openshift-adp

Example output

Name:         test-backup
Namespace:    openshift-adp
# ....#
Status:
  Backup Item Operations Attempted:  1
  Backup Item Operations Completed:  1
  Completion Timestamp:              2024-09-25T10:17:01Z
  Expiration:                        2024-10-25T10:16:31Z
  Format Version:                    1.1.0
  Hook Status:
  Phase:  Completed
  Progress:
    Items Backed Up:  34
    Total Items:      34
  Start Timestamp:    2024-09-25T10:16:31Z
  Version:            1
Events:               <none>