Soon, all Red Hat OpenShift documentation will only be available on docs.redhat.com, the official location of all Red Hat product documentation. Get familiar with the updated experience today!
  1. Documentation
×

Troubleshooting AdminNetworkPolicy

Checking creation of ANP

To check that your AdminNetworkPolicy (ANP) and BaselineAdminNetworkPolicy (BANP) are created correctly, check the status outputs of the following commands: oc describe anp or oc describe banp.

A good status indicates OVN DB plumbing was successful and the SetupSucceeded.

Example ANP with a good status 
...
Conditions:
Last Transition Time:  2024-06-08T20:29:00Z
Message:               Setting up OVN DB plumbing was successful
Reason:                SetupSucceeded
Status:                True
Type:                  Ready-In-Zone-ovn-control-plane Last Transition Time:  2024-06-08T20:29:00Z
Message:               Setting up OVN DB plumbing was successful
Reason:                SetupSucceeded
Status:                True
Type:                  Ready-In-Zone-ovn-worker
Last Transition Time:  2024-06-08T20:29:00Z
Message:               Setting up OVN DB plumbing was successful
Reason:                SetupSucceeded
Status:                True
Type:                  Ready-In-Zone-ovn-worker2
...

If plumbing is unsuccessful, an error is reported from the respective zone controller.

Example of an ANP with a bad status and error message 
...
Status:
  Conditions:
    Last Transition Time:  2024-06-25T12:47:44Z
    Message:               error attempting to add ANP cluster-control with priority 600 because, OVNK only supports priority ranges 0-99
    Reason:                SetupFailed
    Status:                False
    Type:                  Ready-In-Zone-example-worker-1.example.example-org.net
    Last Transition Time:  2024-06-25T12:47:45Z
    Message:               error attempting to add ANP cluster-control with priority 600 because, OVNK only supports priority ranges 0-99
    Reason:                SetupFailed
    Status:                False
    Type:                  Ready-In-Zone-example-worker-0.example.example-org.net
    Last Transition Time:  2024-06-25T12:47:44Z
    Message:               error attempting to add ANP cluster-control with priority 600 because, OVNK only supports priority ranges 0-99
    Reason:                SetupFailed
    Status:                False
    Type:                  Ready-In-Zone-example-ctlplane-1.example.example-org.net
    Last Transition Time:  2024-06-25T12:47:44Z
    Message:               error attempting to add ANP cluster-control with priority 600 because, OVNK only supports priority ranges 0-99
    Reason:                SetupFailed
    Status:                False
    Type:                  Ready-In-Zone-example-ctlplane-2.example.example-org.net
    Last Transition Time:  2024-06-25T12:47:44Z
    Message:               error attempting to add ANP cluster-control with priority 600 because, OVNK only supports priority ranges 0-99
    Reason:                SetupFailed
    Status:                False
    Type:                  Ready-In-Zone-example-ctlplane-0.example.example-org.net
    ```

See the following section for nbctl commands to help troubleshoot unsuccessful policies.

Using nbctl commands for ANP and BANP

To troubleshoot an unsuccessful setup, start by looking at OVN Northbound database (nbdb) objects including ACL, AdressSet, and Port_Group. To view the nbdb, you need to be inside the pod on that node to view the objects in that node’s database.

Prerequisites

  • Access to the cluster as a user with the cluster-admin role.

  • The OpenShift CLI (oc) installed.

To run ovn nbctl commands in a cluster, you must open a remote shell into the `nbdb`on the relevant node.

The following policy was used to generate outputs.

AdminNetworkPolicy used to generate outputs 
apiVersion: policy.networking.k8s.io/v1alpha1
kind: AdminNetworkPolicy
metadata:
  name: cluster-control
spec:
  priority: 34
  subject:
    namespaces:
      matchLabels:
        anp: cluster-control-anp # Only namespaces with this label have this ANP
  ingress:
  - name: "allow-from-ingress-router" # rule0
    action: "Allow"
    from:
    - namespaces:
        matchLabels:
          policy-group.network.openshift.io/ingress: ""
  - name: "allow-from-monitoring" # rule1
    action: "Allow"
    from:
    - namespaces:
        matchLabels:
          kubernetes.io/metadata.name: openshift-monitoring
    ports:
    - portNumber:
        protocol: TCP
        port: 7564
    - namedPort: "scrape"
  - name: "allow-from-open-tenants" # rule2
    action: "Allow"
    from:
    - namespaces: # open tenants
        matchLabels:
          tenant: open
  - name: "pass-from-restricted-tenants" # rule3
    action: "Pass"
    from:
    - namespaces: # restricted tenants
        matchLabels:
          tenant: restricted
  - name: "default-deny" # rule4
    action: "Deny"
    from:
    - namespaces: {} # Use the empty selector with caution because it also selects OpenShift namespaces as well.
  egress:
  - name: "allow-to-dns" # rule0
    action: "Allow"
    to:
    - pods:
        namespaceSelector:
          matchlabels:
            kubernetes.io/metadata.name: openshift-dns
        podSelector:
          matchlabels:
            app: dns
    ports:
    - portNumber:
        protocol: UDP
        port: 5353
  - name: "allow-to-kapi-server" # rule1
    action: "Allow"
    to:
    - nodes:
        matchExpressions:
        - key: node-role.kubernetes.io/control-plane
          operator: Exists
    ports:
    - portNumber:
        protocol: TCP
        port: 6443
  - name: "allow-to-splunk" # rule2
    action: "Allow"
    to:
    - namespaces:
        matchlabels:
          tenant: splunk
    ports:
    - portNumber:
        protocol: TCP
        port: 8991
    - portNumber:
        protocol: TCP
        port: 8992
  - name: "allow-to-open-tenants-and-intranet-and-worker-nodes" # rule3
    action: "Allow"
    to:
    - nodes: # worker-nodes
        matchExpressions:
        - key: node-role.kubernetes.io/worker
          operator: Exists
    - networks: # intranet
      - 172.29.0.0/30
      - 10.0.54.0/19
      - 10.0.56.38/32
      - 10.0.69.0/24
    - namespaces: # open tenants
        matchLabels:
          tenant: open
  - name: "pass-to-restricted-tenants" # rule4
    action: "Pass"
    to:
    - namespaces: # restricted tenants
        matchLabels:
          tenant: restricted
  - name: "default-deny"
    action: "Deny"
    to:
    - networks:
      - 0.0.0.0/0
Procedure

  1. List pods with node information by running the following command:

    $ oc get pods -n openshift-ovn-kubernetes -owide
    Example output
    NAME                                     READY   STATUS    RESTARTS   AGE   IP           NODE                                       NOMINATED NODE   READINESS GATES
ovnkube-control-plane-5c95487779-8k9fd   2/2     Running   0          34m   10.0.0.5     ci-ln-0tv5gg2-72292-6sjw5-master-0         <none>           <none>
ovnkube-control-plane-5c95487779-v2xn8   2/2     Running   0          34m   10.0.0.3     ci-ln-0tv5gg2-72292-6sjw5-master-1         <none>           <none>
ovnkube-node-524dt                       8/8     Running   0          33m   10.0.0.4     ci-ln-0tv5gg2-72292-6sjw5-master-2         <none>           <none>
ovnkube-node-gbwr9                       8/8     Running   0          24m   10.0.128.4   ci-ln-0tv5gg2-72292-6sjw5-worker-c-s9gqt   <none>           <none>
ovnkube-node-h4fpx                       8/8     Running   0          33m   10.0.0.5     ci-ln-0tv5gg2-72292-6sjw5-master-0         <none>           <none>
ovnkube-node-j4hzw                       8/8     Running   0          24m   10.0.128.2   ci-ln-0tv5gg2-72292-6sjw5-worker-a-hzbh5   <none>           <none>
ovnkube-node-wdhgv                       8/8     Running   0          33m   10.0.0.3     ci-ln-0tv5gg2-72292-6sjw5-master-1         <none>           <none>
ovnkube-node-wfncn                       8/8     Running   0          24m   10.0.128.3   ci-ln-0tv5gg2-72292-6sjw5-worker-b-5bb7f   <none>           <none>

  2. Navigate into a pod to look at the northbound database by running the following command:

    $ oc rsh -c nbdb -n openshift-ovn-kubernetes ovnkube-node-524dt

  3. Run the following command to look at the ACLs nbdb:

    $ ovn-nbctl find ACL 'external_ids{>=}{"k8s.ovn.org/owner-type"=AdminNetworkPolicy,"k8s.ovn.org/name"=cluster-control}'
    Where
    cluster-control

    Specifies the name of the AdminNetworkPolicy you are troubleshooting.

    AdminNetworkPolicy

    Specifies the type: AdminNetworkPolicy or BaselineAdminNetworkPolicy.

    Example output for ACLs 
    _uuid               : 0d5e4722-b608-4bb1-b625-23c323cc9926
action              : allow-related
direction           : to-lport
external_ids        : {direction=Ingress, gress-index="2", "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Ingress:2:None", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy, port-policy-protocol=None}
label               : 0
log                 : false
match               : "outport == @a14645450421485494999 && ((ip4.src == $a13730899355151937870))"
meter               : acl-logging
name                : "ANP:cluster-control:Ingress:2"
options             : {}
priority            : 26598
severity            : []
tier                : 1

_uuid               : b7be6472-df67-439c-8c9c-f55929f0a6e0
action              : drop
direction           : from-lport
external_ids        : {direction=Egress, gress-index="5", "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Egress:5:None", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy, port-policy-protocol=None}
label               : 0
log                 : false
match               : "inport == @a14645450421485494999 && ((ip4.dst == $a11452480169090787059))"
meter               : acl-logging
name                : "ANP:cluster-control:Egress:5"
options             : {apply-after-lb="true"}
priority            : 26595
severity            : []
tier                : 1

_uuid               : 5a6e5bb4-36eb-4209-b8bc-c611983d4624
action              : pass
direction           : to-lport
external_ids        : {direction=Ingress, gress-index="3", "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Ingress:3:None", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy, port-policy-protocol=None}
label               : 0
log                 : false
match               : "outport == @a14645450421485494999 && ((ip4.src == $a764182844364804195))"
meter               : acl-logging
name                : "ANP:cluster-control:Ingress:3"
options             : {}
priority            : 26597
severity            : []
tier                : 1

_uuid               : 04f20275-c410-405c-a923-0e677f767889
action              : pass
direction           : from-lport
external_ids        : {direction=Egress, gress-index="4", "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Egress:4:None", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy, port-policy-protocol=None}
label               : 0
log                 : false
match               : "inport == @a14645450421485494999 && ((ip4.dst == $a5972452606168369118))"
meter               : acl-logging
name                : "ANP:cluster-control:Egress:4"
options             : {apply-after-lb="true"}
priority            : 26596
severity            : []
tier                : 1

_uuid               : 4b5d836a-e0a3-4088-825e-f9f0ca58e538
action              : drop
direction           : to-lport
external_ids        : {direction=Ingress, gress-index="4", "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Ingress:4:None", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy, port-policy-protocol=None}
label               : 0
log                 : false
match               : "outport == @a14645450421485494999 && ((ip4.src == $a13814616246365836720))"
meter               : acl-logging
name                : "ANP:cluster-control:Ingress:4"
options             : {}
priority            : 26596
severity            : []
tier                : 1

_uuid               : 5d09957d-d2cc-4f5a-9ddd-b97d9d772023
action              : allow-related
direction           : from-lport
external_ids        : {direction=Egress, gress-index="2", "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Egress:2:tcp", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy, port-policy-protocol=tcp}
label               : 0
log                 : false
match               : "inport == @a14645450421485494999 && ((ip4.dst == $a18396736153283155648)) && tcp && tcp.dst=={8991,8992}"
meter               : acl-logging
name                : "ANP:cluster-control:Egress:2"
options             : {apply-after-lb="true"}
priority            : 26598
severity            : []
tier                : 1

_uuid               : 1a68a5ed-e7f9-47d0-b55c-89184d97e81a
action              : allow-related
direction           : from-lport
external_ids        : {direction=Egress, gress-index="1", "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Egress:1:tcp", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy, port-policy-protocol=tcp}
label               : 0
log                 : false
match               : "inport == @a14645450421485494999 && ((ip4.dst == $a10706246167277696183)) && tcp && tcp.dst==6443"
meter               : acl-logging
name                : "ANP:cluster-control:Egress:1"
options             : {apply-after-lb="true"}
priority            : 26599
severity            : []
tier                : 1

_uuid               : aa1a224d-7960-4952-bdfb-35246bafbac8
action              : allow-related
direction           : to-lport
external_ids        : {direction=Ingress, gress-index="1", "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Ingress:1:tcp", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy, port-policy-protocol=tcp}
label               : 0
log                 : false
match               : "outport == @a14645450421485494999 && ((ip4.src == $a6786643370959569281)) && tcp && tcp.dst==7564"
meter               : acl-logging
name                : "ANP:cluster-control:Ingress:1"
options             : {}
priority            : 26599
severity            : []
tier                : 1

_uuid               : 1a27d30e-3f96-4915-8ddd-ade7f22c117b
action              : allow-related
direction           : from-lport
external_ids        : {direction=Egress, gress-index="3", "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Egress:3:None", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy, port-policy-protocol=None}
label               : 0
log                 : false
match               : "inport == @a14645450421485494999 && ((ip4.dst == $a10622494091691694581))"
meter               : acl-logging
name                : "ANP:cluster-control:Egress:3"
options             : {apply-after-lb="true"}
priority            : 26597
severity            : []
tier                : 1

_uuid               : b23a087f-08f8-4225-8c27-4a9a9ee0c407
action              : allow-related
direction           : from-lport
external_ids        : {direction=Egress, gress-index="0", "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Egress:0:udp", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy, port-policy-protocol=udp}
label               : 0
log                 : false
match               : "inport == @a14645450421485494999 && ((ip4.dst == $a13517855690389298082)) && udp && udp.dst==5353"
meter               : acl-logging
name                : "ANP:cluster-control:Egress:0"
options             : {apply-after-lb="true"}
priority            : 26600
severity            : []
tier                : 1

_uuid               : d14ed5cf-2e06-496e-8cae-6b76d5dd5ccd
action              : allow-related
direction           : to-lport
external_ids        : {direction=Ingress, gress-index="0", "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Ingress:0:None", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy, port-policy-protocol=None}
label               : 0
log                 : false
match               : "outport == @a14645450421485494999 && ((ip4.src == $a14545668191619617708))"
meter               : acl-logging
name                : "ANP:cluster-control:Ingress:0"
options             : {}
priority            : 26600
severity            : []
tier                : 1

    The outputs for ingress and egress show you the logic of the policy in the ACL. For example, every time a packet matches the provided match the action is taken.

    1. Examine the specific ACL for the rule by running the following command:

      $ ovn-nbctl find ACL 'external_ids{>=}{"k8s.ovn.org/owner-type"=AdminNetworkPolicy,direction=Ingress,"k8s.ovn.org/name"=cluster-control,gress-index="1"}'
      Where
      cluster-control

      Specifies the name of your ANP.

      Ingress

      Specifies the direction of traffic either of type Ingress or Egress.

      1

      Specifies the rule you want to look at.

      For the example ANP named cluster-control at priority 34, the following is an example output for Ingress rule 1:

      Example output 
      _uuid               : aa1a224d-7960-4952-bdfb-35246bafbac8
action              : allow-related
direction           : to-lport
external_ids        : {direction=Ingress, gress-index="1", "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Ingress:1:tcp", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy, port-policy-protocol=tcp}
label               : 0
log                 : false
match               : "outport == @a14645450421485494999 && ((ip4.src == $a6786643370959569281)) && tcp && tcp.dst==7564"
meter               : acl-logging
name                : "ANP:cluster-control:Ingress:1"
options             : {}
priority            : 26599
severity            : []
tier                : 1

  4. Run the following command to look at address sets in the nbdb:

    $ ovn-nbctl find Address_Set 'external_ids{>=}{"k8s.ovn.org/owner-type"=AdminNetworkPolicy,"k8s.ovn.org/name"=cluster-control}'
    Example outputs for Address_Set 
    _uuid               : 56e89601-5552-4238-9fc3-8833f5494869
addresses           : ["192.168.194.135", "192.168.194.152", "192.168.194.193", "192.168.194.254"]
external_ids        : {direction=Egress, gress-index="1", ip-family=v4, "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Egress:1:v4", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy}
name                : a10706246167277696183

_uuid               : 7df9330d-380b-4bdb-8acd-4eddeda2419c
addresses           : ["10.132.0.10", "10.132.0.11", "10.132.0.12", "10.132.0.13", "10.132.0.14", "10.132.0.15", "10.132.0.16", "10.132.0.17", "10.132.0.5", "10.132.0.7", "10.132.0.71", "10.132.0.75", "10.132.0.8", "10.132.0.81", "10.132.0.9", "10.132.2.10", "10.132.2.11", "10.132.2.12", "10.132.2.14", "10.132.2.15", "10.132.2.3", "10.132.2.4", "10.132.2.5", "10.132.2.6", "10.132.2.7", "10.132.2.8", "10.132.2.9", "10.132.3.64", "10.132.3.65", "10.132.3.72", "10.132.3.73", "10.132.3.76", "10.133.0.10", "10.133.0.11", "10.133.0.12", "10.133.0.13", "10.133.0.14", "10.133.0.15", "10.133.0.16", "10.133.0.17", "10.133.0.18", "10.133.0.19", "10.133.0.20", "10.133.0.21", "10.133.0.22", "10.133.0.23", "10.133.0.24", "10.133.0.25", "10.133.0.26", "10.133.0.27", "10.133.0.28", "10.133.0.29", "10.133.0.30", "10.133.0.31", "10.133.0.32", "10.133.0.33", "10.133.0.34", "10.133.0.35", "10.133.0.36", "10.133.0.37", "10.133.0.38", "10.133.0.39", "10.133.0.40", "10.133.0.41", "10.133.0.42", "10.133.0.44", "10.133.0.45", "10.133.0.46", "10.133.0.47", "10.133.0.48", "10.133.0.5", "10.133.0.6", "10.133.0.7", "10.133.0.8", "10.133.0.9", "10.134.0.10", "10.134.0.11", "10.134.0.12", "10.134.0.13", "10.134.0.14", "10.134.0.15", "10.134.0.16", "10.134.0.17", "10.134.0.18", "10.134.0.19", "10.134.0.20", "10.134.0.21", "10.134.0.22", "10.134.0.23", "10.134.0.24", "10.134.0.25", "10.134.0.26", "10.134.0.27", "10.134.0.28", "10.134.0.30", "10.134.0.31", "10.134.0.32", "10.134.0.33", "10.134.0.34", "10.134.0.35", "10.134.0.36", "10.134.0.37", "10.134.0.38", "10.134.0.4", "10.134.0.42", "10.134.0.9", "10.135.0.10", "10.135.0.11", "10.135.0.12", "10.135.0.13", "10.135.0.14", "10.135.0.15", "10.135.0.16", "10.135.0.17", "10.135.0.18", "10.135.0.19", "10.135.0.23", "10.135.0.24", "10.135.0.26", "10.135.0.27", "10.135.0.29", "10.135.0.3", "10.135.0.4", "10.135.0.40", "10.135.0.41", "10.135.0.42", "10.135.0.43", "10.135.0.44", "10.135.0.5", "10.135.0.6", "10.135.0.7", "10.135.0.8", "10.135.0.9"]
external_ids        : {direction=Ingress, gress-index="4", ip-family=v4, "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Ingress:4:v4", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy}
name                : a13814616246365836720

_uuid               : 84d76f13-ad95-4c00-8329-a0b1d023c289
addresses           : ["10.132.3.76", "10.135.0.44"]
external_ids        : {direction=Egress, gress-index="4", ip-family=v4, "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Egress:4:v4", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy}
name                : a5972452606168369118

_uuid               : 0c53e917-f7ee-4256-8f3a-9522c0481e52
addresses           : ["10.132.0.10", "10.132.0.11", "10.132.0.12", "10.132.0.13", "10.132.0.14", "10.132.0.15", "10.132.0.16", "10.132.0.17", "10.132.0.5", "10.132.0.7", "10.132.0.71", "10.132.0.75", "10.132.0.8", "10.132.0.81", "10.132.0.9", "10.132.2.10", "10.132.2.11", "10.132.2.12", "10.132.2.14", "10.132.2.15", "10.132.2.3", "10.132.2.4", "10.132.2.5", "10.132.2.6", "10.132.2.7", "10.132.2.8", "10.132.2.9", "10.132.3.64", "10.132.3.65", "10.132.3.72", "10.132.3.73", "10.132.3.76", "10.133.0.10", "10.133.0.11", "10.133.0.12", "10.133.0.13", "10.133.0.14", "10.133.0.15", "10.133.0.16", "10.133.0.17", "10.133.0.18", "10.133.0.19", "10.133.0.20", "10.133.0.21", "10.133.0.22", "10.133.0.23", "10.133.0.24", "10.133.0.25", "10.133.0.26", "10.133.0.27", "10.133.0.28", "10.133.0.29", "10.133.0.30", "10.133.0.31", "10.133.0.32", "10.133.0.33", "10.133.0.34", "10.133.0.35", "10.133.0.36", "10.133.0.37", "10.133.0.38", "10.133.0.39", "10.133.0.40", "10.133.0.41", "10.133.0.42", "10.133.0.44", "10.133.0.45", "10.133.0.46", "10.133.0.47", "10.133.0.48", "10.133.0.5", "10.133.0.6", "10.133.0.7", "10.133.0.8", "10.133.0.9", "10.134.0.10", "10.134.0.11", "10.134.0.12", "10.134.0.13", "10.134.0.14", "10.134.0.15", "10.134.0.16", "10.134.0.17", "10.134.0.18", "10.134.0.19", "10.134.0.20", "10.134.0.21", "10.134.0.22", "10.134.0.23", "10.134.0.24", "10.134.0.25", "10.134.0.26", "10.134.0.27", "10.134.0.28", "10.134.0.30", "10.134.0.31", "10.134.0.32", "10.134.0.33", "10.134.0.34", "10.134.0.35", "10.134.0.36", "10.134.0.37", "10.134.0.38", "10.134.0.4", "10.134.0.42", "10.134.0.9", "10.135.0.10", "10.135.0.11", "10.135.0.12", "10.135.0.13", "10.135.0.14", "10.135.0.15", "10.135.0.16", "10.135.0.17", "10.135.0.18", "10.135.0.19", "10.135.0.23", "10.135.0.24", "10.135.0.26", "10.135.0.27", "10.135.0.29", "10.135.0.3", "10.135.0.4", "10.135.0.40", "10.135.0.41", "10.135.0.42", "10.135.0.43", "10.135.0.44", "10.135.0.5", "10.135.0.6", "10.135.0.7", "10.135.0.8", "10.135.0.9"]
external_ids        : {direction=Egress, gress-index="2", ip-family=v4, "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Egress:2:v4", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy}
name                : a18396736153283155648

_uuid               : 5228bf1b-dfd8-40ec-bfa8-95c5bf9aded9
addresses           : []
external_ids        : {direction=Ingress, gress-index="0", ip-family=v4, "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Ingress:0:v4", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy}
name                : a14545668191619617708

_uuid               : 46530d69-70da-4558-8c63-884ec9dc4f25
addresses           : ["10.132.2.10", "10.132.2.5", "10.132.2.6", "10.132.2.7", "10.132.2.8", "10.132.2.9", "10.133.0.47", "10.134.0.33", "10.135.0.10", "10.135.0.11", "10.135.0.12", "10.135.0.19", "10.135.0.24", "10.135.0.7", "10.135.0.8", "10.135.0.9"]
external_ids        : {direction=Ingress, gress-index="1", ip-family=v4, "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Ingress:1:v4", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy}
name                : a6786643370959569281

_uuid               : 65fdcdea-0b9f-4318-9884-1b51d231ad1d
addresses           : ["10.132.3.72", "10.135.0.42"]
external_ids        : {direction=Ingress, gress-index="2", ip-family=v4, "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Ingress:2:v4", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy}
name                : a13730899355151937870

_uuid               : 73eabdb0-36bf-4ca3-b66d-156ac710df4c
addresses           : ["10.0.32.0/19", "10.0.56.38/32", "10.0.69.0/24", "10.132.3.72", "10.135.0.42", "172.29.0.0/30", "192.168.194.103", "192.168.194.2"]
external_ids        : {direction=Egress, gress-index="3", ip-family=v4, "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Egress:3:v4", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy}
name                : a10622494091691694581

_uuid               : 50cdbef2-71b5-474b-914c-6fcd1d7712d3
addresses           : ["10.132.0.10", "10.132.0.11", "10.132.0.12", "10.132.0.13", "10.132.0.14", "10.132.0.15", "10.132.0.16", "10.132.0.17", "10.132.0.5", "10.132.0.7", "10.132.0.71", "10.132.0.75", "10.132.0.8", "10.132.0.81", "10.132.0.9", "10.132.2.10", "10.132.2.11", "10.132.2.12", "10.132.2.14", "10.132.2.15", "10.132.2.3", "10.132.2.4", "10.132.2.5", "10.132.2.6", "10.132.2.7", "10.132.2.8", "10.132.2.9", "10.132.3.64", "10.132.3.65", "10.132.3.72", "10.132.3.73", "10.132.3.76", "10.133.0.10", "10.133.0.11", "10.133.0.12", "10.133.0.13", "10.133.0.14", "10.133.0.15", "10.133.0.16", "10.133.0.17", "10.133.0.18", "10.133.0.19", "10.133.0.20", "10.133.0.21", "10.133.0.22", "10.133.0.23", "10.133.0.24", "10.133.0.25", "10.133.0.26", "10.133.0.27", "10.133.0.28", "10.133.0.29", "10.133.0.30", "10.133.0.31", "10.133.0.32", "10.133.0.33", "10.133.0.34", "10.133.0.35", "10.133.0.36", "10.133.0.37", "10.133.0.38", "10.133.0.39", "10.133.0.40", "10.133.0.41", "10.133.0.42", "10.133.0.44", "10.133.0.45", "10.133.0.46", "10.133.0.47", "10.133.0.48", "10.133.0.5", "10.133.0.6", "10.133.0.7", "10.133.0.8", "10.133.0.9", "10.134.0.10", "10.134.0.11", "10.134.0.12", "10.134.0.13", "10.134.0.14", "10.134.0.15", "10.134.0.16", "10.134.0.17", "10.134.0.18", "10.134.0.19", "10.134.0.20", "10.134.0.21", "10.134.0.22", "10.134.0.23", "10.134.0.24", "10.134.0.25", "10.134.0.26", "10.134.0.27", "10.134.0.28", "10.134.0.30", "10.134.0.31", "10.134.0.32", "10.134.0.33", "10.134.0.34", "10.134.0.35", "10.134.0.36", "10.134.0.37", "10.134.0.38", "10.134.0.4", "10.134.0.42", "10.134.0.9", "10.135.0.10", "10.135.0.11", "10.135.0.12", "10.135.0.13", "10.135.0.14", "10.135.0.15", "10.135.0.16", "10.135.0.17", "10.135.0.18", "10.135.0.19", "10.135.0.23", "10.135.0.24", "10.135.0.26", "10.135.0.27", "10.135.0.29", "10.135.0.3", "10.135.0.4", "10.135.0.40", "10.135.0.41", "10.135.0.42", "10.135.0.43", "10.135.0.44", "10.135.0.5", "10.135.0.6", "10.135.0.7", "10.135.0.8", "10.135.0.9"]
external_ids        : {direction=Egress, gress-index="0", ip-family=v4, "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Egress:0:v4", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy}
name                : a13517855690389298082

_uuid               : 32a42f32-2d11-43dd-979d-a56d7ee6aa57
addresses           : ["10.132.3.76", "10.135.0.44"]
external_ids        : {direction=Ingress, gress-index="3", ip-family=v4, "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Ingress:3:v4", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy}
name                : a764182844364804195

_uuid               : 8fd3b977-6e1c-47aa-82b7-e3e3136c4a72
addresses           : ["0.0.0.0/0"]
external_ids        : {direction=Egress, gress-index="5", ip-family=v4, "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Egress:5:v4", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy}
name                : a11452480169090787059

    1. Examine the specific address set of the rule by running the following command:

      $ ovn-nbctl find Address_Set 'external_ids{>=}{"k8s.ovn.org/owner-type"=AdminNetworkPolicy,direction=Egress,"k8s.ovn.org/name"=cluster-control,gress-index="5"}'
      Example outputs for Address_Set 
      _uuid               : 8fd3b977-6e1c-47aa-82b7-e3e3136c4a72
addresses           : ["0.0.0.0/0"]
external_ids        : {direction=Egress, gress-index="5", ip-family=v4, "k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control:Egress:5:v4", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy}
name                : a11452480169090787059

  5. Run the following command to look at the port groups in the nbdb:

    $ ovn-nbctl find Port_Group 'external_ids{>=}{"k8s.ovn.org/owner-type"=AdminNetworkPolicy,"k8s.ovn.org/name"=cluster-control}'
    Example outputs for Port_Group 
    _uuid               : f50acf71-7488-4b9a-b7b8-c8a024e99d21
acls                : [04f20275-c410-405c-a923-0e677f767889, 0d5e4722-b608-4bb1-b625-23c323cc9926, 1a27d30e-3f96-4915-8ddd-ade7f22c117b, 1a68a5ed-e7f9-47d0-b55c-89184d97e81a, 4b5d836a-e0a3-4088-825e-f9f0ca58e538, 5a6e5bb4-36eb-4209-b8bc-c611983d4624, 5d09957d-d2cc-4f5a-9ddd-b97d9d772023, aa1a224d-7960-4952-bdfb-35246bafbac8, b23a087f-08f8-4225-8c27-4a9a9ee0c407, b7be6472-df67-439c-8c9c-f55929f0a6e0, d14ed5cf-2e06-496e-8cae-6b76d5dd5ccd]
external_ids        : {"k8s.ovn.org/id"="default-network-controller:AdminNetworkPolicy:cluster-control", "k8s.ovn.org/name"=cluster-control, "k8s.ovn.org/owner-controller"=default-network-controller, "k8s.ovn.org/owner-type"=AdminNetworkPolicy}
name                : a14645450421485494999
ports               : [5e75f289-8273-4f8a-8798-8c10f7318833, de7e1b71-6184-445d-93e7-b20acadf41ea]

Additional resources