ClusterCSIDriver [operator.openshift.io/v1]

driverConfig

object

driverConfig can be used to specify platform specific driver configuration. When omitted, this means no opinion and the platform is left to choose reasonable defaults. These defaults are subject to change over time.

logLevel

string

logLevel is an intent based logging for an overall component. It does not give fine grained control, but it is a simple way to manage coarse grained logging choices that operators have to interpret for their operands.

Valid values are: "Normal", "Debug", "Trace", "TraceAll". Defaults to "Normal".

managementState

string

managementState indicates whether and how the operator should manage the component

observedConfig

``

observedConfig holds a sparse config that controller has observed from the cluster state. It exists in spec because it is an input to the level for the operator

operatorLogLevel

string

operatorLogLevel is an intent based logging for the operator itself. It does not give fine grained control, but it is a simple way to manage coarse grained logging choices that operators have to interpret for themselves.

Valid values are: "Normal", "Debug", "Trace", "TraceAll". Defaults to "Normal".

storageClassState

string

storageClassState determines if CSI operator should create and manage storage classes. If this field value is empty or Managed - CSI operator will continuously reconcile storage class and create if necessary. If this field value is Unmanaged - CSI operator will not reconcile any previously created storage class. If this field value is Removed - CSI operator will delete the storage class it created previously. When omitted, this means the user has no opinion and the platform chooses a reasonable default, which is subject to change over time. The current default behaviour is Managed.

unsupportedConfigOverrides

``

unsupportedConfigOverrides overrides the final configuration that was computed by the operator. Red Hat does not support the use of this field. Misuse of this field could lead to unexpected behavior or conflict with other configuration options. Seek guidance from the Red Hat support before using this field. Use of this property blocks cluster upgrades, it must be removed before upgrading your cluster.

aws

object

aws is used to configure the AWS CSI driver.

azure

object

azure is used to configure the Azure CSI driver.

driverType

string

driverType indicates type of CSI driver for which the driverConfig is being applied to. Valid values are: AWS, Azure, GCP, IBMCloud, vSphere, SecretsStore and omitted. Consumers should treat unknown values as a NO-OP.

gcp

object

gcp is used to configure the GCP CSI driver.

ibmcloud

object

ibmcloud is used to configure the IBM Cloud CSI driver.

secretsStore

object

secretsStore is used to configure the Secrets Store CSI driver.

vSphere

object

vSphere is used to configure the vsphere CSI driver.

efsVolumeMetrics

object

efsVolumeMetrics sets the configuration for collecting metrics from EFS volumes used by the EFS CSI Driver.

kmsKeyARN

string

kmsKeyARN sets the cluster default storage class to encrypt volumes with a user-defined KMS key, rather than the default KMS key used by AWS. The value may be either the ARN or Alias ARN of a KMS key.

The ARN must follow the format: arn:<partition>:kms:<region>:<account-id>:(key|alias)/<key-id-or-alias>, where: <partition> is the AWS partition (aws, aws-cn, aws-us-gov, aws-iso, aws-iso-b, aws-iso-e, aws-iso-f, or aws-eusc), <region> is the AWS region, <account-id> is a 12-digit numeric identifier for the AWS account, <key-id-or-alias> is the KMS key ID or alias name.

recursiveWalk

object

recursiveWalk provides additional configuration for collecting volume metrics in the AWS EFS CSI Driver when the state is set to RecursiveWalk.

state

string

state defines the state of metric collection in the AWS EFS CSI Driver. This field is required and must be set to one of the following values: Disabled or RecursiveWalk. Disabled means no metrics collection will be performed. This is the default value. RecursiveWalk means the AWS EFS CSI Driver will recursively scan volumes to collect metrics. This process may result in high CPU and memory usage, depending on the volume size.

fsRateLimit

integer

fsRateLimit defines the rate limit, in goroutines per file system, for processing volume metrics. When omitted, this means no opinion and the platform is left to choose a reasonable default, which is subject to change over time. The current default is 5. The valid range is from 1 to 100 goroutines.

refreshPeriodMinutes

integer

refreshPeriodMinutes specifies the frequency, in minutes, at which volume metrics are refreshed. When omitted, this means no opinion and the platform is left to choose a reasonable default, which is subject to change over time. The current default is 240. The valid range is from 1 to 43200 minutes (30 days).

diskEncryptionSet

object

diskEncryptionSet sets the cluster default storage class to encrypt volumes with a customer-managed encryption set, rather than the default platform-managed keys.

name

string

name is the name of the disk encryption set that will be set on the default storage class. The value should consist of only alphanumberic characters, underscores (_), hyphens, and be at most 80 characters in length.

resourceGroup

string

resourceGroup defines the Azure resource group that contains the disk encryption set. The value should consist of only alphanumberic characters, underscores (_), parentheses, hyphens and periods. The value should not end in a period and be at most 90 characters in length.

subscriptionID

string

subscriptionID defines the Azure subscription that contains the disk encryption set. The value should meet the following conditions: 1. It should be a 128-bit number. 2. It should be 36 characters (32 hexadecimal characters and 4 hyphens) long. 3. It should be displayed in five groups separated by hyphens (-). 4. The first group should be 8 characters long. 5. The second, third, and fourth groups should be 4 characters long. 6. The fifth group should be 12 characters long. An Example SubscrionID: f2007bbf-f802-4a47-9336-cf7c6b89b378

kmsKey

object

kmsKey sets the cluster default storage class to encrypt volumes with customer-supplied encryption keys, rather than the default keys managed by GCP.

keyRing

string

keyRing is the name of the KMS Key Ring which the KMS Key belongs to. The value should correspond to an existing KMS key ring and should consist of only alphanumeric characters, hyphens (-) and underscores (_), and be at most 63 characters in length.

location

string

location is the GCP location in which the Key Ring exists. The value must match an existing GCP location, or "global". Defaults to global, if not set.

name

string

name is the name of the customer-managed encryption key to be used for disk encryption. The value should correspond to an existing KMS key and should consist of only alphanumeric characters, hyphens (-) and underscores (_), and be at most 63 characters in length.

projectID

string

projectID is the ID of the Project in which the KMS Key Ring exists. It must be 6 to 30 lowercase letters, digits, or hyphens. It must start with a letter. Trailing hyphens are prohibited.

encryptionKeyCRN

string

encryptionKeyCRN is the IBM Cloud CRN of the customer-managed root key to use for disk encryption of volumes for the default storage classes.

secretRotation

object

secretRotation controls automatic secret rotation behavior. When omitted, secret rotation is enabled with a default poll interval of 2 minutes.

tokenRequests

object

tokenRequests controls service account token configuration for workload identity federation (WIF) with cloud providers. When omitted, the operator preserves any existing tokenRequests already configured on the CSIDriver object without modification.

custom

object

custom holds the custom rotation configuration. Only valid when type is "Custom".

type

string

type determines the secret rotation behavior. When "None", secret rotation is disabled and secrets are only fetched at initial pod mount time. When "Custom", secret rotation is enabled with the configuration specified in the custom field.

minimumRefreshAge

integer

minimumRefreshAge is the minimum time in seconds between secret rotation attempts. Each time kubelet calls NodePublishVolume, the driver checks whether this interval has elapsed since the last successful provider call. If it has, the driver contacts the secret provider to fetch the latest secret values and updates the mounted volume. Setting this value below the kubelet syncFrequency (default: 1 minute) has no additional effect on the actual rotation cadence. Must be at least 1 second and no more than 31560000 seconds (~1 year). When omitted, this means no opinion and the platform is left to choose a reasonable default, which is subject to change over time.

managed

object

managed holds configuration for operator-managed tokenRequests. Only valid when type is "Managed".

type

string

type determines how the operator manages tokenRequests on the CSIDriver object. When "Unmanaged", existing tokenRequests on the CSIDriver are preserved and the managed field is not used. When "Managed", the operator sets tokenRequests from the audiences specified in the managed field, replacing any previously configured values. Once set to "Managed", type cannot be reverted back to "Unmanaged".

audiences

array

audiences specifies service account token audiences that kubelet will provide to the CSI driver during NodePublishVolume calls. These tokens enable workload identity federation (WIF) with cloud providers such as AWS, Azure, and GCP. When empty, the operator clears all tokenRequests from the CSIDriver object.

audiences[]

object

SecretsStoreTokenRequest specifies a service account token audience configuration for workload identity federation (WIF) with the Secrets Store CSI driver.

audience

string

audience is the intended audience of the service account token. An empty string means the issued token will use the kube-apiserver’s default APIAudiences.

expirationSeconds

integer

expirationSeconds is the requested duration of validity of the service account token. The token issuer may return a token with a different validity duration. When omitted, the token expiration is determined by the kube-apiserver. Must be at least 600 seconds (10 minutes) and no more than 315360000 seconds (~10 years).

globalMaxSnapshotsPerBlockVolume

integer

globalMaxSnapshotsPerBlockVolume is a global configuration parameter that applies to volumes on all kinds of datastores. If omitted, the platform chooses a default, which is subject to change over time, currently that default is 3. Snapshots can not be disabled using this parameter. Increasing number of snapshots above 3 can have negative impact on performance, for more details see: https://kb.vmware.com/s/article/1025279 Volume snapshot documentation: https://docs.vmware.com/en/VMware-vSphere-Container-Storage-Plug-in/3.0/vmware-vsphere-csp-getting-started/GUID-E0B41C69-7EEB-450F-A73D-5FD2FF39E891.html

granularMaxSnapshotsPerBlockVolumeInVSAN

integer

granularMaxSnapshotsPerBlockVolumeInVSAN is a granular configuration parameter on vSAN datastore only. It overrides GlobalMaxSnapshotsPerBlockVolume if set, while it falls back to the global constraint if unset. Snapshots for VSAN can not be disabled using this parameter.

granularMaxSnapshotsPerBlockVolumeInVVOL

integer

granularMaxSnapshotsPerBlockVolumeInVVOL is a granular configuration parameter on Virtual Volumes datastore only. It overrides GlobalMaxSnapshotsPerBlockVolume if set, while it falls back to the global constraint if unset. Snapshots for VVOL can not be disabled using this parameter.

topologyCategories

array (string)

topologyCategories indicates tag categories with which vcenter resources such as hostcluster or datacenter were tagged with. If cluster Infrastructure object has a topology, values specified in Infrastructure object will be used and modifications to topologyCategories will be rejected.

conditions

array

conditions is a list of conditions and their status

conditions[]

object

OperatorCondition is just the standard condition fields.

generations

array

generations are used to determine when an item needs to be reconciled or has changed in a way that needs a reaction.

generations[]

object

GenerationStatus keeps track of the generation for a given resource so that decisions about forced updates can be made.

latestAvailableRevision

integer

latestAvailableRevision is the deploymentID of the most recent deployment

observedGeneration

integer

observedGeneration is the last generation change you’ve dealt with

readyReplicas

integer

readyReplicas indicates how many replicas are ready and at the desired state

version

string

version is the level this availability applies to

lastTransitionTime

string

lastTransitionTime is the last time the condition transitioned from one status to another. This should be when the underlying condition changed. If that is not known, then using the time when the API field changed is acceptable.

message

string

reason

string

status

string

status of the condition, one of True, False, Unknown.

type

string

type of condition in CamelCase or in foo.example.com/CamelCase.

group

string

group is the group of the thing you’re tracking

hash

string

hash is an optional field set for resources without generation that are content sensitive like secrets and configmaps

lastGeneration

integer

lastGeneration is the last generation of the workload controller involved

name

string

name is the name of the thing you’re tracking

namespace

string

namespace is where the thing you’re tracking is

resource

string

resource is the resource type of the thing you’re tracking

200 - OK

Status schema

401 - Unauthorized

Empty

200 - OK

ClusterCSIDriverList schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

ClusterCSIDriver schema

200 - OK

ClusterCSIDriver schema

201 - Created

ClusterCSIDriver schema

202 - Accepted

ClusterCSIDriver schema

401 - Unauthorized

Empty

name

string

name of the ClusterCSIDriver

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

200 - OK

ClusterCSIDriver schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

200 - OK

ClusterCSIDriver schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

ClusterCSIDriver schema

200 - OK

ClusterCSIDriver schema

201 - Created

ClusterCSIDriver schema

401 - Unauthorized

Empty

name

string

name of the ClusterCSIDriver

200 - OK

ClusterCSIDriver schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

200 - OK

ClusterCSIDriver schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

ClusterCSIDriver schema

200 - OK

ClusterCSIDriver schema

201 - Created

ClusterCSIDriver schema

401 - Unauthorized

Empty