Config [imageregistry.operator.openshift.io/v1]

affinity

object

affinity is a group of node affinity scheduling rules for the image registry pod(s).

defaultRoute

boolean

defaultRoute indicates whether an external facing route for the registry should be created using the default generated hostname.

disableRedirect

boolean

disableRedirect controls whether to route all data through the Registry, rather than redirecting to the backend.

httpSecret

string

httpSecret is the value needed by the registry to secure uploads, generated by default.

logLevel

string

logLevel is an intent based logging for an overall component. It does not give fine grained control, but it is a simple way to manage coarse grained logging choices that operators have to interpret for their operands. Valid values are: "Normal", "Debug", "Trace", "TraceAll". Defaults to "Normal".

logging

integer

logging is deprecated, use logLevel instead.

managementState

string

managementState indicates whether and how the operator should manage the component

nodeSelector

object (string)

nodeSelector defines the node selection constraints for the registry pod.

observedConfig

``

observedConfig holds a sparse config that controller has observed from the cluster state. It exists in spec because it is an input to the level for the operator

operatorLogLevel

string

operatorLogLevel is an intent based logging for the operator itself. It does not give fine grained control, but it is a simple way to manage coarse grained logging choices that operators have to interpret for themselves. Valid values are: "Normal", "Debug", "Trace", "TraceAll". Defaults to "Normal".

proxy

object

proxy defines the proxy to be used when calling master api, upstream registries, etc.

readOnly

boolean

readOnly indicates whether the registry instance should reject attempts to push new images or delete existing ones.

replicas

integer

replicas determines the number of registry instances to run.

requests

object

requests controls how many parallel requests a given registry instance will handle before queuing additional requests.

resources

object

resources defines the resource requests+limits for the registry pod.

rolloutStrategy

string

rolloutStrategy defines rollout strategy for the image registry deployment.

routes

array

routes defines additional external facing routes which should be created for the registry.

routes[]

object

ImageRegistryConfigRoute holds information on external route access to image registry.

storage

object

storage details for configuring registry storage, e.g. S3 bucket coordinates.

tolerations

array

tolerations defines the tolerations for the registry pod.

tolerations[]

object

The pod this Toleration is attached to tolerates any taint that matches the triple <key,value,effect> using the matching operator <operator>.

topologySpreadConstraints

array

topologySpreadConstraints specify how to spread matching pods among the given topology.

topologySpreadConstraints[]

object

TopologySpreadConstraint specifies how to spread matching pods among the given topology.

unsupportedConfigOverrides

``

unsupportedConfigOverrides overrides the final configuration that was computed by the operator. Red Hat does not support the use of this field. Misuse of this field could lead to unexpected behavior or conflict with other configuration options. Seek guidance from the Red Hat support before using this field. Use of this property blocks cluster upgrades, it must be removed before upgrading your cluster.

nodeAffinity

object

Describes node affinity scheduling rules for the pod.

podAffinity

object

Describes pod affinity scheduling rules (e.g. co-locate this pod in the same node, zone, etc. as some other pod(s)).

podAntiAffinity

object

Describes pod anti-affinity scheduling rules (e.g. avoid putting this pod in the same node, zone, etc. as some other pod(s)).

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node matches the corresponding matchExpressions; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

An empty preferred scheduling term matches all objects with implicit weight 0 (i.e. it’s a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op).

requiredDuringSchedulingIgnoredDuringExecution

object

If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to an update), the system may or may not try to eventually evict the pod from its node.

preference

object

A node selector term, associated with the corresponding weight.

weight

integer

Weight associated with matching the corresponding nodeSelectorTerm, in the range 1-100.

matchExpressions

array

A list of node selector requirements by node’s labels.

matchExpressions[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchFields

array

A list of node selector requirements by node’s fields.

matchFields[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

nodeSelectorTerms

array

Required. A list of node selector terms. The terms are ORed.

nodeSelectorTerms[]

object

A null or empty node selector term matches no objects. The requirements of them are ANDed. The TopologySelectorTerm type implements a subset of the NodeSelectorTerm.

matchExpressions

array

A list of node selector requirements by node’s labels.

matchExpressions[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchFields

array

A list of node selector requirements by node’s fields.

matchFields[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

requiredDuringSchedulingIgnoredDuringExecution

array

If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

requiredDuringSchedulingIgnoredDuringExecution[]

object

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

podAffinityTerm

object

Required. A pod affinity term, associated with the corresponding weight.

weight

integer

weight associated with matching the corresponding podAffinityTerm, in the range 1-100.

labelSelector

object

A label query over a set of resources, in this case pods. If it’s null, this PodAffinityTerm matches with no Pods.

matchLabelKeys

array (string)

MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key in (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

mismatchLabelKeys

array (string)

MismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key notin (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

namespaceSelector

object

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

labelSelector

object

A label query over a set of resources, in this case pods. If it’s null, this PodAffinityTerm matches with no Pods.

matchLabelKeys

array (string)

MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key in (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

mismatchLabelKeys

array (string)

MismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key notin (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

namespaceSelector

object

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the anti-affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling anti-affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

requiredDuringSchedulingIgnoredDuringExecution

array

If the anti-affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the anti-affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

requiredDuringSchedulingIgnoredDuringExecution[]

object

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

podAffinityTerm

object

Required. A pod affinity term, associated with the corresponding weight.

weight

integer

weight associated with matching the corresponding podAffinityTerm, in the range 1-100.

labelSelector

object

A label query over a set of resources, in this case pods. If it’s null, this PodAffinityTerm matches with no Pods.

matchLabelKeys

array (string)

MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key in (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

mismatchLabelKeys

array (string)

MismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key notin (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

namespaceSelector

object

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

labelSelector

object

A label query over a set of resources, in this case pods. If it’s null, this PodAffinityTerm matches with no Pods.

matchLabelKeys

array (string)

MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key in (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

mismatchLabelKeys

array (string)

MismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key notin (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

namespaceSelector

object

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

http

string

http defines the proxy to be used by the image registry when accessing HTTP endpoints.

https

string

https defines the proxy to be used by the image registry when accessing HTTPS endpoints.

noProxy

string

noProxy defines a comma-separated list of host names that shouldn’t go through any proxy.

read

object

read defines limits for image registry’s reads.

write

object

write defines limits for image registry’s writes.

maxInQueue

integer

maxInQueue sets the maximum queued api requests to the registry.

maxRunning

integer

maxRunning sets the maximum in flight api requests to the registry.

maxWaitInQueue

string

maxWaitInQueue sets the maximum time a request can wait in the queue before being rejected.

maxInQueue

integer

maxInQueue sets the maximum queued api requests to the registry.

maxRunning

integer

maxRunning sets the maximum in flight api requests to the registry.

maxWaitInQueue

string

maxWaitInQueue sets the maximum time a request can wait in the queue before being rejected.

claims

array

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container. This is an alpha field and requires enabling the DynamicResourceAllocation feature gate. This field is immutable. It can only be set for containers.

claims[]

object

ResourceClaim references one entry in PodSpec.ResourceClaims.

limits

integer-or-string

Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

requests

integer-or-string

Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

name

string

Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.

hostname

string

hostname for the route.

name

string

name of the route to be created.

secretName

string

secretName points to secret containing the certificates to be used by the route.

azure

object

azure represents configuration that uses Azure Blob Storage.

emptyDir

object

emptyDir represents ephemeral storage on the pod’s host node. WARNING: this storage cannot be used with more than 1 replica and is not suitable for production use. When the pod is removed from a node for any reason, the data in the emptyDir is deleted forever.

gcs

object

gcs represents configuration that uses Google Cloud Storage.

ibmcos

object

ibmcos represents configuration that uses IBM Cloud Object Storage.

managementState

string

managementState indicates if the operator manages the underlying storage unit. If Managed the operator will remove the storage when this operator gets Removed.

oss

object

Oss represents configuration that uses Alibaba Cloud Object Storage Service.

pvc

object

pvc represents configuration that uses a PersistentVolumeClaim.

s3

object

s3 represents configuration that uses Amazon Simple Storage Service.

swift

object

swift represents configuration that uses OpenStack Object Storage.

accountName

string

accountName defines the account to be used by the registry.

cloudName

string

cloudName is the name of the Azure cloud environment to be used by the registry. If empty, the operator will set it based on the infrastructure object.

container

string

container defines Azure’s container to be used by registry.

networkAccess

object

networkAccess defines the network access properties for the storage account. Defaults to type: External.

internal

object

internal defines the vnet and subnet names to configure a private endpoint and connect it to the storage account in order to make it private. when type: Internal and internal is unset, the image registry operator will discover vnet and subnet names, and generate a private endpoint name.

type

string

type is the network access level to be used for the storage account. type: Internal means the storage account will be private, type: External means the storage account will be publicly accessible. Internal storage accounts are only exposed within the cluster’s vnet. External storage accounts are publicly exposed on the internet. When type: Internal is used, a vnetName, subNetName and privateEndpointName may optionally be specified. If unspecificed, the image registry operator will discover vnet and subnet names, and generate a privateEndpointName. Defaults to "External".

networkResourceGroupName

string

networkResourceGroupName is the resource group name where the cluster’s vnet and subnet are. When omitted, the registry operator will use the cluster resource group (from in the infrastructure status). If you set a networkResourceGroupName on your install-config.yaml, that value will be used automatically (for clusters configured with publish:Internal). Note that both vnet and subnet must be in the same resource group. It must be between 1 and 90 characters in length and must consist only of alphanumeric characters, hyphens (-), periods (.) and underscores (_), and not end with a period.

privateEndpointName

string

privateEndpointName is the name of the private endpoint for the registry. When provided, the registry will use it as the name of the private endpoint it will create for the storage account. When omitted, the registry will generate one. It must be between 2 and 64 characters in length and must consist only of alphanumeric characters, hyphens (-), periods (.) and underscores (_). It must start with an alphanumeric character and end with an alphanumeric character or an underscore.

subnetName

string

subnetName is the name of the subnet the registry operates in. When omitted, the registry operator will discover and set this by using the kubernetes.io_cluster.<cluster-id> tag in the vnet resource, then using one of listed subnets. Advanced cluster network configurations that use network security groups to protect subnets should ensure the provided subnetName has access to Azure Storage service. It must be between 1 and 80 characters in length and must consist only of alphanumeric characters, hyphens (-), periods (.) and underscores (_).

vnetName

string

vnetName is the name of the vnet the registry operates in. When omitted, the registry operator will discover and set this by using the kubernetes.io_cluster.<cluster-id> tag in the vnet resource. This tag is set automatically by the installer. Commonly, this will be the same vnet as the cluster. Advanced cluster network configurations should ensure the provided vnetName is the vnet of the nodes where the image registry pods are running from. It must be between 2 and 64 characters in length and must consist only of alphanumeric characters, hyphens (-), periods (.) and underscores (_). It must start with an alphanumeric character and end with an alphanumeric character or an underscore.

bucket

string

bucket is the bucket name in which you want to store the registry’s data. Optional, will be generated if not provided.

keyID

string

keyID is the KMS key ID to use for encryption. Optional, buckets are encrypted by default on GCP. This allows for the use of a custom encryption key.

projectID

string

projectID is the Project ID of the GCP project that this bucket should be associated with.

region

string

region is the GCS location in which your bucket exists. Optional, will be set based on the installed GCS Region.

bucket

string

bucket is the bucket name in which you want to store the registry’s data. Optional, will be generated if not provided.

location

string

location is the IBM Cloud location in which your bucket exists. Optional, will be set based on the installed IBM Cloud location.

resourceGroupName

string

resourceGroupName is the name of the IBM Cloud resource group that this bucket and its service instance is associated with. Optional, will be set based on the installed IBM Cloud resource group.

resourceKeyCRN

string

resourceKeyCRN is the CRN of the IBM Cloud resource key that is created for the service instance. Commonly referred as a service credential and must contain HMAC type credentials. Optional, will be computed if not provided.

serviceInstanceCRN

string

serviceInstanceCRN is the CRN of the IBM Cloud Object Storage service instance that this bucket is associated with. Optional, will be computed if not provided.

bucket

string

Bucket is the bucket name in which you want to store the registry’s data. About Bucket naming, more details you can look at the [official documentation](https://www.alibabacloud.com/help/doc-detail/257087.htm) Empty value means no opinion and the platform chooses the a default, which is subject to change over time. Currently the default will be autogenerated in the form of <clusterid>-image-registry-<region>-<random string 27 chars>

encryption

object

Encryption specifies whether you would like your data encrypted on the server side. More details, you can look cat the [official documentation](https://www.alibabacloud.com/help/doc-detail/117914.htm)

endpointAccessibility

string

EndpointAccessibility specifies whether the registry use the OSS VPC internal endpoint Empty value means no opinion and the platform chooses the a default, which is subject to change over time. Currently the default is Internal.

region

string

Region is the Alibaba Cloud Region in which your bucket exists. For a list of regions, you can look at the [official documentation](https://www.alibabacloud.com/help/doc-detail/31837.html). Empty value means no opinion and the platform chooses the a default, which is subject to change over time. Currently the default will be based on the installed Alibaba Cloud Region.

kms

object

KMS (key management service) is an encryption type that holds the struct for KMS KeyID

method

string

Method defines the different encrytion modes available Empty value means no opinion and the platform chooses the a default, which is subject to change over time. Currently the default is AES256.

keyID

string

KeyID holds the KMS encryption key ID

claim

string

claim defines the Persisent Volume Claim’s name to be used.

bucket

string

bucket is the bucket name in which you want to store the registry’s data. Optional, will be generated if not provided.