1. Documentation
×

VMware vSphere CSI Driver Operator

Overview

OKD can provision persistent volumes (PVs) using the Container Storage Interface (CSI) VMware vSphere driver for Virtual Machine Disk (VMDK) volumes.

Familiarity with persistent storage and configuring CSI volumes is recommended when working with a CSI Operator and driver.

To create CSI-provisioned persistent volumes (PVs) that mount to vSphere storage assets, OKD installs the vSphere CSI Driver Operator and the vSphere CSI driver by default in the openshift-cluster-csi-drivers namespace.

  • vSphere CSI Driver Operator: The Operator provides a storage class, called thin-csi, that you can use to create persistent volumes claims (PVCs). The vSphere CSI Driver Operator supports dynamic volume provisioning by allowing storage volumes to be created on-demand, eliminating the need for cluster administrators to pre-provision storage. You can disable this default storage class if desired (see Managing the default storage class).

  • vSphere CSI driver: The driver enables you to create and mount vSphere PVs. In OKD 4.17, the driver version is 3.2.0 The vSphere CSI driver supports all of the file systems supported by the underlying Red Hat Core operating system release, including XFS and Ext4. For more information about supported file systems, see Overview of available file systems.

For new installations, OKD 4.13 and later provides automatic migration for the vSphere in-tree volume plugin to its equivalent CSI driver. Updating to OKD 4.15 and later also provides automatic migration. For more information about updating and migration, see CSI automatic migration.

CSI automatic migration should be seamless. Migration does not change how you use all existing API objects, such as persistent volumes, persistent volume claims, and storage classes.

About CSI

Storage vendors have traditionally provided storage drivers as part of Kubernetes. With the implementation of the Container Storage Interface (CSI), third-party providers can instead deliver storage plugins using a standard interface without ever having to change the core Kubernetes code.

CSI Operators give OKD users storage options, such as volume snapshots, that are not possible with in-tree volume plugins.

vSphere CSI limitations

The following limitations apply to the vSphere Container Storage Interface (CSI) Driver Operator:

  • The vSphere CSI Driver supports dynamic and static provisioning. However, when using static provisioning in the PV specifications, do not use the key storage.kubernetes.io/csiProvisionerIdentity in csi.volumeAttributes because this key indicates dynamically provisioned PVs.

  • Migrating persistent container volumes between datastores using the vSphere client interface is not supported with OKD.

vSphere storage policy

The vSphere CSI Driver Operator storage class uses vSphere’s storage policy. OKD automatically creates a storage policy that targets datastore configured in cloud configuration:

kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
  name: thin-csi
provisioner: csi.vsphere.vmware.com
parameters:
  StoragePolicyName: "$openshift-storage-policy-xxxx"
volumeBindingMode: WaitForFirstConsumer
allowVolumeExpansion: false
reclaimPolicy: Delete

ReadWriteMany vSphere volume support

If the underlying vSphere environment supports the vSAN file service, then vSphere Container Storage Interface (CSI) Driver Operator installed by OKD supports provisioning of ReadWriteMany (RWX) volumes. If vSAN file service is not configured, then ReadWriteOnce (RWO) is the only access mode available. If you do not have vSAN file service configured, and you request RWX, the volume fails to get created and an error is logged.

For more information about configuring the vSAN file service in your environment, see vSAN File Service.

You can request RWX volumes by making the following persistent volume claim (PVC):

kind: PersistentVolumeClaim
apiVersion: v1
metadata:
  name: myclaim
spec:
  resources:
    requests:
      storage: 1Gi
  accessModes:
     - ReadWriteMany
  storageClassName: thin-csi

Requesting a PVC of the RWX volume type should result in provisioning of persistent volumes (PVs) backed by the vSAN file service.

VMware vSphere CSI Driver Operator requirements

To install the vSphere Container Storage Interface (CSI) Driver Operator, the following requirements must be met:

  • VMware vSphere version: 7.0 Update 2 or later, or VMware Cloud Foundation 4.3 or later; 8.0 Update 1 or later, or VMware Cloud Foundation 5.0 or later

  • vCenter version: 7.0 Update 2 or later, or VMware Cloud Foundation 4.3 or later; 8.0 Update 1 or later, or VMware Cloud Foundation 5.0 or later

  • Virtual machines of hardware version 15 or later

  • No third-party vSphere CSI driver already installed in the cluster

If a third-party vSphere CSI driver is present in the cluster, OKD does not overwrite it. The presence of a third-party vSphere CSI driver prevents OKD from updating to OKD 4.13 or later.

The VMware vSphere CSI Driver Operator is supported only on clusters deployed with platform: vsphere in the installation manifest.

You can create a custom role for the Container Storage Interface (CSI) driver, the vSphere CSI Driver Operator, and the vSphere Problem Detector Operator. The custom role can include privilege sets that assign a minimum set of permissions to each vSphere object. This means that the CSI driver, the vSphere CSI Driver Operator, and the vSphere Problem Detector Operator can establish a basic interaction with these objects.

Installing an OKD cluster in a vCenter is tested against a full list of privileges as described in the "Required vCenter account privileges" section. By adhering to the full list of privileges, you can reduce the possibility of unexpected and unsupported behaviors that might occur when creating a custom role with a set of restricted privileges.

To remove a third-party CSI driver, see Removing a third-party vSphere CSI Driver.

Removing a third-party vSphere CSI Driver Operator

OKD 4.10, and later, includes a built-in version of the vSphere Container Storage Interface (CSI) Operator Driver that is supported by Red Hat. If you have installed a vSphere CSI driver provided by the community or another vendor, updates to the next major version of OKD, such as 4.13, or later, might be disabled for your cluster.

OKD 4.12, and later, clusters are still fully supported, and updates to z-stream releases of 4.12, such as 4.12.z, are not blocked, but you must correct this state by removing the third-party vSphere CSI Driver before updates to next major version of OKD can occur. Removing the third-party vSphere CSI driver does not require deletion of associated persistent volume (PV) objects, and no data loss should occur.

These instructions may not be complete, so consult the vendor or community provider uninstall guide to ensure removal of the driver and components.

To uninstall the third-party vSphere CSI Driver:

  1. Delete the third-party vSphere CSI Driver (VMware vSphere Container Storage Plugin) Deployment and Daemonset objects.

  2. Delete the configmap and secret objects that were installed previously with the third-party vSphere CSI Driver.

  3. Delete the third-party vSphere CSI driver CSIDriver object:

    ~ $ oc delete CSIDriver csi.vsphere.vmware.com
    csidriver.storage.k8s.io "csi.vsphere.vmware.com" deleted

After you have removed the third-party vSphere CSI Driver from the OKD cluster, installation of Red Hat’s vSphere CSI Driver Operator automatically resumes, and any conditions that could block upgrades to OKD 4.11, or later, are automatically removed. If you had existing vSphere CSI PV objects, their lifecycle is now managed by Red Hat’s vSphere CSI Driver Operator.

vSphere persistent disks encryption

You can encrypt virtual machines (VMs) and dynamically provisioned persistent volumes (PVs) on OKD running on top of vSphere.

OKD does not support RWX-encrypted PVs. You cannot request RWX PVs out of a storage class that uses an encrypted storage policy.

You must encrypt VMs before you can encrypt PVs, which you can do during or after installation.

For information about encrypting VMs, see:

After encrypting VMs, you can configure a storage class that supports dynamic encryption volume provisioning using the vSphere Container Storage Interface (CSI) driver. This can be accomplished in one of two ways using:

  • Datastore URL: This approach is not very flexible, and forces you to use a single datastore. It also does not support topology-aware provisioning.

  • Tag-based placement: Encrypts the provisioned volumes and uses tag-based placement to target specific datastores.

Using datastore URL

Procedure

To encrypt using the datastore URL:

  1. Find out the name of the default storage policy in your datastore that supports encryption.

    This is same policy that was used for encrypting your VMs.

  2. Create a storage class that uses this storage policy:

    kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
 name: encryption
provisioner: csi.vsphere.vmware.com
parameters:
 storagePolicyName: <storage-policy-name> (1)
 datastoreurl: "ds:///vmfs/volumes/vsan:522e875627d-b090c96b526bb79c/"
    1 Name of default storage policy in your datastore that supports encryption

Using tag-based placement

Procedure

To encrypt using tag-based placement:

  1. In vCenter create a category for tagging datastores that will be made available to this storage class. Also, ensure that StoragePod(Datastore clusters), Datastore, and Folder are selected as Associable Entities for the created category.

  2. In vCenter, create a tag that uses the category created earlier.

  3. Assign the previously created tag to each datastore that will be made available to the storage class. Make sure that datastores are shared with hosts participating in the OKD cluster.

  4. In vCenter, from the main menu, click Policies and Profiles.

  5. On the Policies and Profiles page, in the navigation pane, click VM Storage Policies.

  6. Click CREATE.

  7. Type a name for the storage policy.

  8. Select Enable host based rules and Enable tag based placement rules.

  9. In the Next tab:

    1. Select Encryption and Default Encryption Properties.

    2. Select the tag category created earlier, and select tag selected. Verify that the policy is selecting matching datastores.

  10. Create the storage policy.

  11. Create a storage class that uses the storage policy:

    kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
 name:  csi-encrypted
provisioner: csi.vsphere.vmware.com
reclaimPolicy: Delete
volumeBindingMode: WaitForFirstConsumer
parameters:
 storagePolicyName: <storage-policy-name> (1)
    1 Name of the storage policy that you created for encryption

Multiple vCenter support for vSphere CSI

Deploying OKD across multiple vSphere vCenter clusters without shared storage for high availability can be helpful. OKD v4.17, and later, supports this capability.

Multiple vCenters can only be configured during installation. Multiple vCenters cannot be configured after installation.

The maximum number of supported vCenter clusters is three.

Multiple vCenter support for vSphere CSI is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

Configuring multiple vCenters during installation

To configure multiple vCenters during installation:

  • Specify multiple vSphere clusters during installation. For information, see "Installation configuration parameters for vSphere".

Additional resources

vSphere CSI topology overview

OKD provides the ability to deploy OKD for vSphere on different zones and regions, which allows you to deploy over multiple compute clusters and data centers, thus helping to avoid a single point of failure.

This is accomplished by defining zone and region categories in vCenter, and then assigning these categories to different failure domains, such as a compute cluster, by creating tags for these zone and region categories. After you have created the appropriate categories, and assigned tags to vCenter objects, you can create additional machinesets that create virtual machines (VMs) that are responsible for scheduling pods in those failure domains.

The following example defines two failure domains with one region and two zones:

Table 1. vSphere storage topology with one region and two zones
Compute cluster Failure domain Description

Compute cluster: ocp1, Data center: Atlanta

openshift-region: us-east-1 (tag), openshift-zone: us-east-1a (tag)

This defines a failure domain in region us-east-1 with zone us-east-1a.

Computer cluster: ocp2, Data center: Atlanta

openshift-region: us-east-1 (tag), openshift-zone: us-east-1b (tag)

This defines a different failure domain within the same region called us-east-1b.

vSphere CSI topology requirements

The following guidelines are recommended for vSphere CSI topology:

  • You are strongly recommended to add topology tags to data centers and compute clusters, and not to hosts.

    vsphere-problem-detector provides alerts if the openshift-region or openshift-zone tags are not defined at the data center or compute cluster level, and each topology tag (openshift-region or openshift-zone) should occur only once in the hierarchy.

    Ignoring this recommendation only results in a log warning from the CSI driver and duplicate tags lower in the hierarchy, such as hosts, are ignored; VMware considers this an invalid configuration, and therefore to prevent problems you should not use it.

  • Volume provisioning requests in topology-aware environments attempt to create volumes in datastores accessible to all hosts under a given topology segment. This includes hosts that do not have Kubernetes node VMs running on them. For example, if the vSphere Container Storage Plug-in driver receives a request to provision a volume in zone-a, applied on the data center dc-1, all hosts under dc-1 must have access to the datastore selected for volume provisioning. The hosts include those that are directly under dc-1, and those that are a part of clusters inside dc-1.

  • For additional recommendations, you should read the VMware Guidelines and Best Practices for Deployment with Topology section.

Creating vSphere storage topology during installation

Procedure

  • Specify the topology during installation. See the Configuring regions and zones for a VMware vCenter section.

No additional action is necessary and the default storage class that is created by OKD is topology aware and should allow provisioning of volumes in different failure domains.

Additional resources

Creating vSphere storage topology postinstallation

Procedure

  1. In the VMware vCenter vSphere client GUI, define appropriate zone and region catagories and tags.

    While vSphere allows you to create categories with any arbitrary name, OKD strongly recommends use of openshift-region and openshift-zone names for defining topology categories.

    For more information about vSphere categories and tags, see the VMware vSphere documentation.

  2. In OKD, create failure domains. See the Specifying multiple regions and zones for your cluster on vSphere section.

  3. Create a tag to assign to datastores across failure domains:

    When an OKD spans more than one failure domain, the datastore might not be shared across those failure domains, which is where topology-aware provisioning of persistent volumes (PVs) is useful.

    1. In vCenter, create a category for tagging the datastores. For example, openshift-zonal-datastore-cat. You can use any other category name, provided the category uniquely is used for tagging datastores participating in OKD cluster. Also, ensure that StoragePod, Datastore, and Folder are selected as Associable Entities for the created category.

    2. In vCenter, create a tag that uses the previously created category. This example uses the tag name openshift-zonal-datastore.

    3. Assign the previously created tag (in this example openshift-zonal-datastore) to each datastore in a failure domain that would be considered for dynamic provisioning.

      You can use any names you like for datastore categories and tags. The names used in this example are provided as recommendations. Ensure that the tags and categories that you define uniquely identify only datastores that are shared with all hosts in the OKD cluster.

  4. As needed, create a storage policy that targets the tag-based datastores in each failure domain:

    1. In vCenter, from the main menu, click Policies and Profiles.

    2. On the Policies and Profiles page, in the navigation pane, click VM Storage Policies.

    3. Click CREATE.

    4. Type a name for the storage policy.

    5. For the rules, choose Tag Placement rules and select the tag and category that targets the desired datastores (in this example, the openshift-zonal-datastore tag).

      The datastores are listed in the storage compatibility table.

  5. Create a new storage class that uses the new zoned storage policy:

    1. Click Storage > StorageClasses.

    2. On the StorageClasses page, click Create StorageClass.

    3. Type a name for the new storage class in Name.

    4. Under Provisioner, select csi.vsphere.vmware.com.

    5. Under Additional parameters, for the StoragePolicyName parameter, set Value to the name of the new zoned storage policy that you created earlier.

    6. Click Create.

      Example output
      kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
  name: zoned-sc (1)
provisioner: csi.vsphere.vmware.com
parameters:
  StoragePolicyName: zoned-storage-policy (2)
reclaimPolicy: Delete
allowVolumeExpansion: true
volumeBindingMode: WaitForFirstConsumer
      1 New topology aware storage class name.
      2 Specify zoned storage policy.

      You can also create the storage class by editing the preceding YAML file and running the command oc create -f $FILE.
Additional resources

Creating vSphere storage topology without an infra topology

OKD recommends using the infrastructure object for specifying failure domains in a topology aware setup. Specifying failure domains in the infrastructure object and specify topology-categories in the ClusterCSIDriver object at the same time is an unsupported operation.

Procedure

  1. In the VMware vCenter vSphere client GUI, define appropriate zone and region catagories and tags.

    While vSphere allows you to create categories with any arbitrary name, OKD strongly recommends use of openshift-region and openshift-zone names for defining topology.

    For more information about vSphere categories and tags, see the VMware vSphere documentation.

  2. To allow the container storage interface (CSI) driver to detect this topology, edit the clusterCSIDriver object YAML file driverConfig section:

    • Specify the openshift-zone and openshift-region categories that you created earlier.

    • Set driverType to vSphere.

      ~ $ oc edit clustercsidriver csi.vsphere.vmware.com -o yaml
      Example output
      apiVersion: operator.openshift.io/v1
kind: ClusterCSIDriver
metadata:
  name: csi.vsphere.vmware.com
spec:
  logLevel: Normal
  managementState: Managed
  observedConfig: null
  operatorLogLevel: Normal
  unsupportedConfigOverrides: null
  driverConfig:
    driverType: vSphere (1)
      vSphere:
        topologyCategories: (2)
        - openshift-zone
        - openshift-region
      1 Ensure that driverType is set to vSphere.
      2 openshift-zone and openshift-region categories created earlier in vCenter.

  3. Verify that CSINode object has topology keys by running the following commands:

    ~ $ oc get csinode
    Example output
    NAME DRIVERS AGE
co8-4s88d-infra-2m5vd 1 27m
co8-4s88d-master-0 1 70m
co8-4s88d-master-1 1 70m
co8-4s88d-master-2 1 70m
co8-4s88d-worker-j2hmg 1 47m
co8-4s88d-worker-mbb46 1 47m
co8-4s88d-worker-zlk7d 1 47m
    ~ $ oc get csinode co8-4s88d-worker-j2hmg -o yaml
    Example output
    ...
spec:
  drivers:
  - allocatable:
      count: 59
  name: csi-vsphere.vmware.com
  nodeID: co8-4s88d-worker-j2hmg
  topologyKeys: (1)
  - topology.csi.vmware.com/openshift-zone
  - topology.csi.vmware.com/openshift-region
    1 Topology keys from vSphere openshift-zone and openshift-region catagories.

    CSINode objects might take some time to receive updated topology information. After the driver is updated, CSINode objects should have topology keys in them.

  4. Create a tag to assign to datastores across failure domains:

    When an OKD spans more than one failure domain, the datastore might not be shared across those failure domains, which is where topology-aware provisioning of persistent volumes (PVs) is useful.

    1. In vCenter, create a category for tagging the datastores. For example, openshift-zonal-datastore-cat. You can use any other category name, provided the category uniquely is used for tagging datastores participating in OKD cluster. Also, ensure that StoragePod, Datastore, and Folder are selected as Associable Entities for the created category.

    2. In vCenter, create a tag that uses the previously created category. This example uses the tag name openshift-zonal-datastore.

    3. Assign the previously created tag (in this example openshift-zonal-datastore) to each datastore in a failure domain that would be considered for dynamic provisioning.

      You can use any names you like for categories and tags. The names used in this example are provided as recommendations. Ensure that the tags and categories that you define uniquely identify only datastores that are shared with all hosts in the OKD cluster.

  5. Create a storage policy that targets the tag-based datastores in each failure domain:

    1. In vCenter, from the main menu, click Policies and Profiles.

    2. On the Policies and Profiles page, in the navigation pane, click VM Storage Policies.

    3. Click CREATE.

    4. Type a name for the storage policy.

    5. For the rules, choose Tag Placement rules and select the tag and category that targets the desired datastores (in this example, the openshift-zonal-datastore tag).

      The datastores are listed in the storage compatibility table.

  6. Create a new storage class that uses the new zoned storage policy:

    1. Click Storage > StorageClasses.

    2. On the StorageClasses page, click Create StorageClass.

    3. Type a name for the new storage class in Name.

    4. Under Provisioner, select csi.vsphere.vmware.com.

    5. Under Additional parameters, for the StoragePolicyName parameter, set Value to the name of the new zoned storage policy that you created earlier.

    6. Click Create.

      Example output
      kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
  name: zoned-sc (1)
provisioner: csi.vsphere.vmware.com
parameters:
  StoragePolicyName: zoned-storage-policy (2)
reclaimPolicy: Delete
allowVolumeExpansion: true
volumeBindingMode: WaitForFirstConsumer
      1 New topology aware storage class name.
      2 Specify zoned storage policy.

      You can also create the storage class by editing the preceding YAML file and running the command oc create -f $FILE.
Additional resources

Results

Creating persistent volume claims (PVCs) and PVs from the topology aware storage class are truly zonal, and should use the datastore in their respective zone depending on how pods are scheduled:

~ $ oc get pv <pv-name> -o yaml
Example output
...
nodeAffinity:
  required:
    nodeSelectorTerms:
    - matchExpressions:
      - key: topology.csi.vmware.com/openshift-zone (1)
        operator: In
        values:
        - <openshift-zone>
      -key: topology.csi.vmware.com/openshift-region (1)
        operator: In
        values:
        - <openshift-region>
...
peristentVolumeclaimPolicy: Delete
storageClassName: <zoned-storage-class-name> (2)
volumeMode: Filesystem
...
1 PV has zoned keys.
2 PV is using the zoned storage class.

Changing the maximum number of snapshots for vSphere

The default maximum number of snapshots per volume in vSphere Container Storage Interface (CSI) is 3. You can change the maximum number up to 32 per volume.

However, be aware that increasing the snapshot maximum involves a performance trade off, so for better performance use only 2 to 3 snapshots per volume.

For more VMware snapshot performance recommendations, see Additional resources.

Prerequisites

  • Access to the cluster with administrator rights.

Procedure

  1. Check the current config map by the running the following command:

    $ oc -n openshift-cluster-csi-drivers get cm/vsphere-csi-config -o yaml
    Example output
    apiVersion: v1
data:
  cloud.conf: |+
    # Labels with topology values are added dynamically via operator
    [Global]
    cluster-id = vsphere-01-cwv8p

    [VirtualCenter "vcenter.openshift.com"]
    insecure-flag           = true
    datacenters             = DEVQEdatacenter
    migration-datastore-url = ds:///vmfs/volumes/vsan:527320283a8c3163-2faa6dc5949a3a28/

kind: ConfigMap
metadata:
  creationTimestamp: "2024-03-06T09:46:40Z"
  name: vsphere-csi-config
  namespace: openshift-cluster-csi-drivers
  resourceVersion: "126687"

    In this example, the global maximum number of snapshots is not configured, so the default value of 3 is applied.

  2. Change the snapshot limit by running the following command:

    • Set global snapshot limit:

      $ oc patch clustercsidriver/csi.vsphere.vmware.com --type=merge -p '{"spec":{"driverConfig":{"vSphere":{"globalMaxSnapshotsPerBlockVolume": 10}}}}'
clustercsidriver.operator.openshift.io/csi.vsphere.vmware.com patched

      In this example, the global limit is being changed to 10 (globalMaxSnapshotsPerBlockVolume set to 10).

    • Set Virtual Volume snapshot limit:

      This parameter sets the limit on the Virtual Volumes datastore only. The Virtual Volume maximum snapshot limit overrides the global constraint if set, but defaults to the global limit if it is not set.

      $ oc patch clustercsidriver/csi.vsphere.vmware.com --type=merge -p '{"spec":{"driverConfig":{"vSphere":{"granularMaxSnapshotsPerBlockVolumeInVVOL": 5}}}}'
clustercsidriver.operator.openshift.io/csi.vsphere.vmware.com patched

      In this example, the Virtual Volume limit is being changed to 5 (granularMaxSnapshotsPerBlockVolumeInVVOL set to 5).

    • Set vSAN snapshot limit:

      This parameter sets the limit on the vSAN datastore only. The vSAN maximum snapshot limit overrides the global constraint if set, but defaults to the global limit if it is not set. You can set a maximum value of 32 under vSAN ESA setup.

      $ oc patch clustercsidriver/csi.vsphere.vmware.com --type=merge -p '{"spec":{"driverConfig":{"vSphere":{"granularMaxSnapshotsPerBlockVolumeInVSAN": 7}}}}'
clustercsidriver.operator.openshift.io/csi.vsphere.vmware.com patched

      In this example, the vSAN limit is being changed to 7 (granularMaxSnapshotsPerBlockVolumeInVSAN set to 7).

Verification

  • Verify that any changes you made are reflected in the config map by running the following command:

    $ oc -n openshift-cluster-csi-drivers get cm/vsphere-csi-config -o yaml
    Example output
    apiVersion: v1
data:
  cloud.conf: |+
    # Labels with topology values are added dynamically via operator
    [Global]
    cluster-id = vsphere-01-cwv8p

    [VirtualCenter "vcenter.openshift.com"]
    insecure-flag           = true
    datacenters             = DEVQEdatacenter
    migration-datastore-url = ds:///vmfs/volumes/vsan:527320283a8c3163-2faa6dc5949a3a28/

    [Snapshot]
    global-max-snapshots-per-block-volume = 10 (1)

kind: ConfigMap
metadata:
  creationTimestamp: "2024-03-06T09:46:40Z"
  name: vsphere-csi-config
  namespace: openshift-cluster-csi-drivers
  resourceVersion: "127118"
  uid: f6968303-81d8-4048-99c1-d8211363d0fa
    1 global-max-snapshots-per-block-volume is now set to 10.

Disabling and enabling storage on vSphere

Cluster administrators might want to disable the VMware vSphere Container Storage Interface (CSI) Driver as a Day 2 operation, so the vSphere CSI Driver does not interface with your vSphere setup.

Disabling and enabling storage on vSphere is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

Consequences of disabling and enabling storage on vSphere

The consequences of disabling and enabling storage on vSphere are described in the following table.

Table 2. Consequences of disabling/enabling storage on vSphere
Disabling Enabling

  • vSphere CSI Driver Operator un-installs the CSI driver.

  • Storage container orchestration (CO) should be healthy.

  • vSphere-problem-detector continues running, but does not emit alerts or events, and checks less frequently (once per 24 hours).

  • All existing persistent volumes (PVs), persistent volume claims (PVCs), and vSphere storage policies are unchanged:

    • vSphere PVs cannot be used in new pods.

    • vSphere PVs stay mounted and attached forever to existing nodes for existing pods. These pods remain in terminating state indefinitely after deletion.

  • Storage classes are removed

* vSphere CSI Driver Operator re-installs the CSI driver.

* If necessary, the vSphere CSI Driver Operator creates the vSphere storage policy.

Disabling and enabling storage on vSphere

Before running this procedure, carefully review the preceding "Consequences of disabling and enabling storage on vSphere" table and potential impacts to your environment.
Procedure

To disable or enable storage on vSphere:

  1. Click Administration > CustomResourceDefinitions.

  2. On the CustomResourceDefinitions page next to the Name dropdown box, type "clustercsidriver".

  3. Click CRD ClusterCSIDriver.

  4. Click the Instances tab.

  5. Click csi.vsphere.vmware.com.

  6. Click the YAML tab.

  7. For spec.managementState, change the value to Removed or Managed:

    • Removed: storage is disabled

    • Managed: storage is enabled

  8. Click Save.

  9. If you are disabling storage, confirm that the driver has been removed:

    1. Click Workloads > Pods.

    2. On the Pods page, in the Name filter box type "vmware-vsphere-csi-driver".

      The only item that should appear is the operator. For example: " vmware-vsphere-csi-driver-operator-559b97ffc5-w99fm"

Additional resources