Configuring OADP with OpenShift Virtualization - OADP Application backup and restore | Backup and restore

Installing and configuring OADP with OKD Virtualization
Installing the Data Protection Application
Backing up a single VM
Restoring a single VM
Restoring a single VM from a backup of multiple VMs
Configuring the DPA with client burst and QPS settings
Configuring the node agent as a non-root and non-privileged user
Configuring node agents and node labels
Configuring node agent load affinity
Node agent load affinity guidelines
Configuring node agent load concurrency
Configuring repository maintenance
Configuring Velero load affinity
- Overriding the imagePullPolicy setting in the DPA
- About incremental back up support

You can install the OpenShift API for Data Protection (OADP) with OKD Virtualization by installing the OADP Operator and configuring a backup location. Then, you can install the Data Protection Application.

Back up and restore virtual machines by using the OpenShift API for Data Protection.

OpenShift API for Data Protection with OKD Virtualization supports the following backup and restore storage options:

Container Storage Interface (CSI) backups
Container Storage Interface (CSI) backups with DataMover

The following storage options are excluded:

File system backup and restore
Volume snapshot backups and restores

For more information, see Backing up applications with File System Backup: Kopia or Restic.

To install the OADP Operator in a restricted network environment, you must first disable the default software catalog sources and mirror the Operator catalog. See Using Operator Lifecycle Manager in disconnected environments for details.

Installing and configuring OADP with OKD Virtualization

As a cluster administrator, you install OADP by installing the OADP Operator.

The latest version of the OADP Operator installs Velero 1.16.

Prerequisites

Access to the cluster as a user with the cluster-admin role.

Procedure

Install the OADP Operator according to the instructions for your storage provider.
Install the Data Protection Application (DPA) with the kubevirt and openshift OADP plugins.
Back up virtual machines by creating a Backup custom resource (CR).
Red Hat support is limited to only the following options:

CSI backups

CSI backups with DataMover.

You restore the Backup CR by creating a Restore CR.

Additional resources

Installing the Data Protection Application

You install the Data Protection Application (DPA) by creating an instance of the DataProtectionApplication API.

Prerequisites

You must install the OADP Operator.
You must configure object storage as a backup location.
If you use snapshots to back up PVs, your cloud provider must support either a native snapshot API or Container Storage Interface (CSI) snapshots.

If the backup and snapshot locations use the same credentials, you must create a Secret with the default name, cloud-credentials.

If you do not want to specify backup or snapshot locations during the installation, you can create a default Secret with an empty credentials-velero file. If there is no default Secret, the installation will fail.

Procedure

Click Ecosystem → Installed Operators and select the OADP Operator.
Under Provided APIs, click Create instance in the DataProtectionApplication box.
Click YAML View and update the parameters of the DataProtectionApplication manifest:
```
apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
metadata:
  name: <dpa_sample>
  namespace: openshift-adp
spec:
  configuration:
    velero:
      defaultPlugins:
        - kubevirt
        - gcp
        - csi
        - openshift
      resourceTimeout: 10m
    nodeAgent:
      enable: true
      uploaderType: kopia
      podConfig:
        nodeSelector: <node_selector>
  backupLocations:
    - velero:
        provider: gcp
        default: true
        credential:
          key: cloud
          name: <default_secret>
        objectStorage:
          bucket: <bucket_name>
          prefix: <prefix>
```
where:

namespace

Specifies the default namespace for OADP which is openshift-adp. The namespace is a variable and is configurable.

kubevirt

Specifies that the kubevirt plugin is mandatory for OKD Virtualization.

gcp

Specifies the plugin for the backup provider, for example, gcp, if it exists.

csi

Specifies that the csi plugin is mandatory for backing up PVs with CSI snapshots. The csi plugin uses the Velero CSI beta snapshot APIs. You do not need to configure a snapshot location.

openshift

Specifies that the openshift plugin is mandatory.

resourceTimeout

Specifies how many minutes to wait for several Velero resources such as Velero CRD availability, volumeSnapshot deletion, and backup repository availability, before timeout occurs. The default is 10m.

nodeAgent

Specifies the administrative agent that routes the administrative requests to servers.

enable

Set this value to true if you want to enable nodeAgent and perform File System Backup.

uploaderType

Specifies the uploader type. Enter kopia as your uploader to use the Built-in DataMover. The nodeAgent deploys a daemon set, which means that the nodeAgent pods run on each working node. You can configure File System Backup by adding spec.defaultVolumesToFsBackup: true to the Backup CR.

nodeSelector

Specifies the nodes on which Kopia are available. By default, Kopia runs on all nodes.

provider

Specifies the backup provider.

name

Specifies the correct default name for the Secret, for example, cloud-credentials-gcp, if you use a default plugin for the backup provider. If specifying a custom name, then the custom name is used for the backup location. If you do not specify a Secret name, the default name is used.

bucket

Specifies a bucket as the backup storage location. If the bucket is not a dedicated bucket for Velero backups, you must specify a prefix.

prefix

Specifies a prefix for Velero backups, for example, velero, if the bucket is used for multiple purposes.
Click Create.

Verification

Verify the installation by viewing the OpenShift API for Data Protection (OADP) resources by running the following command:

$ oc get all -n openshift-adp

NAME                                                     READY   STATUS    RESTARTS   AGE
pod/oadp-operator-controller-manager-67d9494d47-6l8z8    2/2     Running   0          2m8s
pod/node-agent-9cq4q                                     1/1     Running   0          94s
pod/node-agent-m4lts                                     1/1     Running   0          94s
pod/node-agent-pv4kr                                     1/1     Running   0          95s
pod/velero-588db7f655-n842v                              1/1     Running   0          95s

NAME                                                       TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)    AGE
service/oadp-operator-controller-manager-metrics-service   ClusterIP   172.30.70.140    <none>        8443/TCP   2m8s
service/openshift-adp-velero-metrics-svc                   ClusterIP   172.30.10.0      <none>        8085/TCP   8h

NAME                        DESIRED   CURRENT   READY   UP-TO-DATE   AVAILABLE   NODE SELECTOR   AGE
daemonset.apps/node-agent    3         3         3       3            3           <none>          96s

NAME                                                READY   UP-TO-DATE   AVAILABLE   AGE
deployment.apps/oadp-operator-controller-manager    1/1     1            1           2m9s
deployment.apps/velero                              1/1     1            1           96s

NAME                                                           DESIRED   CURRENT   READY   AGE
replicaset.apps/oadp-operator-controller-manager-67d9494d47    1         1         1       2m9s
replicaset.apps/velero-588db7f655                              1         1         1       96s

Verify that the DataProtectionApplication (DPA) is reconciled by running the following command:

$ oc get dpa dpa-sample -n openshift-adp -o jsonpath='{.status}'

{"conditions":[{"lastTransitionTime":"2023-10-27T01:23:57Z","message":"Reconcile complete","reason":"Complete","status":"True","type":"Reconciled"}]}

Verify the type is set to Reconciled.

Verify the backup storage location and confirm that the PHASE is Available by running the following command:

$ oc get backupstoragelocations.velero.io -n openshift-adp

NAME           PHASE       LAST VALIDATED   AGE     DEFAULT
dpa-sample-1   Available   1s               3d16h   true

If you run a backup of a Microsoft Windows virtual machine (VM) immediately after the VM reboots, the backup might fail with a PartiallyFailed error. This is because, immediately after a VM boots, the Microsoft Windows Volume Shadow Copy Service (VSS) and Guest Agent (GA) service are not ready. The VSS and GA service being unready causes the backup to fail. In such a case, retry the backup a few minutes after the VM boots.

Backing up a single VM

If you have a namespace with multiple virtual machines (VMs), and want to back up only one of them, you can use the label selector to filter the VM that needs to be included in the backup. You can filter the VM by using the app: vmname label.

Prerequisites

You have installed the OADP Operator.
You have multiple VMs running in a namespace.
You have added the kubevirt plugin in the DataProtectionApplication (DPA) custom resource (CR).
You have configured the BackupStorageLocation CR in the DataProtectionApplication CR and BackupStorageLocation is available.

Procedure

Configure the Backup CR as shown in the following example:

Example Backup CR

apiVersion: velero.io/v1
kind: Backup
metadata:
  name: vmbackupsingle
  namespace: openshift-adp
spec:
  snapshotMoveData: true
  includedNamespaces:
  - <vm_namespace> (1)
  labelSelector:
    matchLabels:
      app: <vm_app_name> (2)
  storageLocation: <backup_storage_location_name> (3)

1	Specify the name of the namespace where you have created the VMs.
2	Specify the VM name that needs to be backed up.
3	Specify the name of the `BackupStorageLocation` CR.

To create a Backup CR, run the following command:
```
$ oc apply -f <backup_cr_file_name> (1)
```
1 Specify the name of the Backup CR file.

Restoring a single VM

After you have backed up a single virtual machine (VM) by using the label selector in the Backup custom resource (CR), you can create a Restore CR and point it to the backup. This restore operation restores a single VM.

Prerequisites

You have installed the OADP Operator.
You have backed up a single VM by using the label selector.

Procedure

Configure the Restore CR as shown in the following example:

Example Restore CR

apiVersion: velero.io/v1
kind: Restore
metadata:
  name: vmrestoresingle
  namespace: openshift-adp
spec:
  backupName: vmbackupsingle (1)
  restorePVs: true

1	Specifies the name of the backup of a single VM.

To restore the single VM, run the following command:

$ oc apply -f <restore_cr_file_name> (1)

1	Specify the name of the `Restore` CR file.

When you restore a backup of VMs, you might notice that the Ceph storage capacity allocated for the restore is higher than expected. This behavior is observed only during the kubevirt restore and if the volume type of the VM is block.

Use the rbd sparsify tool to reclaim space on target volumes. For more details, see Reclaiming space on target volumes.

Restoring a single VM from a backup of multiple VMs

If you have a backup containing multiple virtual machines (VMs), and you want to restore only one VM, you can use the LabelSelectors section in the Restore CR to select the VM to restore. To ensure that the persistent volume claim (PVC) attached to the VM is correctly restored, and the restored VM is not stuck in a Provisioning status, use both the app: <vm_name> and the kubevirt.io/created-by labels. To match the kubevirt.io/created-by label, use the UID of DataVolume of the VM.

Prerequisites

You have installed the OADP Operator.
You have labeled the VMs that need to be backed up.
You have a backup of multiple VMs.

Procedure

Before you take a backup of many VMs, ensure that the VMs are labeled by running the following command:
```
$ oc label vm <vm_name> app=<vm_name> -n openshift-adp
```

Configure the label selectors in the Restore CR as shown in the following example:

Example Restore CR

apiVersion: velero.io/v1
kind: Restore
metadata:
  name: singlevmrestore
  namespace: openshift-adp
spec:
  backupName: multiplevmbackup
  restorePVs: true
  LabelSelectors:
    - matchLabels:
        kubevirt.io/created-by: <datavolume_uid> (1)
    - matchLabels:
        app: <vm_name> (2)

1	Specify the UID of `DataVolume` of the VM that you want to restore. For example, `b6…53a-ddd7-4d9d-9407-a0c…e5`.
2	Specify the name of the VM that you want to restore. For example, `test-vm`.

To restore a VM, run the following command:
```
$ oc apply -f <restore_cr_file_name> (1)
```
1 Specify the name of the Restore CR file.

Configuring the DPA with client burst and QPS settings

The burst setting determines how many requests can be sent to the velero server before the limit is applied. After the burst limit is reached, the queries per second (QPS) setting determines how many additional requests can be sent per second.

You can set the burst and QPS values of the velero server by configuring the Data Protection Application (DPA) with the burst and QPS values. You can use the dpa.configuration.velero.client-burst and dpa.configuration.velero.client-qps fields of the DPA to set the burst and QPS values.

Prerequisites

You have installed the OADP Operator.

Procedure

Configure the client-burst and the client-qps fields in the DPA as shown in the following example:

Example Data Protection Application

apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
metadata:
  name: test-dpa
  namespace: openshift-adp
spec:
  backupLocations:
    - name: default
      velero:
        config:
          insecureSkipTLSVerify: "true"
          profile: "default"
          region: <bucket_region>
          s3ForcePathStyle: "true"
          s3Url: <bucket_url>
        credential:
          key: cloud
          name: cloud-credentials
        default: true
        objectStorage:
          bucket: <bucket_name>
          prefix: velero
        provider: aws
  configuration:
    nodeAgent:
      enable: true
      uploaderType: restic
    velero:
      client-burst: 500
      client-qps: 300
      defaultPlugins:
        - openshift
        - aws
        - kubevirt

where:

client-burst: Specifies the client-burst value. In this example, the client-burst field is set to 500.
client-qps: Specifies the client-qps value. In this example, the client-qps field is set to 300.

Configuring the node agent as a non-root and non-privileged user

To enhance the node agent security, you can configure the OADP Operator node agent daemonset to run as a non-root and non-privileged user by using the spec.configuration.velero.disableFsBackup setting in the DataProtectionApplication (DPA) custom resource (CR).

By setting the spec.configuration.velero.disableFsBackup setting to true, the node agent security context sets the root file system to read-only and sets the privileged flag to false.

Setting spec.configuration.velero.disableFsBackup to true enhances the node agent security by removing the need for privileged containers and enforcing a read-only root file system.

However, it also disables File System Backup (FSB) with Kopia. If your workloads rely on FSB for backing up volumes that do not support native snapshots, then you should evaluate whether the disableFsBackup configuration fits your use case.

Prerequisites

You have installed the OADP Operator.

Procedure

Configure the disableFsBackup field in the DPA as shown in the following example:

apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
metadata:
  name: ts-dpa
  namespace: openshift-adp
spec:
  backupLocations:
  - velero:
      credential:
        key: cloud
        name: cloud-credentials
      default: true
      objectStorage:
        bucket: <bucket_name>
        prefix: velero
      provider: gcp
  configuration:
    nodeAgent:
      enable: true
      uploaderType: kopia
    velero:
      defaultPlugins:
      - csi
      - gcp
      - openshift
      disableFsBackup: true

where:

nodeAgent: Specifies to enable the node agent in the DPA.
disableFsBackup: Specifies to set the disableFsBackup field to true.

Verification

Verify that the node agent security context is set to run as non-root and the root file system is readOnly by running the following command:

$ oc get daemonset node-agent -o yaml

The example output is as following:

apiVersion: apps/v1
kind: DaemonSet
metadata:
  ...
  name: node-agent
  namespace: openshift-adp
  ...
spec:
  ...
  template:
    metadata:
      ...
    spec:
      containers:
      ...
        securityContext:
          allowPrivilegeEscalation: false
          capabilities:
            drop:
            - ALL
          privileged: false
          readOnlyRootFilesystem: true
        ...
      nodeSelector:
        kubernetes.io/os: linux
      os:
        name: linux
      restartPolicy: Always
      schedulerName: default-scheduler
      securityContext:
        runAsNonRoot: true
        seccompProfile:
          type: RuntimeDefault
      serviceAccount: velero
      serviceAccountName: velero
      ....

where:

allowPrivilegeEscalation: Specifies that the allowPrivilegeEscalation field is false.
privileged: Specifies that the privileged field is false.
readOnlyRootFilesystem: Specifies that the root file system is read-only.
runAsNonRoot: Specifies that the node agent is run as a non-root user.

Configuring node agents and node labels

The Data Protection Application (DPA) uses the nodeSelector field to select which nodes can run the node agent. The nodeSelector field is the recommended form of node selection constraint.

Procedure

Run the node agent on any node that you choose by adding a custom label:
```
$ oc label node/<node_name> node-role.kubernetes.io/nodeAgent=""
```
Any label specified must match the labels on each node.

Use the same custom label in the DPA.spec.configuration.nodeAgent.podConfig.nodeSelector field, which you used for labeling nodes:

configuration:
  nodeAgent:
    enable: true
    podConfig:
      nodeSelector:
        node-role.kubernetes.io/nodeAgent: ""

The following example is an anti-pattern of nodeSelector and does not work unless both labels, node-role.kubernetes.io/infra: "" and node-role.kubernetes.io/worker: "", are on the node:

    configuration:
      nodeAgent:
        enable: true
        podConfig:
          nodeSelector:
            node-role.kubernetes.io/infra: ""
            node-role.kubernetes.io/worker: ""

Configuring node agent load affinity

You can schedule the node agent pods on specific nodes by using the spec.podConfig.nodeSelector object of the DataProtectionApplication (DPA) custom resource (CR).

See the following example in which you can schedule the node agent pods on nodes with the label label.io/role: cpu-1 and other-label.io/other-role: cpu-2.

...
spec:
  configuration:
    nodeAgent:
      enable: true
      uploaderType: kopia
      podConfig:
        nodeSelector:
          label.io/role: cpu-1
          other-label.io/other-role: cpu-2
        ...

You can add more restrictions on the node agent pods scheduling by using the nodeagent.loadAffinity object in the DPA spec.

Prerequisites

You must be logged in as a user with cluster-admin privileges.
You have installed the OADP Operator.
You have configured the DPA CR.

Procedure

Configure the DPA spec nodegent.loadAffinity object as shown in the following example.

In the example, you ensure that the node agent pods are scheduled only on nodes with the label label.io/role: cpu-1 and the label label.io/hostname matching with either node1 or node2.

...
spec:
  configuration:
    nodeAgent:
      enable: true
      loadAffinity:
        - nodeSelector:
            matchLabels:
              label.io/role: cpu-1
            matchExpressions:
              - key: label.io/hostname
                operator: In
                values:
                  - node1
                  - node2
                  ...

where:

loadAffinity: Specifies the loadAffinity object by adding the matchLabels and matchExpressions objects.
matchExpressions: Specifies the matchExpressions object to add restrictions on the node agent pods scheduling.

Node agent load affinity guidelines

Use the following guidelines to configure the node agent loadAffinity object in the DataProtectionApplication (DPA) custom resource (CR).

Use the spec.nodeagent.podConfig.nodeSelector object for simple node matching.
Use the loadAffinity.nodeSelector object without the podConfig.nodeSelector object for more complex scenarios.
You can use both podConfig.nodeSelector and loadAffinity.nodeSelector objects, but the loadAffinity object must be equal or more restrictive as compared to the podConfig object. In this scenario, the podConfig.nodeSelector labels must be a subset of the labels used in the loadAffinity.nodeSelector object.
You cannot use the matchExpressions and matchLabels fields if you have configured both podConfig.nodeSelector and loadAffinity.nodeSelector objects in the DPA.

See the following example to configure both podConfig.nodeSelector and loadAffinity.nodeSelector objects in the DPA.

...
spec:
  configuration:
    nodeAgent:
      enable: true
      uploaderType: kopia
      loadAffinity:
        - nodeSelector:
            matchLabels:
              label.io/location: 'US'
              label.io/gpu: 'no'
      podConfig:
        nodeSelector:
          label.io/gpu: 'no'

Configuring node agent load concurrency

You can control the maximum number of node agent operations that can run simultaneously on each node within your cluster.

You can configure it using one of the following fields of the Data Protection Application (DPA):

globalConfig: Defines a default concurrency limit for the node agent across all nodes.
perNodeConfig: Specifies different concurrency limits for specific nodes based on nodeSelector labels. This provides flexibility for environments where certain nodes might have different resource capacities or roles.

Prerequisites

You must be logged in as a user with cluster-admin privileges.

Procedure

If you want to use load concurrency for specific nodes, add labels to those nodes:
```
$ oc label node/<node_name> label.io/instance-type='large'
```
Configure the load concurrency fields for your DPA instance:
```
  configuration:
    nodeAgent:
      enable: true
      uploaderType: kopia
      loadConcurrency:
        globalConfig: 1
        perNodeConfig:
        - nodeSelector:
              matchLabels:
                 label.io/instance-type: large
          number: 3
```
where:

globalConfig

Specifies the global concurrent number. The default value is 1, which means there is no concurrency and only one load is allowed. The globalConfig value does not have a limit.

label.io/instance-type

Specifies the label for per-node concurrency.

number

Specifies the per-node concurrent number. You can specify many per-node concurrent numbers, for example, based on the instance type and size. The range of per-node concurrent number is the same as the global concurrent number. If the configuration file contains a per-node concurrent number and a global concurrent number, the per-node concurrent number takes precedence.

Configuring repository maintenance

OADP repository maintenance is a background job, you can configure it independently of the node agent pods. This means that you can schedule the repository maintenance pod on a node where the node agent is or is not running.

You can use the repository maintenance job affinity configurations in the DataProtectionApplication (DPA) custom resource (CR) only if you use Kopia as the backup repository.

You have the option to configure the load affinity at the global level affecting all repositories. Or you can configure the load affinity for each repository. You can also use a combination of global and per-repository configuration.

Prerequisites

You must be logged in as a user with cluster-admin privileges.
You have installed the OADP Operator.
You have configured the DPA CR.

Procedure

Configure the loadAffinity object in the DPA spec by using either one or both of the following methods:

Global configuration: Configure load affinity for all repositories as shown in the following example:

...
spec:
  configuration:
    repositoryMaintenance:
      global:
        podResources:
          cpuRequest: "100m"
          cpuLimit: "200m"
          memoryRequest: "100Mi"
          memoryLimit: "200Mi"
        loadAffinity:
          - nodeSelector:
              matchLabels:
                label.io/gpu: 'no'
              matchExpressions:
                - key: label.io/location
                  operator: In
                  values:
                    - US
                    - EU

where:

repositoryMaintenance: Specifies the repositoryMaintenance object as shown in the example.
global: Specifies the global object to configure load affinity for all repositories.

Per-repository configuration: Configure load affinity per repository as shown in the following example:

...
spec:
  configuration:
    repositoryMaintenance:
      myrepositoryname:
        loadAffinity:
          - nodeSelector:
              matchLabels:
                label.io/cpu: 'yes'

where:

myrepositoryname: Specifies the repositoryMaintenance object for each repository.

Configuring Velero load affinity

With each OADP deployment, there is one Velero pod and its main purpose is to schedule Velero workloads. To schedule the Velero pod, you can use the velero.podConfig.nodeSelector and the velero.loadAffinity objects in the DataProtectionApplication (DPA) custom resource (CR) spec.

Use the podConfig.nodeSelector object to assign the Velero pod to specific nodes. You can also configure the velero.loadAffinity object for pod-level affinity and anti-affinity.

The OpenShift scheduler applies the rules and performs the scheduling of the Velero pod deployment.

Prerequisites

You must be logged in as a user with cluster-admin privileges.
You have installed the OADP Operator.
You have configured the DPA CR.

Procedure

Configure the velero.podConfig.nodeSelector and the velero.loadAffinity objects in the DPA spec as shown in the following examples:

velero.podConfig.nodeSelector object configuration:

...
spec:
  configuration:
    velero:
      podConfig:
        nodeSelector:
          some-label.io/custom-node-role: backup-core

velero.loadAffinity object configuration:

...
spec:
  configuration:
    velero:
      loadAffinity:
        - nodeSelector:
            matchLabels:
              label.io/gpu: 'no'
            matchExpressions:
              - key: label.io/location
                operator: In
                values:
                  - US
                  - EU

Overriding the imagePullPolicy setting in the DPA

In OADP 1.4.0 or earlier, the Operator sets the imagePullPolicy field of the Velero and node agent pods to Always for all images.

In OADP 1.4.1 or later, the Operator first checks if each image has the sha256 or sha512 digest and sets the imagePullPolicy field accordingly:

If the image has the digest, the Operator sets imagePullPolicy to IfNotPresent.
If the image does not have the digest, the Operator sets imagePullPolicy to Always.

You can also override the imagePullPolicy field by using the spec.imagePullPolicy field in the Data Protection Application (DPA).

Prerequisites

You have installed the OADP Operator.

Procedure

Configure the spec.imagePullPolicy field in the DPA as shown in the following example:

Example Data Protection Application

apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
metadata:
  name: test-dpa
  namespace: openshift-adp
spec:
  backupLocations:
    - name: default
      velero:
        config:
          insecureSkipTLSVerify: "true"
          profile: "default"
          region: <bucket_region>
          s3ForcePathStyle: "true"
          s3Url: <bucket_url>
        credential:
          key: cloud
          name: cloud-credentials
        default: true
        objectStorage:
          bucket: <bucket_name>
          prefix: velero
        provider: aws
  configuration:
    nodeAgent:
      enable: true
      uploaderType: kopia
    velero:
      defaultPlugins:
        - openshift
        - aws
        - kubevirt
        - csi
  imagePullPolicy: Never

where:

imagePullPolicy: Specifies the value for imagePullPolicy. In this example, the imagePullPolicy field is set to Never.

About incremental back up support

OADP supports incremental backups of block and Filesystem persistent volumes for both containerized, and OKD Virtualization workloads. The following table summarizes the support for File System Backup (FSB), Container Storage Interface (CSI), and CSI Data Mover:

Table 1. OADP backup support matrix for containerized workloads
Volume mode	FSB - Restic	FSB - Kopia	CSI	CSI Data Mover
Filesystem	S ^[1], I ^[2]	S ^[1], I ^[2]	S ^[1]	S ^[1], I ^[2]
Block	N ^[3]	N ^[3]	S ^[1]	S ^[1], I ^[2]

Table 2. OADP backup support matrix for OKD Virtualization workloads
Volume mode	FSB - Restic	FSB - Kopia	CSI	CSI Data Mover
Filesystem	N ^[3]	N ^[3]	S ^[1]	S ^[1], I ^[2]
Block	N ^[3]	N ^[3]	S ^[1]	S ^[1], I ^[2]

Backup supported
Incremental backup supported
Not supported

The CSI Data Mover backups use Kopia regardless of uploaderType.

Red Hat only supports the combination of OADP versions 1.3.0 and later, and OKD Virtualization versions 4.14 and later.

OADP versions before 1.3.0 are not supported for back up and restore of OKD Virtualization.

Configuring the OpenShift API for Data Protection with {VirtProductName}

Installing and configuring OADP with OKD Virtualization

Installing the Data Protection Application

Backing up a single VM

Restoring a single VM

Restoring a single VM from a backup of multiple VMs

Configuring the DPA with client burst and QPS settings

Configuring the node agent as a non-root and non-privileged user

Configuring node agents and node labels

Configuring node agent load affinity

Node agent load affinity guidelines

Configuring node agent load concurrency

Configuring repository maintenance

Configuring Velero load affinity

Overriding the imagePullPolicy setting in the DPA

About incremental back up support