1. Documentation
×

About user-defined networks

UserDefinedNetwork is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

Before the implementation of user-defined networks (UDN), the OVN-Kubernetes CNI plugin only supported a Layer 3 topology on the primary, or main, network that all pods are attached to. This allowed for network models where all pods in the cluster were part of the same global Layer 3 network, but restricted the ability to customize primary network configurations.

User-defined networks provide cluster administrators and users with highly customizable network configuration options for both primary and secondary network types. With UDNs, administrators can create tailored network topologies with enhanced isolation, IP address management for workloads, and advanced networking features. Supporting both Layer 2 and Layer 3 topology types, UDNs enable a wide range of network architectures and topologies, enhancing network flexibility, security, and performance.

  • Support for the Localnet topology on both primary and secondary networks will be added in a future version of OKD.

Unlike NADs, which are only namespaced scope, UDNs offer administrators the ability to create and define additional networks spanning multiple namespaces at the cluster level by leveraging the ClusterUserDefinedNetwork custom resource (CR). UDNs also offer both administrators and users the ability to define additional networks at the namespace level with the UserDefinedNetwork CR.

The following sections further emphasize the benefits and limitations of user-defined networks, the best practices when creating a ClusterUserDefinedNetwork or UserDefinedNetwork custom resource, how to create the custom resource, and additional configuration details that might be relevant to your deployment.

Benefits of a user-defined network

User-defined networks provide the following benefits:

  1. Enhanced network isolation for security

    • Tenant isolation: Namespaces can have their own isolated primary network, similar to how tenants are isolated in OpenStack. This improves security by reducing the risk of cross-tenant traffic.

  2. Network flexibility

    • Layer 2 and layer 3 support: Cluster administrators can configure primary networks as layer 2 or layer 3 network types. This provides the flexibility of a secondary network to the primary network.

  3. Simplified network management

    • Reduced network configuration complexity: With user-defined networks, the need for complex network policies are eliminated because isolation can be achieved by grouping workloads in different networks.

  4. Advanced capabilities

    • Consistent and selectable IP addressing: Users can specify and reuse IP subnets across different namespaces and clusters, providing a consistent networking environment.

    • Support for multiple networks: The user-defined networking feature allows administrators to connect multiple namespaces to a single network, or to create distinct networks for different sets of namespaces.

  5. Simplification of application migration from OpenStack

    • Network parity: With user-defined networking, the migration of applications from OpenStack to OKD is simplified by providing similar network isolation and configuration options.

Developers and administrators can create a user-defined network that is namespace scoped using the custom resource. An overview of the process is: create a namespace, create and configure the custom resource, create pods in the namespace.

Limitations for UserDefinedNetwork custom resource

While user-defined networks (UDN) offer highly customizable network configuration options, there are limitations that cluster administrators and developers should be aware of when implementing and managing these networks. Consider the following limitations before implementing a user-defined network.

  • DNS limitations:

    • DNS lookups for pods resolve to the pod’s IP address on the cluster default network. Even if a pod is part of a user-defined network, DNS lookups will not resolve to the pod’s IP address on that user-defined network. However, DNS lookups for services and external entities will function as expected.

    • When a pod is assigned to a primary UDN, it can access the Kubernetes API (KAPI) and DNS services on the cluster’s default network.

  • Initial network assignment: You must create the namespace and network before creating pods. Assigning a namespace with pods to a new network or creating a UDN in an existing namespace will not be accepted by OVN-Kubernetes.

  • Health check limitations: Kubelet health checks are performed by the cluster default network, which does not confirm the network connectivity of the primary interface on the pod. Consequently, scenarios where a pod appears healthy by the default network, but has broken connectivity on the primary interface, are possible with user-defined networks.

  • Network policy limitations: Network policies that enable traffic between namespaces connected to different user-defined primary networks are not effective. These traffic policies do not take effect because there is no connectivity between these isolated networks.

Best practices for UserDefinedNetwork

Before setting up a UserDefinedNetwork (UDN) resource, users should consider the following information:

  • openshift-* namespaces should not be used to set up a UDN.

  • 2 masquerade IP addresses are required for user defined networks. You must reconfigure your masquerade subnet to be large enough to hold the required number of networks.

    • For OKD 4.17 and later, clusters use 169.254.0.0/17 for IPv4 and fd69::/112 for IPv6 as the default masquerade subnet. These ranges should be avoided by users. For updated clusters, there is no change to the default masquerade subnet.

    • Changing the cluster’s masquerade subnet is unsupported after a user-defined network has been configured for a project. Attempting to modify the masquerade subnet after a UDN has been set up can disrupt the network connectivity and cause configuration issues.

  • Ensure tenants are using the UserDefinedNetwork resource and not the NetworkAttachmentDefinition (NAD) resource. This can create security risks between tenants.

  • When creating network segmentation, you should only use the NAD resource if user-defined network segmentation cannot be completed using the UDN resource.

  • The cluster subnet and services CIDR for a UDN cannot overlap with the default cluster subnet CIDR. OVN-Kubernetes network plugin uses 100.64.0.0/16 as the default network’s join subnet, you must not use that value to configure a UDN joinSubnets field. If the default address values are used anywhere in the cluster’s network you must override it by setting the joinSubnets field. For more information, see "Additional configuration details for a UserDefinedNetworks CR".

Creating a UserDefinedNetwork custom resource

The following procedure creates a user-defined network that is namespace scoped. Based upon your use case, create your request using either the my-layer-two-udn.yaml example for a Layer2 topology type or the my-layer-three-udn.yaml example for a Layer3 topology type.

Procedure

  1. Create a request for either a Layer2 or Layer3 topology type user-defined network:

    1. Create a YAML file, such as my-layer-two-udn.yaml, to define your request for a Layer2 topology as in the following example:

      apiVersion: k8s.ovn.org/v1
kind: UserDefinedNetwork
metadata:
  name: udn-1 (1)
  namespace: <some_custom_namespace>
spec:
  topology: Layer2 (2)
  layer2: (3)
    role: Primary (4)
    subnets:
      - "10.0.0.0/24"
      - "2001:db8::/60" (5)
      1 Name of your UserDefinedNetwork resource. This should not be default or duplicate any global namespaces created by the Cluster Network Operator (CNO).
      2 The topology field describes the network configuration; accepted values are Layer2 and Layer3. Specifying a Layer2 topology type creates one logical switch that is shared by all nodes.
      3 This field specifies the topology configuration. It can be layer2 or layer3.
      4 Specifies Primary or Secondary. Primary is the only role specification supported in 4.17.
      5 For Layer2 topology types the following specifies config details for the subnet field:

      • The subnets field is optional.

      • The subnets field is of type string and accepts standard CIDR formats for both IPv4 and IPv6.

      • The subnets field accepts one or two items. For two items, they must be of a different family. For example, subnets values of 10.100.0.0/16 and 2001:db8::/64.

      • Layer2 subnets can be omitted. If omitted, users must configure IP addresses for the pods. As a consequence, port security only prevents MAC spoofing.

      • The Layer2 subnets field is mandatory when the ipamLifecycle field is specified.

    2. Create a YAML file, such as my-layer-three-udn.yaml, to define your request for a Layer3 topology as in the following example:

      apiVersion: k8s.ovn.org/v1
kind: UserDefinedNetwork
metadata:
  name: udn-2-primary (1)
  namespace: <some_custom_namespace>
spec:
  topology: Layer3 (2)
  layer3: (3)
    role: Primary (4)
    subnets: (5)
      - cidr: 10.150.0.0/16
        hostSubnet: 24
      - cidr: 2001:db8::/60
        hostSubnet: 64
      1 Name of your UserDefinedNetwork resource. This should not be default or duplicate any global namespaces created by the Cluster Network Operator (CNO).
      2 The topology field describes the network configuration; accepted values are Layer2 and Layer3. Specifying a Layer3 topology type creates a layer 2 segment per node, each with a different subnet. Layer 3 routing is used to interconnect node subnets.
      3 This field specifies the topology configuration. Valid values are layer2 or layer3.
      4 Specifies a Primary or Secondary role. Primary is the only role specification supported in 4.17 .
      5 For Layer3 topology types the following specifies config details for the subnet field:

      • The subnets field is mandatory.

      • The type for the subnets field is cidr and hostSubnet:

        • cidr is the cluster subnet and accepts a string value.

        • hostSubnet specifies the nodes subnet prefix that the cluster subnet is split to.

        • For IPv6, only a /64 length is supported for hostSubnet.

  2. Apply your request by running the following command:

    $ oc apply -f <my_layer_two_udn.yaml>

    Where <my_layer_two_udn.yaml> is the name of your Layer2 or Layer3 configuration file.

  3. Verify that your request is successful by running the following command:

    $ oc get userdefinednetworks udn-1 -n <some_custom_namespace> -o yaml

    Where some_custom_namespace is the namespace you created for your user-defined network.

    Example output
    apiVersion: k8s.ovn.org/v1
kind: UserDefinedNetwork
metadata:
  creationTimestamp: "2024-08-28T17:18:47Z"
  finalizers:
  - k8s.ovn.org/user-defined-network-protection
  generation: 1
  name: udn-1
  namespace: some-custom-namespace
  resourceVersion: "53313"
  uid: f483626d-6846-48a1-b88e-6bbeb8bcde8c
spec:
  layer2:
    role: Primary
    subnets:
    - 10.0.0.0/24
    - 2001:db8::/60
  topology: Layer2
status:
  conditions:
  - lastTransitionTime: "2024-08-28T17:18:47Z"
    message: NetworkAttachmentDefinition has been created
    reason: NetworkAttachmentDefinitionReady
    status: "True"
    type: NetworkReady

Additional configuration details for a UserDefinedNetworks CR

The following table explains additional configurations for UDN that are optional. It is not recommended to set these fields without explicit need and understanding of OVN-Kubernetes network topology.

Table 1. UserDefinedNetworks optional configurations
Field Type Description

spec.joinSubnets

object

When omitted, the platform sets default values for the joinSubnets field of 100.65.0.0/16 for IPv4 and fd99::/64 for IPv6. If the default address values are used anywhere in the cluster’s network you must override it by setting the joinSubnets field. If you choose to set this field, ensure it does not conflict with other subnets in the cluster such as the cluster subnet, the default network cluster subnet, and the masquerade subnet.

The joinSubnets field configures the routing between different segments within a user-defined network. Dual-stack clusters can set 2 subnets, one for each IP family; otherwise, only 1 subnet is allowed. This field is only allowed for the Primary network.

spec.IPAMLifecycle

object

The IPAMLifecycle field configures the IP address management system (IPAM). You might use this field for virtual workloads to ensure persistent IP addresses. This field is allowed when topology is layer2. The subnets field must be specified when this field is specified. Setting a value of Persistent ensures that your virtual workloads have persistent IP addresses across reboots and migration. These are assigned by the container network interface (CNI) and used by OVN-Kubernetes to program pod IP addresses. You must not change this for pod annotations.

spec.layer2.mtu and spec.layer3.mtu

integer

The maximum transmission units (MTU). The default value is 1400. The boundary for IPv4 is 574, and for IPv6 it is 1280.