×
Description

Pod is a collection of containers that can run on a host. This resource is created by clients and scheduled onto hosts.

Type

object

Specification

Property Type Description

apiVersion

string

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

kind

string

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

metadata

ObjectMeta

Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

spec

object

PodSpec is a description of a pod.

status

object

PodStatus represents information about the status of a pod. Status may trail the actual state of a system, especially if the node that hosts the pod cannot contact the control plane.

.spec

Description

PodSpec is a description of a pod.

Type

object

Required
  • containers

Property Type Description

activeDeadlineSeconds

integer

Optional duration in seconds the pod may be active on the node relative to StartTime before the system will actively try to mark it failed and kill associated containers. Value must be a positive integer.

affinity

object

Affinity is a group of affinity scheduling rules.

automountServiceAccountToken

boolean

AutomountServiceAccountToken indicates whether a service account token should be automatically mounted.

containers

array

List of containers belonging to the pod. Containers cannot currently be added or removed. There must be at least one container in a Pod. Cannot be updated.

containers[]

object

A single application container that you want to run within a pod.

dnsConfig

object

PodDNSConfig defines the DNS parameters of a pod in addition to those generated from DNSPolicy.

dnsPolicy

string

Set DNS policy for the pod. Defaults to "ClusterFirst". Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default' or 'None'. DNS parameters given in DNSConfig will be merged with the policy selected with DNSPolicy. To have DNS options set along with hostNetwork, you have to specify DNS policy explicitly to 'ClusterFirstWithHostNet'.

Possible enum values: - "ClusterFirst" indicates that the pod should use cluster DNS first unless hostNetwork is true, if it is available, then fall back on the default (as determined by kubelet) DNS settings. - "ClusterFirstWithHostNet" indicates that the pod should use cluster DNS first, if it is available, then fall back on the default (as determined by kubelet) DNS settings. - "Default" indicates that the pod should use the default (as determined by kubelet) DNS settings. - "None" indicates that the pod should use empty DNS settings. DNS parameters such as nameservers and search paths should be defined via DNSConfig.

enableServiceLinks

boolean

EnableServiceLinks indicates whether information about services should be injected into pod’s environment variables, matching the syntax of Docker links. Optional: Defaults to true.

ephemeralContainers

array

List of ephemeral containers run in this pod. Ephemeral containers may be run in an existing pod to perform user-initiated actions such as debugging. This list cannot be specified when creating a pod, and it cannot be modified by updating the pod spec. In order to add an ephemeral container to an existing pod, use the pod’s ephemeralcontainers subresource.

ephemeralContainers[]

object

An EphemeralContainer is a temporary container that you may add to an existing Pod for user-initiated activities such as debugging. Ephemeral containers have no resource or scheduling guarantees, and they will not be restarted when they exit or when a Pod is removed or restarted. The kubelet may evict a Pod if an ephemeral container causes the Pod to exceed its resource allocation.

To add an ephemeral container, use the ephemeralcontainers subresource of an existing Pod. Ephemeral containers may not be removed or restarted.

hostAliases

array

HostAliases is an optional list of hosts and IPs that will be injected into the pod’s hosts file if specified. This is only valid for non-hostNetwork pods.

hostAliases[]

object

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file.

hostIPC

boolean

Use the host’s ipc namespace. Optional: Default to false.

hostNetwork

boolean

Host networking requested for this pod. Use the host’s network namespace. If this option is set, the ports that will be used must be specified. Default to false.

hostPID

boolean

Use the host’s pid namespace. Optional: Default to false.

hostUsers

boolean

Use the host’s user namespace. Optional: Default to true. If set to true or not present, the pod will be run in the host user namespace, useful for when the pod needs a feature only available to the host user namespace, such as loading a kernel module with CAP_SYS_MODULE. When set to false, a new userns is created for the pod. Setting false is useful for mitigating container breakout vulnerabilities even allowing users to run their containers as root without actually having root privileges on the host. This field is alpha-level and is only honored by servers that enable the UserNamespacesSupport feature.

hostname

string

Specifies the hostname of the Pod If not specified, the pod’s hostname will be set to a system-defined value.

imagePullSecrets

array

ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. If specified, these secrets will be passed to individual puller implementations for them to use. More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod

imagePullSecrets[]

object

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

initContainers

array

List of initialization containers belonging to the pod. Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion. Init containers cannot currently be added or removed. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/

initContainers[]

object

A single application container that you want to run within a pod.

nodeName

string

NodeName is a request to schedule this pod onto a specific node. If it is non-empty, the scheduler simply schedules this pod onto that node, assuming that it fits resource requirements.

nodeSelector

object (string)

NodeSelector is a selector which must be true for the pod to fit on a node. Selector which must match a node’s labels for the pod to be scheduled on that node. More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/

os

object

PodOS defines the OS parameters of a pod.

overhead

object (Quantity)

Overhead represents the resource overhead associated with running a pod for a given RuntimeClass. This field will be autopopulated at admission time by the RuntimeClass admission controller. If the RuntimeClass admission controller is enabled, overhead must not be set in Pod create requests. The RuntimeClass admission controller will reject Pod create requests which have the overhead already set. If RuntimeClass is configured and selected in the PodSpec, Overhead will be set to the value defined in the corresponding RuntimeClass, otherwise it will remain unset and treated as zero. More info: https://git.k8s.io/enhancements/keps/sig-node/688-pod-overhead/README.md

preemptionPolicy

string

PreemptionPolicy is the Policy for preempting pods with lower priority. One of Never, PreemptLowerPriority. Defaults to PreemptLowerPriority if unset.

Possible enum values: - "Never" means that pod never preempts other pods with lower priority. - "PreemptLowerPriority" means that pod can preempt other pods with lower priority.

priority

integer

The priority value. Various system components use this field to find the priority of the pod. When Priority Admission Controller is enabled, it prevents users from setting this field. The admission controller populates this field from PriorityClassName. The higher the value, the higher the priority.

priorityClassName

string

If specified, indicates the pod’s priority. "system-node-critical" and "system-cluster-critical" are two special keywords which indicate the highest priorities with the former being the highest priority. Any other name must be defined by creating a PriorityClass object with that name. If not specified, the pod priority will be default or zero if there is no default.

readinessGates

array

If specified, all readiness gates will be evaluated for pod readiness. A pod is ready when all its containers are ready AND all conditions specified in the readiness gates have status equal to "True" More info: https://git.k8s.io/enhancements/keps/sig-network/580-pod-readiness-gates

readinessGates[]

object

PodReadinessGate contains the reference to a pod condition

resourceClaims

array

ResourceClaims defines which ResourceClaims must be allocated and reserved before the Pod is allowed to start. The resources will be made available to those containers which consume them by name.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable.

resourceClaims[]

object

PodResourceClaim references exactly one ResourceClaim through a ClaimSource. It adds a name to it that uniquely identifies the ResourceClaim inside the Pod. Containers that need access to the ResourceClaim reference it with this name.

restartPolicy

string

Restart policy for all containers within the pod. One of Always, OnFailure, Never. In some contexts, only a subset of those values may be permitted. Default to Always. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy

Possible enum values: - "Always" - "Never" - "OnFailure"

runtimeClassName

string

RuntimeClassName refers to a RuntimeClass object in the node.k8s.io group, which should be used to run this pod. If no RuntimeClass resource matches the named class, the pod will not be run. If unset or empty, the "legacy" RuntimeClass will be used, which is an implicit class with an empty definition that uses the default runtime handler. More info: https://git.k8s.io/enhancements/keps/sig-node/585-runtime-class

schedulerName

string

If specified, the pod will be dispatched by specified scheduler. If not specified, the pod will be dispatched by default scheduler.

schedulingGates

array

SchedulingGates is an opaque list of values that if specified will block scheduling the pod. If schedulingGates is not empty, the pod will stay in the SchedulingGated state and the scheduler will not attempt to schedule the pod.

SchedulingGates can only be set at pod creation time, and be removed only afterwards.

This is a beta feature enabled by the PodSchedulingReadiness feature gate.

schedulingGates[]

object

PodSchedulingGate is associated to a Pod to guard its scheduling.

securityContext

object

PodSecurityContext holds pod-level security attributes and common container settings. Some fields are also present in container.securityContext. Field values of container.securityContext take precedence over field values of PodSecurityContext.

serviceAccount

string

DeprecatedServiceAccount is a depreciated alias for ServiceAccountName. Deprecated: Use serviceAccountName instead.

serviceAccountName

string

ServiceAccountName is the name of the ServiceAccount to use to run this pod. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/

setHostnameAsFQDN

boolean

If true the pod’s hostname will be configured as the pod’s FQDN, rather than the leaf name (the default). In Linux containers, this means setting the FQDN in the hostname field of the kernel (the nodename field of struct utsname). In Windows containers, this means setting the registry value of hostname for the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters to FQDN. If a pod does not have FQDN, this has no effect. Default to false.

shareProcessNamespace

boolean

Share a single process namespace between all of the containers in a pod. When this is set containers will be able to view and signal processes from other containers in the same pod, and the first process in each container will not be assigned PID 1. HostPID and ShareProcessNamespace cannot both be set. Optional: Default to false.

subdomain

string

If specified, the fully qualified Pod hostname will be "<hostname>.<subdomain>.<pod namespace>.svc.<cluster domain>". If not specified, the pod will not have a domainname at all.

terminationGracePeriodSeconds

integer

Optional duration in seconds the pod needs to terminate gracefully. May be decreased in delete request. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). If this value is nil, the default grace period will be used instead. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. Defaults to 30 seconds.

tolerations

array

If specified, the pod’s tolerations.

tolerations[]

object

The pod this Toleration is attached to tolerates any taint that matches the triple <key,value,effect> using the matching operator <operator>.

topologySpreadConstraints

array

TopologySpreadConstraints describes how a group of pods ought to spread across topology domains. Scheduler will schedule pods in a way which abides by the constraints. All topologySpreadConstraints are ANDed.

topologySpreadConstraints[]

object

TopologySpreadConstraint specifies how to spread matching pods among the given topology.

volumes

array

List of volumes that can be mounted by containers belonging to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes

volumes[]

object

Volume represents a named volume in a pod that may be accessed by any container in the pod.

.spec.affinity

Description

Affinity is a group of affinity scheduling rules.

Type

object

Property Type Description

nodeAffinity

object

Node affinity is a group of node affinity scheduling rules.

podAffinity

object

Pod affinity is a group of inter pod affinity scheduling rules.

podAntiAffinity

object

Pod anti affinity is a group of inter pod anti affinity scheduling rules.

.spec.affinity.nodeAffinity

Description

Node affinity is a group of node affinity scheduling rules.

Type

object

Property Type Description

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node matches the corresponding matchExpressions; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

An empty preferred scheduling term matches all objects with implicit weight 0 (i.e. it’s a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op).

requiredDuringSchedulingIgnoredDuringExecution

object

A node selector represents the union of the results of one or more label queries over a set of nodes; that is, it represents the OR of the selectors represented by the node selector terms.

.spec.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution

Description

The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node matches the corresponding matchExpressions; the node(s) with the highest sum are the most preferred.

Type

array

.spec.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution[]

Description

An empty preferred scheduling term matches all objects with implicit weight 0 (i.e. it’s a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op).

Type

object

Required
  • weight

  • preference

Property Type Description

preference

object

A null or empty node selector term matches no objects. The requirements of them are ANDed. The TopologySelectorTerm type implements a subset of the NodeSelectorTerm.

weight

integer

Weight associated with matching the corresponding nodeSelectorTerm, in the range 1-100.

.spec.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution[].preference

Description

A null or empty node selector term matches no objects. The requirements of them are ANDed. The TopologySelectorTerm type implements a subset of the NodeSelectorTerm.

Type

object

Property Type Description

matchExpressions

array

A list of node selector requirements by node’s labels.

matchExpressions[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchFields

array

A list of node selector requirements by node’s fields.

matchFields[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

.spec.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution[].preference.matchExpressions

Description

A list of node selector requirements by node’s labels.

Type

array

.spec.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution[].preference.matchExpressions[]

Description

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

Type

object

Required
  • key

  • operator

Property Type Description

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

Possible enum values: - "DoesNotExist" - "Exists" - "Gt" - "In" - "Lt" - "NotIn"

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

.spec.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution[].preference.matchFields

Description

A list of node selector requirements by node’s fields.

Type

array

.spec.affinity.nodeAffinity.preferredDuringSchedulingIgnoredDuringExecution[].preference.matchFields[]

Description

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

Type

object

Required
  • key

  • operator

Property Type Description

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

Possible enum values: - "DoesNotExist" - "Exists" - "Gt" - "In" - "Lt" - "NotIn"

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

.spec.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution

Description

A node selector represents the union of the results of one or more label queries over a set of nodes; that is, it represents the OR of the selectors represented by the node selector terms.

Type

object

Required
  • nodeSelectorTerms

Property Type Description

nodeSelectorTerms

array

Required. A list of node selector terms. The terms are ORed.

nodeSelectorTerms[]

object

A null or empty node selector term matches no objects. The requirements of them are ANDed. The TopologySelectorTerm type implements a subset of the NodeSelectorTerm.

.spec.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms

Description

Required. A list of node selector terms. The terms are ORed.

Type

array

.spec.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms[]

Description

A null or empty node selector term matches no objects. The requirements of them are ANDed. The TopologySelectorTerm type implements a subset of the NodeSelectorTerm.

Type

object

Property Type Description

matchExpressions

array

A list of node selector requirements by node’s labels.

matchExpressions[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchFields

array

A list of node selector requirements by node’s fields.

matchFields[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

.spec.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms[].matchExpressions

Description

A list of node selector requirements by node’s labels.

Type

array

.spec.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms[].matchExpressions[]

Description

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

Type

object

Required
  • key

  • operator

Property Type Description

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

Possible enum values: - "DoesNotExist" - "Exists" - "Gt" - "In" - "Lt" - "NotIn"

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

.spec.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms[].matchFields

Description

A list of node selector requirements by node’s fields.

Type

array

.spec.affinity.nodeAffinity.requiredDuringSchedulingIgnoredDuringExecution.nodeSelectorTerms[].matchFields[]

Description

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

Type

object

Required
  • key

  • operator

Property Type Description

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

Possible enum values: - "DoesNotExist" - "Exists" - "Gt" - "In" - "Lt" - "NotIn"

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

.spec.affinity.podAffinity

Description

Pod affinity is a group of inter pod affinity scheduling rules.

Type

object

Property Type Description

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

requiredDuringSchedulingIgnoredDuringExecution

array

If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

requiredDuringSchedulingIgnoredDuringExecution[]

object

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

.spec.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution

Description

The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

Type

array

.spec.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution[]

Description

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

Type

object

Required
  • weight

  • podAffinityTerm

Property Type Description

podAffinityTerm

object

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

weight

integer

weight associated with matching the corresponding podAffinityTerm, in the range 1-100.

.spec.affinity.podAffinity.preferredDuringSchedulingIgnoredDuringExecution[].podAffinityTerm

Description

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

Type

object

Required
  • topologyKey

Property Type Description

labelSelector

LabelSelector

A label query over a set of resources, in this case pods.

namespaceSelector

LabelSelector

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

.spec.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution

Description

If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

Type

array

.spec.affinity.podAffinity.requiredDuringSchedulingIgnoredDuringExecution[]

Description

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

Type

object

Required
  • topologyKey

Property Type Description

labelSelector

LabelSelector

A label query over a set of resources, in this case pods.

namespaceSelector

LabelSelector

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

.spec.affinity.podAntiAffinity

Description

Pod anti affinity is a group of inter pod anti affinity scheduling rules.

Type

object

Property Type Description

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the anti-affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling anti-affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

requiredDuringSchedulingIgnoredDuringExecution

array

If the anti-affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the anti-affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

requiredDuringSchedulingIgnoredDuringExecution[]

object

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

.spec.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution

Description

The scheduler will prefer to schedule pods to nodes that satisfy the anti-affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling anti-affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

Type

array

.spec.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution[]

Description

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

Type

object

Required
  • weight

  • podAffinityTerm

Property Type Description

podAffinityTerm

object

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

weight

integer

weight associated with matching the corresponding podAffinityTerm, in the range 1-100.

.spec.affinity.podAntiAffinity.preferredDuringSchedulingIgnoredDuringExecution[].podAffinityTerm

Description

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

Type

object

Required
  • topologyKey

Property Type Description

labelSelector

LabelSelector

A label query over a set of resources, in this case pods.

namespaceSelector

LabelSelector

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

.spec.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution

Description

If the anti-affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the anti-affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

Type

array

.spec.affinity.podAntiAffinity.requiredDuringSchedulingIgnoredDuringExecution[]

Description

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

Type

object

Required
  • topologyKey

Property Type Description

labelSelector

LabelSelector

A label query over a set of resources, in this case pods.

namespaceSelector

LabelSelector

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

.spec.containers

Description

List of containers belonging to the pod. Containers cannot currently be added or removed. There must be at least one container in a Pod. Cannot be updated.

Type

array

.spec.containers[]

Description

A single application container that you want to run within a pod.

Type

object

Required
  • name

Property Type Description

args

array (string)

Arguments to the entrypoint. The container image’s CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell

command

array (string)

Entrypoint array. Not executed within a shell. The container image’s ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell

env

array

List of environment variables to set in the container. Cannot be updated.

env[]

object

EnvVar represents an environment variable present in a Container.

envFrom

array

List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated.

envFrom[]

object

EnvFromSource represents the source of a set of ConfigMaps

image

string

Container image name. More info: https://kubernetes.io/docs/concepts/containers/images This field is optional to allow higher level config management to default or override container images in workload controllers like Deployments and StatefulSets.

imagePullPolicy

string

Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images

Possible enum values: - "Always" means that kubelet always attempts to pull the latest image. Container will fail If the pull fails. - "IfNotPresent" means that kubelet pulls if the image isn’t present on disk. Container will fail if the image isn’t present and the pull fails. - "Never" means that kubelet never pulls an image, but only uses a local image. Container will fail if the image isn’t present

lifecycle

object

Lifecycle describes actions that the management system should take in response to container lifecycle events. For the PostStart and PreStop lifecycle handlers, management of the container blocks until the action is complete, unless the container process fails, in which case the handler is aborted.

livenessProbe

object

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

name

string

Name of the container specified as a DNS_LABEL. Each container in a pod must have a unique name (DNS_LABEL). Cannot be updated.

ports

array

List of ports to expose from the container. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Modifying this array with strategic merge patch may corrupt the data. For more information See https://github.com/kubernetes/kubernetes/issues/108255. Cannot be updated.

ports[]

object

ContainerPort represents a network port in a single container.

readinessProbe

object

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

resizePolicy

array

Resources resize policy for the container.

resizePolicy[]

object

ContainerResizePolicy represents resource resize policy for the container.

resources

object

ResourceRequirements describes the compute resource requirements.

restartPolicy

string

RestartPolicy defines the restart behavior of individual containers in a pod. This field may only be set for init containers, and the only allowed value is "Always". For non-init containers or when this field is not specified, the restart behavior is defined by the Pod’s restart policy and the container type. Setting the RestartPolicy as "Always" for the init container will have the following effect: this init container will be continually restarted on exit until all regular containers have terminated. Once all regular containers have completed, all init containers with restartPolicy "Always" will be shut down. This lifecycle differs from normal init containers and is often referred to as a "sidecar" container. Although this init container still starts in the init container sequence, it does not wait for the container to complete before proceeding to the next init container. Instead, the next init container starts immediately after this init container is started, or after any startupProbe has successfully completed.

securityContext

object

SecurityContext holds security configuration that will be applied to a container. Some fields are present in both SecurityContext and PodSecurityContext. When both are set, the values in SecurityContext take precedence.

startupProbe

object

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

stdin

boolean

Whether this container should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the container will always result in EOF. Default is false.

stdinOnce

boolean

Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false

terminationMessagePath

string

Optional: Path at which the file to which the container’s termination message will be written is mounted into the container’s filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated.

terminationMessagePolicy

string

Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.

Possible enum values: - "FallbackToLogsOnError" will read the most recent contents of the container logs for the container status message when the container exits with an error and the terminationMessagePath has no contents. - "File" is the default behavior and will set the container status message to the contents of the container’s terminationMessagePath when the container exits.

tty

boolean

Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. Default is false.

volumeDevices

array

volumeDevices is the list of block devices to be used by the container.

volumeDevices[]

object

volumeDevice describes a mapping of a raw block device within a container.

volumeMounts

array

Pod volumes to mount into the container’s filesystem. Cannot be updated.

volumeMounts[]

object

VolumeMount describes a mounting of a Volume within a container.

workingDir

string

Container’s working directory. If not specified, the container runtime’s default will be used, which might be configured in the container image. Cannot be updated.

.spec.containers[].env

Description

List of environment variables to set in the container. Cannot be updated.

Type

array

.spec.containers[].env[]

Description

EnvVar represents an environment variable present in a Container.

Type

object

Required
  • name

Property Type Description

name

string

Name of the environment variable. Must be a C_IDENTIFIER.

value

string

Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".

valueFrom

object

EnvVarSource represents a source for the value of an EnvVar.

.spec.containers[].env[].valueFrom

Description

EnvVarSource represents a source for the value of an EnvVar.

Type

object

Property Type Description

configMapKeyRef

object

Selects a key from a ConfigMap.

fieldRef

object

ObjectFieldSelector selects an APIVersioned field of an object.

resourceFieldRef

object

ResourceFieldSelector represents container resources (cpu, memory) and their output format

secretKeyRef

object

SecretKeySelector selects a key of a Secret.

.spec.containers[].env[].valueFrom.configMapKeyRef

Description

Selects a key from a ConfigMap.

Type

object

Required
  • key

Property Type Description

key

string

The key to select.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

Specify whether the ConfigMap or its key must be defined

.spec.containers[].env[].valueFrom.fieldRef

Description

ObjectFieldSelector selects an APIVersioned field of an object.

Type

object

Required
  • fieldPath

Property Type Description

apiVersion

string

Version of the schema the FieldPath is written in terms of, defaults to "v1".

fieldPath

string

Path of the field to select in the specified API version.

.spec.containers[].env[].valueFrom.resourceFieldRef

Description

ResourceFieldSelector represents container resources (cpu, memory) and their output format

Type

object

Required
  • resource

Property Type Description

containerName

string

Container name: required for volumes, optional for env vars

divisor

Quantity

Specifies the output format of the exposed resources, defaults to "1"

resource

string

Required: resource to select

.spec.containers[].env[].valueFrom.secretKeyRef

Description

SecretKeySelector selects a key of a Secret.

Type

object

Required
  • key

Property Type Description

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

Specify whether the Secret or its key must be defined

.spec.containers[].envFrom

Description

List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated.

Type

array

.spec.containers[].envFrom[]

Description

EnvFromSource represents the source of a set of ConfigMaps

Type

object

Property Type Description

configMapRef

object

ConfigMapEnvSource selects a ConfigMap to populate the environment variables with.

The contents of the target ConfigMap’s Data field will represent the key-value pairs as environment variables.

prefix

string

An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER.

secretRef

object

SecretEnvSource selects a Secret to populate the environment variables with.

The contents of the target Secret’s Data field will represent the key-value pairs as environment variables.

.spec.containers[].envFrom[].configMapRef

Description

ConfigMapEnvSource selects a ConfigMap to populate the environment variables with.

The contents of the target ConfigMap’s Data field will represent the key-value pairs as environment variables.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

Specify whether the ConfigMap must be defined

.spec.containers[].envFrom[].secretRef

Description

SecretEnvSource selects a Secret to populate the environment variables with.

The contents of the target Secret’s Data field will represent the key-value pairs as environment variables.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

Specify whether the Secret must be defined

.spec.containers[].lifecycle

Description

Lifecycle describes actions that the management system should take in response to container lifecycle events. For the PostStart and PreStop lifecycle handlers, management of the container blocks until the action is complete, unless the container process fails, in which case the handler is aborted.

Type

object

Property Type Description

postStart

object

LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.

preStop

object

LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.

.spec.containers[].lifecycle.postStart

Description

LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

.spec.containers[].lifecycle.postStart.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.containers[].lifecycle.postStart.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.containers[].lifecycle.postStart.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.containers[].lifecycle.postStart.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.containers[].lifecycle.postStart.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.containers[].lifecycle.preStop

Description

LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

.spec.containers[].lifecycle.preStop.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.containers[].lifecycle.preStop.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.containers[].lifecycle.preStop.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.containers[].lifecycle.preStop.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.containers[].lifecycle.preStop.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.containers[].livenessProbe

Description

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

failureThreshold

integer

Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.

grpc

object

GRPC specifies an action involving a GRPC port.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

initialDelaySeconds

integer

Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

periodSeconds

integer

How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.

successThreshold

integer

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

terminationGracePeriodSeconds

integer

Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.

timeoutSeconds

integer

Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

.spec.containers[].livenessProbe.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.containers[].livenessProbe.grpc

Description

GRPC specifies an action involving a GRPC port.

Type

object

Required
  • port

Property Type Description

port

integer

Port number of the gRPC service. Number must be in the range 1 to 65535.

service

string

Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

If this is not specified, the default behavior is defined by gRPC.

.spec.containers[].livenessProbe.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.containers[].livenessProbe.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.containers[].livenessProbe.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.containers[].livenessProbe.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.containers[].ports

Description

List of ports to expose from the container. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Modifying this array with strategic merge patch may corrupt the data. For more information See https://github.com/kubernetes/kubernetes/issues/108255. Cannot be updated.

Type

array

.spec.containers[].ports[]

Description

ContainerPort represents a network port in a single container.

Type

object

Required
  • containerPort

Property Type Description

containerPort

integer

Number of port to expose on the pod’s IP address. This must be a valid port number, 0 < x < 65536.

hostIP

string

What host IP to bind the external port to.

hostPort

integer

Number of port to expose on the host. If specified, this must be a valid port number, 0 < x < 65536. If HostNetwork is specified, this must match ContainerPort. Most containers do not need this.

name

string

If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services.

protocol

string

Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP".

Possible enum values: - "SCTP" is the SCTP protocol. - "TCP" is the TCP protocol. - "UDP" is the UDP protocol.

.spec.containers[].readinessProbe

Description

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

failureThreshold

integer

Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.

grpc

object

GRPC specifies an action involving a GRPC port.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

initialDelaySeconds

integer

Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

periodSeconds

integer

How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.

successThreshold

integer

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

terminationGracePeriodSeconds

integer

Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.

timeoutSeconds

integer

Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

.spec.containers[].readinessProbe.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.containers[].readinessProbe.grpc

Description

GRPC specifies an action involving a GRPC port.

Type

object

Required
  • port

Property Type Description

port

integer

Port number of the gRPC service. Number must be in the range 1 to 65535.

service

string

Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

If this is not specified, the default behavior is defined by gRPC.

.spec.containers[].readinessProbe.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.containers[].readinessProbe.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.containers[].readinessProbe.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.containers[].readinessProbe.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.containers[].resizePolicy

Description

Resources resize policy for the container.

Type

array

.spec.containers[].resizePolicy[]

Description

ContainerResizePolicy represents resource resize policy for the container.

Type

object

Required
  • resourceName

  • restartPolicy

Property Type Description

resourceName

string

Name of the resource to which this resource resize policy applies. Supported values: cpu, memory.

restartPolicy

string

Restart policy to apply when specified resource is resized. If not specified, it defaults to NotRequired.

.spec.containers[].resources

Description

ResourceRequirements describes the compute resource requirements.

Type

object

Property Type Description

claims

array

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable. It can only be set for containers.

claims[]

object

ResourceClaim references one entry in PodSpec.ResourceClaims.

limits

object (Quantity)

Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

requests

object (Quantity)

Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

.spec.containers[].resources.claims

Description

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable. It can only be set for containers.

Type

array

.spec.containers[].resources.claims[]

Description

ResourceClaim references one entry in PodSpec.ResourceClaims.

Type

object

Required
  • name

Property Type Description

name

string

Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.

.spec.containers[].securityContext

Description

SecurityContext holds security configuration that will be applied to a container. Some fields are present in both SecurityContext and PodSecurityContext. When both are set, the values in SecurityContext take precedence.

Type

object

Property Type Description

allowPrivilegeEscalation

boolean

AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is: 1) run as Privileged 2) has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows.

capabilities

object

Adds and removes POSIX capabilities from running containers.

privileged

boolean

Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows.

procMount

string

procMount denotes the type of proc mount to use for the containers. The default is DefaultProcMount which uses the container runtime defaults for readonly paths and masked paths. This requires the ProcMountType feature flag to be enabled. Note that this field cannot be set when spec.os.name is windows.

Possible enum values: - "Default" uses the container runtime defaults for readonly and masked paths for /proc. Most container runtimes mask certain paths in /proc to avoid accidental security exposure of special devices or information. - "Unmasked" bypasses the default masking behavior of the container runtime and ensures the newly created /proc the container stays in tact with no modifications.

readOnlyRootFilesystem

boolean

Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows.

runAsGroup

integer

The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.

runAsNonRoot

boolean

Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.

runAsUser

integer

The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.

seLinuxOptions

object

SELinuxOptions are the labels to be applied to the container

seccompProfile

object

SeccompProfile defines a pod/container’s seccomp profile settings. Only one profile source may be set.

windowsOptions

object

WindowsSecurityContextOptions contain Windows-specific options and credentials.

.spec.containers[].securityContext.capabilities

Description

Adds and removes POSIX capabilities from running containers.

Type

object

Property Type Description

add

array (string)

Added capabilities

drop

array (string)

Removed capabilities

.spec.containers[].securityContext.seLinuxOptions

Description

SELinuxOptions are the labels to be applied to the container

Type

object

Property Type Description

level

string

Level is SELinux level label that applies to the container.

role

string

Role is a SELinux role label that applies to the container.

type

string

Type is a SELinux type label that applies to the container.

user

string

User is a SELinux user label that applies to the container.

.spec.containers[].securityContext.seccompProfile

Description

SeccompProfile defines a pod/container’s seccomp profile settings. Only one profile source may be set.

Type

object

Required
  • type

Property Type Description

localhostProfile

string

localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet’s configured seccomp profile location. Must be set if type is "Localhost". Must NOT be set for any other type.

type

string

type indicates which kind of seccomp profile will be applied. Valid options are:

Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied.

Possible enum values: - "Localhost" indicates a profile defined in a file on the node should be used. The file’s location relative to <kubelet-root-dir>/seccomp. - "RuntimeDefault" represents the default container runtime seccomp profile. - "Unconfined" indicates no seccomp profile is applied (A.K.A. unconfined).

.spec.containers[].securityContext.windowsOptions

Description

WindowsSecurityContextOptions contain Windows-specific options and credentials.

Type

object

Property Type Description

gmsaCredentialSpec

string

GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field.

gmsaCredentialSpecName

string

GMSACredentialSpecName is the name of the GMSA credential spec to use.

hostProcess

boolean

HostProcess determines if a container should be run as a 'Host Process' container. All of a Pod’s containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true.

runAsUserName

string

The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.

.spec.containers[].startupProbe

Description

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

failureThreshold

integer

Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.

grpc

object

GRPC specifies an action involving a GRPC port.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

initialDelaySeconds

integer

Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

periodSeconds

integer

How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.

successThreshold

integer

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

terminationGracePeriodSeconds

integer

Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.

timeoutSeconds

integer

Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

.spec.containers[].startupProbe.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.containers[].startupProbe.grpc

Description

GRPC specifies an action involving a GRPC port.

Type

object

Required
  • port

Property Type Description

port

integer

Port number of the gRPC service. Number must be in the range 1 to 65535.

service

string

Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

If this is not specified, the default behavior is defined by gRPC.

.spec.containers[].startupProbe.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.containers[].startupProbe.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.containers[].startupProbe.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.containers[].startupProbe.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.containers[].volumeDevices

Description

volumeDevices is the list of block devices to be used by the container.

Type

array

.spec.containers[].volumeDevices[]

Description

volumeDevice describes a mapping of a raw block device within a container.

Type

object

Required
  • name

  • devicePath

Property Type Description

devicePath

string

devicePath is the path inside of the container that the device will be mapped to.

name

string

name must match the name of a persistentVolumeClaim in the pod

.spec.containers[].volumeMounts

Description

Pod volumes to mount into the container’s filesystem. Cannot be updated.

Type

array

.spec.containers[].volumeMounts[]

Description

VolumeMount describes a mounting of a Volume within a container.

Type

object

Required
  • name

  • mountPath

Property Type Description

mountPath

string

Path within the container at which the volume should be mounted. Must not contain ':'.

mountPropagation

string

mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10.

Possible enum values: - "Bidirectional" means that the volume in a container will receive new mounts from the host or other containers, and its own mounts will be propagated from the container to the host or other containers. Note that this mode is recursively applied to all mounts in the volume ("rshared" in Linux terminology). - "HostToContainer" means that the volume in a container will receive new mounts from the host or other containers, but filesystems mounted inside the container won’t be propagated to the host or other containers. Note that this mode is recursively applied to all mounts in the volume ("rslave" in Linux terminology). - "None" means that the volume in a container will not receive new mounts from the host or other containers, and filesystems mounted inside the container won’t be propagated to the host or other containers. Note that this mode corresponds to "private" in Linux terminology.

name

string

This must match the Name of a Volume.

readOnly

boolean

Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false.

subPath

string

Path within the volume from which the container’s volume should be mounted. Defaults to "" (volume’s root).

subPathExpr

string

Expanded path within the volume from which the container’s volume should be mounted. Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container’s environment. Defaults to "" (volume’s root). SubPathExpr and SubPath are mutually exclusive.

.spec.dnsConfig

Description

PodDNSConfig defines the DNS parameters of a pod in addition to those generated from DNSPolicy.

Type

object

Property Type Description

nameservers

array (string)

A list of DNS name server IP addresses. This will be appended to the base nameservers generated from DNSPolicy. Duplicated nameservers will be removed.

options

array

A list of DNS resolver options. This will be merged with the base options generated from DNSPolicy. Duplicated entries will be removed. Resolution options given in Options will override those that appear in the base DNSPolicy.

options[]

object

PodDNSConfigOption defines DNS resolver options of a pod.

searches

array (string)

A list of DNS search domains for host-name lookup. This will be appended to the base search paths generated from DNSPolicy. Duplicated search paths will be removed.

.spec.dnsConfig.options

Description

A list of DNS resolver options. This will be merged with the base options generated from DNSPolicy. Duplicated entries will be removed. Resolution options given in Options will override those that appear in the base DNSPolicy.

Type

array

.spec.dnsConfig.options[]

Description

PodDNSConfigOption defines DNS resolver options of a pod.

Type

object

Property Type Description

name

string

Required.

value

string

.spec.ephemeralContainers

Description

List of ephemeral containers run in this pod. Ephemeral containers may be run in an existing pod to perform user-initiated actions such as debugging. This list cannot be specified when creating a pod, and it cannot be modified by updating the pod spec. In order to add an ephemeral container to an existing pod, use the pod’s ephemeralcontainers subresource.

Type

array

.spec.ephemeralContainers[]

Description

An EphemeralContainer is a temporary container that you may add to an existing Pod for user-initiated activities such as debugging. Ephemeral containers have no resource or scheduling guarantees, and they will not be restarted when they exit or when a Pod is removed or restarted. The kubelet may evict a Pod if an ephemeral container causes the Pod to exceed its resource allocation.

To add an ephemeral container, use the ephemeralcontainers subresource of an existing Pod. Ephemeral containers may not be removed or restarted.

Type

object

Required
  • name

Property Type Description

args

array (string)

Arguments to the entrypoint. The image’s CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell

command

array (string)

Entrypoint array. Not executed within a shell. The image’s ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell

env

array

List of environment variables to set in the container. Cannot be updated.

env[]

object

EnvVar represents an environment variable present in a Container.

envFrom

array

List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated.

envFrom[]

object

EnvFromSource represents the source of a set of ConfigMaps

image

string

Container image name. More info: https://kubernetes.io/docs/concepts/containers/images

imagePullPolicy

string

Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images

Possible enum values: - "Always" means that kubelet always attempts to pull the latest image. Container will fail If the pull fails. - "IfNotPresent" means that kubelet pulls if the image isn’t present on disk. Container will fail if the image isn’t present and the pull fails. - "Never" means that kubelet never pulls an image, but only uses a local image. Container will fail if the image isn’t present

lifecycle

object

Lifecycle describes actions that the management system should take in response to container lifecycle events. For the PostStart and PreStop lifecycle handlers, management of the container blocks until the action is complete, unless the container process fails, in which case the handler is aborted.

livenessProbe

object

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

name

string

Name of the ephemeral container specified as a DNS_LABEL. This name must be unique among all containers, init containers and ephemeral containers.

ports

array

Ports are not allowed for ephemeral containers.

ports[]

object

ContainerPort represents a network port in a single container.

readinessProbe

object

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

resizePolicy

array

Resources resize policy for the container.

resizePolicy[]

object

ContainerResizePolicy represents resource resize policy for the container.

resources

object

ResourceRequirements describes the compute resource requirements.

restartPolicy

string

Restart policy for the container to manage the restart behavior of each container within a pod. This may only be set for init containers. You cannot set this field on ephemeral containers.

securityContext

object

SecurityContext holds security configuration that will be applied to a container. Some fields are present in both SecurityContext and PodSecurityContext. When both are set, the values in SecurityContext take precedence.

startupProbe

object

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

stdin

boolean

Whether this container should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the container will always result in EOF. Default is false.

stdinOnce

boolean

Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false

targetContainerName

string

If set, the name of the container from PodSpec that this ephemeral container targets. The ephemeral container will be run in the namespaces (IPC, PID, etc) of this container. If not set then the ephemeral container uses the namespaces configured in the Pod spec.

The container runtime must implement support for this feature. If the runtime does not support namespace targeting then the result of setting this field is undefined.

terminationMessagePath

string

Optional: Path at which the file to which the container’s termination message will be written is mounted into the container’s filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated.

terminationMessagePolicy

string

Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.

Possible enum values: - "FallbackToLogsOnError" will read the most recent contents of the container logs for the container status message when the container exits with an error and the terminationMessagePath has no contents. - "File" is the default behavior and will set the container status message to the contents of the container’s terminationMessagePath when the container exits.

tty

boolean

Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. Default is false.

volumeDevices

array

volumeDevices is the list of block devices to be used by the container.

volumeDevices[]

object

volumeDevice describes a mapping of a raw block device within a container.

volumeMounts

array

Pod volumes to mount into the container’s filesystem. Subpath mounts are not allowed for ephemeral containers. Cannot be updated.

volumeMounts[]

object

VolumeMount describes a mounting of a Volume within a container.

workingDir

string

Container’s working directory. If not specified, the container runtime’s default will be used, which might be configured in the container image. Cannot be updated.

.spec.ephemeralContainers[].env

Description

List of environment variables to set in the container. Cannot be updated.

Type

array

.spec.ephemeralContainers[].env[]

Description

EnvVar represents an environment variable present in a Container.

Type

object

Required
  • name

Property Type Description

name

string

Name of the environment variable. Must be a C_IDENTIFIER.

value

string

Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".

valueFrom

object

EnvVarSource represents a source for the value of an EnvVar.

.spec.ephemeralContainers[].env[].valueFrom

Description

EnvVarSource represents a source for the value of an EnvVar.

Type

object

Property Type Description

configMapKeyRef

object

Selects a key from a ConfigMap.

fieldRef

object

ObjectFieldSelector selects an APIVersioned field of an object.

resourceFieldRef

object

ResourceFieldSelector represents container resources (cpu, memory) and their output format

secretKeyRef

object

SecretKeySelector selects a key of a Secret.

.spec.ephemeralContainers[].env[].valueFrom.configMapKeyRef

Description

Selects a key from a ConfigMap.

Type

object

Required
  • key

Property Type Description

key

string

The key to select.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

Specify whether the ConfigMap or its key must be defined

.spec.ephemeralContainers[].env[].valueFrom.fieldRef

Description

ObjectFieldSelector selects an APIVersioned field of an object.

Type

object

Required
  • fieldPath

Property Type Description

apiVersion

string

Version of the schema the FieldPath is written in terms of, defaults to "v1".

fieldPath

string

Path of the field to select in the specified API version.

.spec.ephemeralContainers[].env[].valueFrom.resourceFieldRef

Description

ResourceFieldSelector represents container resources (cpu, memory) and their output format

Type

object

Required
  • resource

Property Type Description

containerName

string

Container name: required for volumes, optional for env vars

divisor

Quantity

Specifies the output format of the exposed resources, defaults to "1"

resource

string

Required: resource to select

.spec.ephemeralContainers[].env[].valueFrom.secretKeyRef

Description

SecretKeySelector selects a key of a Secret.

Type

object

Required
  • key

Property Type Description

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

Specify whether the Secret or its key must be defined

.spec.ephemeralContainers[].envFrom

Description

List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated.

Type

array

.spec.ephemeralContainers[].envFrom[]

Description

EnvFromSource represents the source of a set of ConfigMaps

Type

object

Property Type Description

configMapRef

object

ConfigMapEnvSource selects a ConfigMap to populate the environment variables with.

The contents of the target ConfigMap’s Data field will represent the key-value pairs as environment variables.

prefix

string

An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER.

secretRef

object

SecretEnvSource selects a Secret to populate the environment variables with.

The contents of the target Secret’s Data field will represent the key-value pairs as environment variables.

.spec.ephemeralContainers[].envFrom[].configMapRef

Description

ConfigMapEnvSource selects a ConfigMap to populate the environment variables with.

The contents of the target ConfigMap’s Data field will represent the key-value pairs as environment variables.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

Specify whether the ConfigMap must be defined

.spec.ephemeralContainers[].envFrom[].secretRef

Description

SecretEnvSource selects a Secret to populate the environment variables with.

The contents of the target Secret’s Data field will represent the key-value pairs as environment variables.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

Specify whether the Secret must be defined

.spec.ephemeralContainers[].lifecycle

Description

Lifecycle describes actions that the management system should take in response to container lifecycle events. For the PostStart and PreStop lifecycle handlers, management of the container blocks until the action is complete, unless the container process fails, in which case the handler is aborted.

Type

object

Property Type Description

postStart

object

LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.

preStop

object

LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.

.spec.ephemeralContainers[].lifecycle.postStart

Description

LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

.spec.ephemeralContainers[].lifecycle.postStart.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.ephemeralContainers[].lifecycle.postStart.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.ephemeralContainers[].lifecycle.postStart.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.ephemeralContainers[].lifecycle.postStart.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.ephemeralContainers[].lifecycle.postStart.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.ephemeralContainers[].lifecycle.preStop

Description

LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

.spec.ephemeralContainers[].lifecycle.preStop.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.ephemeralContainers[].lifecycle.preStop.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.ephemeralContainers[].lifecycle.preStop.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.ephemeralContainers[].lifecycle.preStop.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.ephemeralContainers[].lifecycle.preStop.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.ephemeralContainers[].livenessProbe

Description

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

failureThreshold

integer

Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.

grpc

object

GRPC specifies an action involving a GRPC port.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

initialDelaySeconds

integer

Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

periodSeconds

integer

How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.

successThreshold

integer

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

terminationGracePeriodSeconds

integer

Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.

timeoutSeconds

integer

Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

.spec.ephemeralContainers[].livenessProbe.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.ephemeralContainers[].livenessProbe.grpc

Description

GRPC specifies an action involving a GRPC port.

Type

object

Required
  • port

Property Type Description

port

integer

Port number of the gRPC service. Number must be in the range 1 to 65535.

service

string

Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

If this is not specified, the default behavior is defined by gRPC.

.spec.ephemeralContainers[].livenessProbe.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.ephemeralContainers[].livenessProbe.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.ephemeralContainers[].livenessProbe.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.ephemeralContainers[].livenessProbe.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.ephemeralContainers[].ports

Description

Ports are not allowed for ephemeral containers.

Type

array

.spec.ephemeralContainers[].ports[]

Description

ContainerPort represents a network port in a single container.

Type

object

Required
  • containerPort

Property Type Description

containerPort

integer

Number of port to expose on the pod’s IP address. This must be a valid port number, 0 < x < 65536.

hostIP

string

What host IP to bind the external port to.

hostPort

integer

Number of port to expose on the host. If specified, this must be a valid port number, 0 < x < 65536. If HostNetwork is specified, this must match ContainerPort. Most containers do not need this.

name

string

If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services.

protocol

string

Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP".

Possible enum values: - "SCTP" is the SCTP protocol. - "TCP" is the TCP protocol. - "UDP" is the UDP protocol.

.spec.ephemeralContainers[].readinessProbe

Description

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

failureThreshold

integer

Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.

grpc

object

GRPC specifies an action involving a GRPC port.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

initialDelaySeconds

integer

Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

periodSeconds

integer

How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.

successThreshold

integer

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

terminationGracePeriodSeconds

integer

Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.

timeoutSeconds

integer

Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

.spec.ephemeralContainers[].readinessProbe.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.ephemeralContainers[].readinessProbe.grpc

Description

GRPC specifies an action involving a GRPC port.

Type

object

Required
  • port

Property Type Description

port

integer

Port number of the gRPC service. Number must be in the range 1 to 65535.

service

string

Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

If this is not specified, the default behavior is defined by gRPC.

.spec.ephemeralContainers[].readinessProbe.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.ephemeralContainers[].readinessProbe.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.ephemeralContainers[].readinessProbe.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.ephemeralContainers[].readinessProbe.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.ephemeralContainers[].resizePolicy

Description

Resources resize policy for the container.

Type

array

.spec.ephemeralContainers[].resizePolicy[]

Description

ContainerResizePolicy represents resource resize policy for the container.

Type

object

Required
  • resourceName

  • restartPolicy

Property Type Description

resourceName

string

Name of the resource to which this resource resize policy applies. Supported values: cpu, memory.

restartPolicy

string

Restart policy to apply when specified resource is resized. If not specified, it defaults to NotRequired.

.spec.ephemeralContainers[].resources

Description

ResourceRequirements describes the compute resource requirements.

Type

object

Property Type Description

claims

array

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable. It can only be set for containers.

claims[]

object

ResourceClaim references one entry in PodSpec.ResourceClaims.

limits

object (Quantity)

Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

requests

object (Quantity)

Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

.spec.ephemeralContainers[].resources.claims

Description

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable. It can only be set for containers.

Type

array

.spec.ephemeralContainers[].resources.claims[]

Description

ResourceClaim references one entry in PodSpec.ResourceClaims.

Type

object

Required
  • name

Property Type Description

name

string

Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.

.spec.ephemeralContainers[].securityContext

Description

SecurityContext holds security configuration that will be applied to a container. Some fields are present in both SecurityContext and PodSecurityContext. When both are set, the values in SecurityContext take precedence.

Type

object

Property Type Description

allowPrivilegeEscalation

boolean

AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is: 1) run as Privileged 2) has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows.

capabilities

object

Adds and removes POSIX capabilities from running containers.

privileged

boolean

Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows.

procMount

string

procMount denotes the type of proc mount to use for the containers. The default is DefaultProcMount which uses the container runtime defaults for readonly paths and masked paths. This requires the ProcMountType feature flag to be enabled. Note that this field cannot be set when spec.os.name is windows.

Possible enum values: - "Default" uses the container runtime defaults for readonly and masked paths for /proc. Most container runtimes mask certain paths in /proc to avoid accidental security exposure of special devices or information. - "Unmasked" bypasses the default masking behavior of the container runtime and ensures the newly created /proc the container stays in tact with no modifications.

readOnlyRootFilesystem

boolean

Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows.

runAsGroup

integer

The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.

runAsNonRoot

boolean

Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.

runAsUser

integer

The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.

seLinuxOptions

object

SELinuxOptions are the labels to be applied to the container

seccompProfile

object

SeccompProfile defines a pod/container’s seccomp profile settings. Only one profile source may be set.

windowsOptions

object

WindowsSecurityContextOptions contain Windows-specific options and credentials.

.spec.ephemeralContainers[].securityContext.capabilities

Description

Adds and removes POSIX capabilities from running containers.

Type

object

Property Type Description

add

array (string)

Added capabilities

drop

array (string)

Removed capabilities

.spec.ephemeralContainers[].securityContext.seLinuxOptions

Description

SELinuxOptions are the labels to be applied to the container

Type

object

Property Type Description

level

string

Level is SELinux level label that applies to the container.

role

string

Role is a SELinux role label that applies to the container.

type

string

Type is a SELinux type label that applies to the container.

user

string

User is a SELinux user label that applies to the container.

.spec.ephemeralContainers[].securityContext.seccompProfile

Description

SeccompProfile defines a pod/container’s seccomp profile settings. Only one profile source may be set.

Type

object

Required
  • type

Property Type Description

localhostProfile

string

localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet’s configured seccomp profile location. Must be set if type is "Localhost". Must NOT be set for any other type.

type

string

type indicates which kind of seccomp profile will be applied. Valid options are:

Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied.

Possible enum values: - "Localhost" indicates a profile defined in a file on the node should be used. The file’s location relative to <kubelet-root-dir>/seccomp. - "RuntimeDefault" represents the default container runtime seccomp profile. - "Unconfined" indicates no seccomp profile is applied (A.K.A. unconfined).

.spec.ephemeralContainers[].securityContext.windowsOptions

Description

WindowsSecurityContextOptions contain Windows-specific options and credentials.

Type

object

Property Type Description

gmsaCredentialSpec

string

GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field.

gmsaCredentialSpecName

string

GMSACredentialSpecName is the name of the GMSA credential spec to use.

hostProcess

boolean

HostProcess determines if a container should be run as a 'Host Process' container. All of a Pod’s containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true.

runAsUserName

string

The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.

.spec.ephemeralContainers[].startupProbe

Description

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

failureThreshold

integer

Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.

grpc

object

GRPC specifies an action involving a GRPC port.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

initialDelaySeconds

integer

Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

periodSeconds

integer

How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.

successThreshold

integer

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

terminationGracePeriodSeconds

integer

Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.

timeoutSeconds

integer

Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

.spec.ephemeralContainers[].startupProbe.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.ephemeralContainers[].startupProbe.grpc

Description

GRPC specifies an action involving a GRPC port.

Type

object

Required
  • port

Property Type Description

port

integer

Port number of the gRPC service. Number must be in the range 1 to 65535.

service

string

Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

If this is not specified, the default behavior is defined by gRPC.

.spec.ephemeralContainers[].startupProbe.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.ephemeralContainers[].startupProbe.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.ephemeralContainers[].startupProbe.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.ephemeralContainers[].startupProbe.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.ephemeralContainers[].volumeDevices

Description

volumeDevices is the list of block devices to be used by the container.

Type

array

.spec.ephemeralContainers[].volumeDevices[]

Description

volumeDevice describes a mapping of a raw block device within a container.

Type

object

Required
  • name

  • devicePath

Property Type Description

devicePath

string

devicePath is the path inside of the container that the device will be mapped to.

name

string

name must match the name of a persistentVolumeClaim in the pod

.spec.ephemeralContainers[].volumeMounts

Description

Pod volumes to mount into the container’s filesystem. Subpath mounts are not allowed for ephemeral containers. Cannot be updated.

Type

array

.spec.ephemeralContainers[].volumeMounts[]

Description

VolumeMount describes a mounting of a Volume within a container.

Type

object

Required
  • name

  • mountPath

Property Type Description

mountPath

string

Path within the container at which the volume should be mounted. Must not contain ':'.

mountPropagation

string

mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10.

Possible enum values: - "Bidirectional" means that the volume in a container will receive new mounts from the host or other containers, and its own mounts will be propagated from the container to the host or other containers. Note that this mode is recursively applied to all mounts in the volume ("rshared" in Linux terminology). - "HostToContainer" means that the volume in a container will receive new mounts from the host or other containers, but filesystems mounted inside the container won’t be propagated to the host or other containers. Note that this mode is recursively applied to all mounts in the volume ("rslave" in Linux terminology). - "None" means that the volume in a container will not receive new mounts from the host or other containers, and filesystems mounted inside the container won’t be propagated to the host or other containers. Note that this mode corresponds to "private" in Linux terminology.

name

string

This must match the Name of a Volume.

readOnly

boolean

Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false.

subPath

string

Path within the volume from which the container’s volume should be mounted. Defaults to "" (volume’s root).

subPathExpr

string

Expanded path within the volume from which the container’s volume should be mounted. Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container’s environment. Defaults to "" (volume’s root). SubPathExpr and SubPath are mutually exclusive.

.spec.hostAliases

Description

HostAliases is an optional list of hosts and IPs that will be injected into the pod’s hosts file if specified. This is only valid for non-hostNetwork pods.

Type

array

.spec.hostAliases[]

Description

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file.

Type

object

Property Type Description

hostnames

array (string)

Hostnames for the above IP address.

ip

string

IP address of the host file entry.

.spec.imagePullSecrets

Description

ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. If specified, these secrets will be passed to individual puller implementations for them to use. More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod

Type

array

.spec.imagePullSecrets[]

Description

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

.spec.initContainers

Description

List of initialization containers belonging to the pod. Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion. Init containers cannot currently be added or removed. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/

Type

array

.spec.initContainers[]

Description

A single application container that you want to run within a pod.

Type

object

Required
  • name

Property Type Description

args

array (string)

Arguments to the entrypoint. The container image’s CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell

command

array (string)

Entrypoint array. Not executed within a shell. The container image’s ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell

env

array

List of environment variables to set in the container. Cannot be updated.

env[]

object

EnvVar represents an environment variable present in a Container.

envFrom

array

List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated.

envFrom[]

object

EnvFromSource represents the source of a set of ConfigMaps

image

string

Container image name. More info: https://kubernetes.io/docs/concepts/containers/images This field is optional to allow higher level config management to default or override container images in workload controllers like Deployments and StatefulSets.

imagePullPolicy

string

Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images

Possible enum values: - "Always" means that kubelet always attempts to pull the latest image. Container will fail If the pull fails. - "IfNotPresent" means that kubelet pulls if the image isn’t present on disk. Container will fail if the image isn’t present and the pull fails. - "Never" means that kubelet never pulls an image, but only uses a local image. Container will fail if the image isn’t present

lifecycle

object

Lifecycle describes actions that the management system should take in response to container lifecycle events. For the PostStart and PreStop lifecycle handlers, management of the container blocks until the action is complete, unless the container process fails, in which case the handler is aborted.

livenessProbe

object

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

name

string

Name of the container specified as a DNS_LABEL. Each container in a pod must have a unique name (DNS_LABEL). Cannot be updated.

ports

array

List of ports to expose from the container. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Modifying this array with strategic merge patch may corrupt the data. For more information See https://github.com/kubernetes/kubernetes/issues/108255. Cannot be updated.

ports[]

object

ContainerPort represents a network port in a single container.

readinessProbe

object

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

resizePolicy

array

Resources resize policy for the container.

resizePolicy[]

object

ContainerResizePolicy represents resource resize policy for the container.

resources

object

ResourceRequirements describes the compute resource requirements.

restartPolicy

string

RestartPolicy defines the restart behavior of individual containers in a pod. This field may only be set for init containers, and the only allowed value is "Always". For non-init containers or when this field is not specified, the restart behavior is defined by the Pod’s restart policy and the container type. Setting the RestartPolicy as "Always" for the init container will have the following effect: this init container will be continually restarted on exit until all regular containers have terminated. Once all regular containers have completed, all init containers with restartPolicy "Always" will be shut down. This lifecycle differs from normal init containers and is often referred to as a "sidecar" container. Although this init container still starts in the init container sequence, it does not wait for the container to complete before proceeding to the next init container. Instead, the next init container starts immediately after this init container is started, or after any startupProbe has successfully completed.

securityContext

object

SecurityContext holds security configuration that will be applied to a container. Some fields are present in both SecurityContext and PodSecurityContext. When both are set, the values in SecurityContext take precedence.

startupProbe

object

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

stdin

boolean

Whether this container should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the container will always result in EOF. Default is false.

stdinOnce

boolean

Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false

terminationMessagePath

string

Optional: Path at which the file to which the container’s termination message will be written is mounted into the container’s filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated.

terminationMessagePolicy

string

Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.

Possible enum values: - "FallbackToLogsOnError" will read the most recent contents of the container logs for the container status message when the container exits with an error and the terminationMessagePath has no contents. - "File" is the default behavior and will set the container status message to the contents of the container’s terminationMessagePath when the container exits.

tty

boolean

Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. Default is false.

volumeDevices

array

volumeDevices is the list of block devices to be used by the container.

volumeDevices[]

object

volumeDevice describes a mapping of a raw block device within a container.

volumeMounts

array

Pod volumes to mount into the container’s filesystem. Cannot be updated.

volumeMounts[]

object

VolumeMount describes a mounting of a Volume within a container.

workingDir

string

Container’s working directory. If not specified, the container runtime’s default will be used, which might be configured in the container image. Cannot be updated.

.spec.initContainers[].env

Description

List of environment variables to set in the container. Cannot be updated.

Type

array

.spec.initContainers[].env[]

Description

EnvVar represents an environment variable present in a Container.

Type

object

Required
  • name

Property Type Description

name

string

Name of the environment variable. Must be a C_IDENTIFIER.

value

string

Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".

valueFrom

object

EnvVarSource represents a source for the value of an EnvVar.

.spec.initContainers[].env[].valueFrom

Description

EnvVarSource represents a source for the value of an EnvVar.

Type

object

Property Type Description

configMapKeyRef

object

Selects a key from a ConfigMap.

fieldRef

object

ObjectFieldSelector selects an APIVersioned field of an object.

resourceFieldRef

object

ResourceFieldSelector represents container resources (cpu, memory) and their output format

secretKeyRef

object

SecretKeySelector selects a key of a Secret.

.spec.initContainers[].env[].valueFrom.configMapKeyRef

Description

Selects a key from a ConfigMap.

Type

object

Required
  • key

Property Type Description

key

string

The key to select.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

Specify whether the ConfigMap or its key must be defined

.spec.initContainers[].env[].valueFrom.fieldRef

Description

ObjectFieldSelector selects an APIVersioned field of an object.

Type

object

Required
  • fieldPath

Property Type Description

apiVersion

string

Version of the schema the FieldPath is written in terms of, defaults to "v1".

fieldPath

string

Path of the field to select in the specified API version.

.spec.initContainers[].env[].valueFrom.resourceFieldRef

Description

ResourceFieldSelector represents container resources (cpu, memory) and their output format

Type

object

Required
  • resource

Property Type Description

containerName

string

Container name: required for volumes, optional for env vars

divisor

Quantity

Specifies the output format of the exposed resources, defaults to "1"

resource

string

Required: resource to select

.spec.initContainers[].env[].valueFrom.secretKeyRef

Description

SecretKeySelector selects a key of a Secret.

Type

object

Required
  • key

Property Type Description

key

string

The key of the secret to select from. Must be a valid secret key.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

Specify whether the Secret or its key must be defined

.spec.initContainers[].envFrom

Description

List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated.

Type

array

.spec.initContainers[].envFrom[]

Description

EnvFromSource represents the source of a set of ConfigMaps

Type

object

Property Type Description

configMapRef

object

ConfigMapEnvSource selects a ConfigMap to populate the environment variables with.

The contents of the target ConfigMap’s Data field will represent the key-value pairs as environment variables.

prefix

string

An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER.

secretRef

object

SecretEnvSource selects a Secret to populate the environment variables with.

The contents of the target Secret’s Data field will represent the key-value pairs as environment variables.

.spec.initContainers[].envFrom[].configMapRef

Description

ConfigMapEnvSource selects a ConfigMap to populate the environment variables with.

The contents of the target ConfigMap’s Data field will represent the key-value pairs as environment variables.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

Specify whether the ConfigMap must be defined

.spec.initContainers[].envFrom[].secretRef

Description

SecretEnvSource selects a Secret to populate the environment variables with.

The contents of the target Secret’s Data field will represent the key-value pairs as environment variables.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

Specify whether the Secret must be defined

.spec.initContainers[].lifecycle

Description

Lifecycle describes actions that the management system should take in response to container lifecycle events. For the PostStart and PreStop lifecycle handlers, management of the container blocks until the action is complete, unless the container process fails, in which case the handler is aborted.

Type

object

Property Type Description

postStart

object

LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.

preStop

object

LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.

.spec.initContainers[].lifecycle.postStart

Description

LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

.spec.initContainers[].lifecycle.postStart.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.initContainers[].lifecycle.postStart.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.initContainers[].lifecycle.postStart.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.initContainers[].lifecycle.postStart.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.initContainers[].lifecycle.postStart.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.initContainers[].lifecycle.preStop

Description

LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

.spec.initContainers[].lifecycle.preStop.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.initContainers[].lifecycle.preStop.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.initContainers[].lifecycle.preStop.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.initContainers[].lifecycle.preStop.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.initContainers[].lifecycle.preStop.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.initContainers[].livenessProbe

Description

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

failureThreshold

integer

Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.

grpc

object

GRPC specifies an action involving a GRPC port.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

initialDelaySeconds

integer

Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

periodSeconds

integer

How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.

successThreshold

integer

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

terminationGracePeriodSeconds

integer

Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.

timeoutSeconds

integer

Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

.spec.initContainers[].livenessProbe.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.initContainers[].livenessProbe.grpc

Description

GRPC specifies an action involving a GRPC port.

Type

object

Required
  • port

Property Type Description

port

integer

Port number of the gRPC service. Number must be in the range 1 to 65535.

service

string

Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

If this is not specified, the default behavior is defined by gRPC.

.spec.initContainers[].livenessProbe.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.initContainers[].livenessProbe.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.initContainers[].livenessProbe.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.initContainers[].livenessProbe.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.initContainers[].ports

Description

List of ports to expose from the container. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Modifying this array with strategic merge patch may corrupt the data. For more information See https://github.com/kubernetes/kubernetes/issues/108255. Cannot be updated.

Type

array

.spec.initContainers[].ports[]

Description

ContainerPort represents a network port in a single container.

Type

object

Required
  • containerPort

Property Type Description

containerPort

integer

Number of port to expose on the pod’s IP address. This must be a valid port number, 0 < x < 65536.

hostIP

string

What host IP to bind the external port to.

hostPort

integer

Number of port to expose on the host. If specified, this must be a valid port number, 0 < x < 65536. If HostNetwork is specified, this must match ContainerPort. Most containers do not need this.

name

string

If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services.

protocol

string

Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP".

Possible enum values: - "SCTP" is the SCTP protocol. - "TCP" is the TCP protocol. - "UDP" is the UDP protocol.

.spec.initContainers[].readinessProbe

Description

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

failureThreshold

integer

Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.

grpc

object

GRPC specifies an action involving a GRPC port.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

initialDelaySeconds

integer

Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

periodSeconds

integer

How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.

successThreshold

integer

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

terminationGracePeriodSeconds

integer

Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.

timeoutSeconds

integer

Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

.spec.initContainers[].readinessProbe.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.initContainers[].readinessProbe.grpc

Description

GRPC specifies an action involving a GRPC port.

Type

object

Required
  • port

Property Type Description

port

integer

Port number of the gRPC service. Number must be in the range 1 to 65535.

service

string

Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

If this is not specified, the default behavior is defined by gRPC.

.spec.initContainers[].readinessProbe.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.initContainers[].readinessProbe.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.initContainers[].readinessProbe.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.initContainers[].readinessProbe.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.initContainers[].resizePolicy

Description

Resources resize policy for the container.

Type

array

.spec.initContainers[].resizePolicy[]

Description

ContainerResizePolicy represents resource resize policy for the container.

Type

object

Required
  • resourceName

  • restartPolicy

Property Type Description

resourceName

string

Name of the resource to which this resource resize policy applies. Supported values: cpu, memory.

restartPolicy

string

Restart policy to apply when specified resource is resized. If not specified, it defaults to NotRequired.

.spec.initContainers[].resources

Description

ResourceRequirements describes the compute resource requirements.

Type

object

Property Type Description

claims

array

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable. It can only be set for containers.

claims[]

object

ResourceClaim references one entry in PodSpec.ResourceClaims.

limits

object (Quantity)

Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

requests

object (Quantity)

Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

.spec.initContainers[].resources.claims

Description

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable. It can only be set for containers.

Type

array

.spec.initContainers[].resources.claims[]

Description

ResourceClaim references one entry in PodSpec.ResourceClaims.

Type

object

Required
  • name

Property Type Description

name

string

Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.

.spec.initContainers[].securityContext

Description

SecurityContext holds security configuration that will be applied to a container. Some fields are present in both SecurityContext and PodSecurityContext. When both are set, the values in SecurityContext take precedence.

Type

object

Property Type Description

allowPrivilegeEscalation

boolean

AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is: 1) run as Privileged 2) has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows.

capabilities

object

Adds and removes POSIX capabilities from running containers.

privileged

boolean

Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows.

procMount

string

procMount denotes the type of proc mount to use for the containers. The default is DefaultProcMount which uses the container runtime defaults for readonly paths and masked paths. This requires the ProcMountType feature flag to be enabled. Note that this field cannot be set when spec.os.name is windows.

Possible enum values: - "Default" uses the container runtime defaults for readonly and masked paths for /proc. Most container runtimes mask certain paths in /proc to avoid accidental security exposure of special devices or information. - "Unmasked" bypasses the default masking behavior of the container runtime and ensures the newly created /proc the container stays in tact with no modifications.

readOnlyRootFilesystem

boolean

Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows.

runAsGroup

integer

The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.

runAsNonRoot

boolean

Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.

runAsUser

integer

The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.

seLinuxOptions

object

SELinuxOptions are the labels to be applied to the container

seccompProfile

object

SeccompProfile defines a pod/container’s seccomp profile settings. Only one profile source may be set.

windowsOptions

object

WindowsSecurityContextOptions contain Windows-specific options and credentials.

.spec.initContainers[].securityContext.capabilities

Description

Adds and removes POSIX capabilities from running containers.

Type

object

Property Type Description

add

array (string)

Added capabilities

drop

array (string)

Removed capabilities

.spec.initContainers[].securityContext.seLinuxOptions

Description

SELinuxOptions are the labels to be applied to the container

Type

object

Property Type Description

level

string

Level is SELinux level label that applies to the container.

role

string

Role is a SELinux role label that applies to the container.

type

string

Type is a SELinux type label that applies to the container.

user

string

User is a SELinux user label that applies to the container.

.spec.initContainers[].securityContext.seccompProfile

Description

SeccompProfile defines a pod/container’s seccomp profile settings. Only one profile source may be set.

Type

object

Required
  • type

Property Type Description

localhostProfile

string

localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet’s configured seccomp profile location. Must be set if type is "Localhost". Must NOT be set for any other type.

type

string

type indicates which kind of seccomp profile will be applied. Valid options are:

Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied.

Possible enum values: - "Localhost" indicates a profile defined in a file on the node should be used. The file’s location relative to <kubelet-root-dir>/seccomp. - "RuntimeDefault" represents the default container runtime seccomp profile. - "Unconfined" indicates no seccomp profile is applied (A.K.A. unconfined).

.spec.initContainers[].securityContext.windowsOptions

Description

WindowsSecurityContextOptions contain Windows-specific options and credentials.

Type

object

Property Type Description

gmsaCredentialSpec

string

GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field.

gmsaCredentialSpecName

string

GMSACredentialSpecName is the name of the GMSA credential spec to use.

hostProcess

boolean

HostProcess determines if a container should be run as a 'Host Process' container. All of a Pod’s containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true.

runAsUserName

string

The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.

.spec.initContainers[].startupProbe

Description

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

Type

object

Property Type Description

exec

object

ExecAction describes a "run in container" action.

failureThreshold

integer

Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.

grpc

object

GRPC specifies an action involving a GRPC port.

httpGet

object

HTTPGetAction describes an action based on HTTP Get requests.

initialDelaySeconds

integer

Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

periodSeconds

integer

How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.

successThreshold

integer

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.

tcpSocket

object

TCPSocketAction describes an action based on opening a socket

terminationGracePeriodSeconds

integer

Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod’s terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.

timeoutSeconds

integer

Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

.spec.initContainers[].startupProbe.exec

Description

ExecAction describes a "run in container" action.

Type

object

Property Type Description

command

array (string)

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem. The command is simply exec’d, it is not run inside a shell, so traditional shell instructions ('|', etc) won’t work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

.spec.initContainers[].startupProbe.grpc

Description

GRPC specifies an action involving a GRPC port.

Type

object

Required
  • port

Property Type Description

port

integer

Port number of the gRPC service. Number must be in the range 1 to 65535.

service

string

Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

If this is not specified, the default behavior is defined by gRPC.

.spec.initContainers[].startupProbe.httpGet

Description

HTTPGetAction describes an action based on HTTP Get requests.

Type

object

Required
  • port

Property Type Description

host

string

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

httpHeaders

array

Custom headers to set in the request. HTTP allows repeated headers.

httpHeaders[]

object

HTTPHeader describes a custom header to be used in HTTP probes

path

string

Path to access on the HTTP server.

port

IntOrString

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

scheme

string

Scheme to use for connecting to the host. Defaults to HTTP.

Possible enum values: - "HTTP" means that the scheme used will be http:// - "HTTPS" means that the scheme used will be https://

.spec.initContainers[].startupProbe.httpGet.httpHeaders

Description

Custom headers to set in the request. HTTP allows repeated headers.

Type

array

.spec.initContainers[].startupProbe.httpGet.httpHeaders[]

Description

HTTPHeader describes a custom header to be used in HTTP probes

Type

object

Required
  • name

  • value

Property Type Description

name

string

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

value

string

The header field value

.spec.initContainers[].startupProbe.tcpSocket

Description

TCPSocketAction describes an action based on opening a socket

Type

object

Required
  • port

Property Type Description

host

string

Optional: Host name to connect to, defaults to the pod IP.

port

IntOrString

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

.spec.initContainers[].volumeDevices

Description

volumeDevices is the list of block devices to be used by the container.

Type

array

.spec.initContainers[].volumeDevices[]

Description

volumeDevice describes a mapping of a raw block device within a container.

Type

object

Required
  • name

  • devicePath

Property Type Description

devicePath

string

devicePath is the path inside of the container that the device will be mapped to.

name

string

name must match the name of a persistentVolumeClaim in the pod

.spec.initContainers[].volumeMounts

Description

Pod volumes to mount into the container’s filesystem. Cannot be updated.

Type

array

.spec.initContainers[].volumeMounts[]

Description

VolumeMount describes a mounting of a Volume within a container.

Type

object

Required
  • name

  • mountPath

Property Type Description

mountPath

string

Path within the container at which the volume should be mounted. Must not contain ':'.

mountPropagation

string

mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10.

Possible enum values: - "Bidirectional" means that the volume in a container will receive new mounts from the host or other containers, and its own mounts will be propagated from the container to the host or other containers. Note that this mode is recursively applied to all mounts in the volume ("rshared" in Linux terminology). - "HostToContainer" means that the volume in a container will receive new mounts from the host or other containers, but filesystems mounted inside the container won’t be propagated to the host or other containers. Note that this mode is recursively applied to all mounts in the volume ("rslave" in Linux terminology). - "None" means that the volume in a container will not receive new mounts from the host or other containers, and filesystems mounted inside the container won’t be propagated to the host or other containers. Note that this mode corresponds to "private" in Linux terminology.

name

string

This must match the Name of a Volume.

readOnly

boolean

Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false.

subPath

string

Path within the volume from which the container’s volume should be mounted. Defaults to "" (volume’s root).

subPathExpr

string

Expanded path within the volume from which the container’s volume should be mounted. Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container’s environment. Defaults to "" (volume’s root). SubPathExpr and SubPath are mutually exclusive.

.spec.os

Description

PodOS defines the OS parameters of a pod.

Type

object

Required
  • name

Property Type Description

name

string

Name is the name of the operating system. The currently supported values are linux and windows. Additional value may be defined in future and can be one of: https://github.com/opencontainers/runtime-spec/blob/master/config.md#platform-specific-configuration Clients should expect to handle additional values and treat unrecognized values in this field as os: null

.spec.readinessGates

Description

If specified, all readiness gates will be evaluated for pod readiness. A pod is ready when all its containers are ready AND all conditions specified in the readiness gates have status equal to "True" More info: https://git.k8s.io/enhancements/keps/sig-network/580-pod-readiness-gates

Type

array

.spec.readinessGates[]

Description

PodReadinessGate contains the reference to a pod condition

Type

object

Required
  • conditionType

Property Type Description

conditionType

string

ConditionType refers to a condition in the pod’s condition list with matching type.

.spec.resourceClaims

Description

ResourceClaims defines which ResourceClaims must be allocated and reserved before the Pod is allowed to start. The resources will be made available to those containers which consume them by name.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable.

Type

array

.spec.resourceClaims[]

Description

PodResourceClaim references exactly one ResourceClaim through a ClaimSource. It adds a name to it that uniquely identifies the ResourceClaim inside the Pod. Containers that need access to the ResourceClaim reference it with this name.

Type

object

Required
  • name

Property Type Description

name

string

Name uniquely identifies this resource claim inside the pod. This must be a DNS_LABEL.

source

object

ClaimSource describes a reference to a ResourceClaim.

Exactly one of these fields should be set. Consumers of this type must treat an empty object as if it has an unknown value.

.spec.resourceClaims[].source

Description

ClaimSource describes a reference to a ResourceClaim.

Exactly one of these fields should be set. Consumers of this type must treat an empty object as if it has an unknown value.

Type

object

Property Type Description

resourceClaimName

string

ResourceClaimName is the name of a ResourceClaim object in the same namespace as this pod.

resourceClaimTemplateName

string

ResourceClaimTemplateName is the name of a ResourceClaimTemplate object in the same namespace as this pod.

The template will be used to create a new ResourceClaim, which will be bound to this pod. When this pod is deleted, the ResourceClaim will also be deleted. The pod name and resource name, along with a generated component, will be used to form a unique name for the ResourceClaim, which will be recorded in pod.status.resourceClaimStatuses.

This field is immutable and no changes will be made to the corresponding ResourceClaim by the control plane after creating the ResourceClaim.

.spec.schedulingGates

Description

SchedulingGates is an opaque list of values that if specified will block scheduling the pod. If schedulingGates is not empty, the pod will stay in the SchedulingGated state and the scheduler will not attempt to schedule the pod.

SchedulingGates can only be set at pod creation time, and be removed only afterwards.

This is a beta feature enabled by the PodSchedulingReadiness feature gate.

Type

array

.spec.schedulingGates[]

Description

PodSchedulingGate is associated to a Pod to guard its scheduling.

Type

object

Required
  • name

Property Type Description

name

string

Name of the scheduling gate. Each scheduling gate must have a unique name field.

.spec.securityContext

Description

PodSecurityContext holds pod-level security attributes and common container settings. Some fields are also present in container.securityContext. Field values of container.securityContext take precedence over field values of PodSecurityContext.

Type

object

Property Type Description

fsGroup

integer

A special supplemental group that applies to all containers in a pod. Some volume types allow the Kubelet to change the ownership of that volume to be owned by the pod:

1. The owning GID will be the FSGroup 2. The setgid bit is set (new files created in the volume will be owned by FSGroup) 3. The permission bits are OR’d with rw-rw----

If unset, the Kubelet will not modify the ownership and permissions of any volume. Note that this field cannot be set when spec.os.name is windows.

fsGroupChangePolicy

string

fsGroupChangePolicy defines behavior of changing ownership and permission of the volume before being exposed inside Pod. This field will only apply to volume types which support fsGroup based ownership(and permissions). It will have no effect on ephemeral volume types such as: secret, configmaps and emptydir. Valid values are "OnRootMismatch" and "Always". If not specified, "Always" is used. Note that this field cannot be set when spec.os.name is windows.

Possible enum values: - "Always" indicates that volume’s ownership and permissions should always be changed whenever volume is mounted inside a Pod. This the default behavior. - "OnRootMismatch" indicates that volume’s ownership and permissions will be changed only when permission and ownership of root directory does not match with expected permissions on the volume. This can help shorten the time it takes to change ownership and permissions of a volume.

runAsGroup

integer

The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence for that container. Note that this field cannot be set when spec.os.name is windows.

runAsNonRoot

boolean

Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.

runAsUser

integer

The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence for that container. Note that this field cannot be set when spec.os.name is windows.

seLinuxOptions

object

SELinuxOptions are the labels to be applied to the container

seccompProfile

object

SeccompProfile defines a pod/container’s seccomp profile settings. Only one profile source may be set.

supplementalGroups

array (integer)

A list of groups applied to the first process run in each container, in addition to the container’s primary GID, the fsGroup (if specified), and group memberships defined in the container image for the uid of the container process. If unspecified, no additional groups are added to any container. Note that group memberships defined in the container image for the uid of the container process are still effective, even if they are not included in this list. Note that this field cannot be set when spec.os.name is windows.

sysctls

array

Sysctls hold a list of namespaced sysctls used for the pod. Pods with unsupported sysctls (by the container runtime) might fail to launch. Note that this field cannot be set when spec.os.name is windows.

sysctls[]

object

Sysctl defines a kernel parameter to be set

windowsOptions

object

WindowsSecurityContextOptions contain Windows-specific options and credentials.

.spec.securityContext.seLinuxOptions

Description

SELinuxOptions are the labels to be applied to the container

Type

object

Property Type Description

level

string

Level is SELinux level label that applies to the container.

role

string

Role is a SELinux role label that applies to the container.

type

string

Type is a SELinux type label that applies to the container.

user

string

User is a SELinux user label that applies to the container.

.spec.securityContext.seccompProfile

Description

SeccompProfile defines a pod/container’s seccomp profile settings. Only one profile source may be set.

Type

object

Required
  • type

Property Type Description

localhostProfile

string

localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet’s configured seccomp profile location. Must be set if type is "Localhost". Must NOT be set for any other type.

type

string

type indicates which kind of seccomp profile will be applied. Valid options are:

Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied.

Possible enum values: - "Localhost" indicates a profile defined in a file on the node should be used. The file’s location relative to <kubelet-root-dir>/seccomp. - "RuntimeDefault" represents the default container runtime seccomp profile. - "Unconfined" indicates no seccomp profile is applied (A.K.A. unconfined).

.spec.securityContext.sysctls

Description

Sysctls hold a list of namespaced sysctls used for the pod. Pods with unsupported sysctls (by the container runtime) might fail to launch. Note that this field cannot be set when spec.os.name is windows.

Type

array

.spec.securityContext.sysctls[]

Description

Sysctl defines a kernel parameter to be set

Type

object

Required
  • name

  • value

Property Type Description

name

string

Name of a property to set

value

string

Value of a property to set

.spec.securityContext.windowsOptions

Description

WindowsSecurityContextOptions contain Windows-specific options and credentials.

Type

object

Property Type Description

gmsaCredentialSpec

string

GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field.

gmsaCredentialSpecName

string

GMSACredentialSpecName is the name of the GMSA credential spec to use.

hostProcess

boolean

HostProcess determines if a container should be run as a 'Host Process' container. All of a Pod’s containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true.

runAsUserName

string

The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.

.spec.tolerations

Description

If specified, the pod’s tolerations.

Type

array

.spec.tolerations[]

Description

The pod this Toleration is attached to tolerates any taint that matches the triple <key,value,effect> using the matching operator <operator>.

Type

object

Property Type Description

effect

string

Effect indicates the taint effect to match. Empty means match all taint effects. When specified, allowed values are NoSchedule, PreferNoSchedule and NoExecute.

Possible enum values: - "NoExecute" Evict any already-running pods that do not tolerate the taint. Currently enforced by NodeController. - "NoSchedule" Do not allow new pods to schedule onto the node unless they tolerate the taint, but allow all pods submitted to Kubelet without going through the scheduler to start, and allow all already-running pods to continue running. Enforced by the scheduler. - "PreferNoSchedule" Like TaintEffectNoSchedule, but the scheduler tries not to schedule new pods onto the node, rather than prohibiting new pods from scheduling onto the node entirely. Enforced by the scheduler.

key

string

Key is the taint key that the toleration applies to. Empty means match all taint keys. If the key is empty, operator must be Exists; this combination means to match all values and all keys.

operator

string

Operator represents a key’s relationship to the value. Valid operators are Exists and Equal. Defaults to Equal. Exists is equivalent to wildcard for value, so that a pod can tolerate all taints of a particular category.

Possible enum values: - "Equal" - "Exists"

tolerationSeconds

integer

TolerationSeconds represents the period of time the toleration (which must be of effect NoExecute, otherwise this field is ignored) tolerates the taint. By default, it is not set, which means tolerate the taint forever (do not evict). Zero and negative values will be treated as 0 (evict immediately) by the system.

value

string

Value is the taint value the toleration matches to. If the operator is Exists, the value should be empty, otherwise just a regular string.

.spec.topologySpreadConstraints

Description

TopologySpreadConstraints describes how a group of pods ought to spread across topology domains. Scheduler will schedule pods in a way which abides by the constraints. All topologySpreadConstraints are ANDed.

Type

array

.spec.topologySpreadConstraints[]

Description

TopologySpreadConstraint specifies how to spread matching pods among the given topology.

Type

object

Required
  • maxSkew

  • topologyKey

  • whenUnsatisfiable

Property Type Description

labelSelector

LabelSelector

LabelSelector is used to find matching pods. Pods that match this label selector are counted to determine the number of pods in their corresponding topology domain.

matchLabelKeys

array (string)

MatchLabelKeys is a set of pod label keys to select the pods over which spreading will be calculated. The keys are used to lookup values from the incoming pod labels, those key-value labels are ANDed with labelSelector to select the group of existing pods over which spreading will be calculated for the incoming pod. The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. MatchLabelKeys cannot be set when LabelSelector isn’t set. Keys that don’t exist in the incoming pod labels will be ignored. A null or empty list means only match against labelSelector.

This is a beta field and requires the MatchLabelKeysInPodTopologySpread feature gate to be enabled (enabled by default).

maxSkew

integer

MaxSkew describes the degree to which pods may be unevenly distributed. When whenUnsatisfiable=DoNotSchedule, it is the maximum permitted difference between the number of matching pods in the target topology and the global minimum. The global minimum is the minimum number of matching pods in an eligible domain or zero if the number of eligible domains is less than MinDomains. For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same labelSelector spread as 2/2/1: In this case, the global minimum is 1. | zone1 | zone2 | zone3 | | P P | P P | P | - if MaxSkew is 1, incoming pod can only be scheduled to zone3 to become 2/2/2; scheduling it onto zone1(zone2) would make the ActualSkew(3-1) on zone1(zone2) violate MaxSkew(1). - if MaxSkew is 2, incoming pod can be scheduled onto any zone. When whenUnsatisfiable=ScheduleAnyway, it is used to give higher precedence to topologies that satisfy it. It’s a required field. Default value is 1 and 0 is not allowed.

minDomains

integer

MinDomains indicates a minimum number of eligible domains. When the number of eligible domains with matching topology keys is less than minDomains, Pod Topology Spread treats "global minimum" as 0, and then the calculation of Skew is performed. And when the number of eligible domains with matching topology keys equals or greater than minDomains, this value has no effect on scheduling. As a result, when the number of eligible domains is less than minDomains, scheduler won’t schedule more than maxSkew Pods to those domains. If value is nil, the constraint behaves as if MinDomains is equal to 1. Valid values are integers greater than 0. When value is not nil, WhenUnsatisfiable must be DoNotSchedule.

For example, in a 3-zone cluster, MaxSkew is set to 2, MinDomains is set to 5 and pods with the same labelSelector spread as 2/2/2: | zone1 | zone2 | zone3 | | P P | P P | P P | The number of domains is less than 5(MinDomains), so "global minimum" is treated as 0. In this situation, new pod with the same labelSelector cannot be scheduled, because computed skew will be 3(3 - 0) if new Pod is scheduled to any of the three zones, it will violate MaxSkew.

This is a beta field and requires the MinDomainsInPodTopologySpread feature gate to be enabled (enabled by default).

nodeAffinityPolicy

string

NodeAffinityPolicy indicates how we will treat Pod’s nodeAffinity/nodeSelector when calculating pod topology spread skew. Options are: - Honor: only nodes matching nodeAffinity/nodeSelector are included in the calculations. - Ignore: nodeAffinity/nodeSelector are ignored. All nodes are included in the calculations.

If this value is nil, the behavior is equivalent to the Honor policy. This is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread feature flag.

Possible enum values: - "Honor" means use this scheduling directive when calculating pod topology spread skew. - "Ignore" means ignore this scheduling directive when calculating pod topology spread skew.

nodeTaintsPolicy

string

NodeTaintsPolicy indicates how we will treat node taints when calculating pod topology spread skew. Options are: - Honor: nodes without taints, along with tainted nodes for which the incoming pod has a toleration, are included. - Ignore: node taints are ignored. All nodes are included.

If this value is nil, the behavior is equivalent to the Ignore policy. This is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread feature flag.

Possible enum values: - "Honor" means use this scheduling directive when calculating pod topology spread skew. - "Ignore" means ignore this scheduling directive when calculating pod topology spread skew.

topologyKey

string

TopologyKey is the key of node labels. Nodes that have a label with this key and identical values are considered to be in the same topology. We consider each <key, value> as a "bucket", and try to put balanced number of pods into each bucket. We define a domain as a particular instance of a topology. Also, we define an eligible domain as a domain whose nodes meet the requirements of nodeAffinityPolicy and nodeTaintsPolicy. e.g. If TopologyKey is "kubernetes.io/hostname", each Node is a domain of that topology. And, if TopologyKey is "topology.kubernetes.io/zone", each zone is a domain of that topology. It’s a required field.

whenUnsatisfiable

string

WhenUnsatisfiable indicates how to deal with a pod if it doesn’t satisfy the spread constraint. - DoNotSchedule (default) tells the scheduler not to schedule it. - ScheduleAnyway tells the scheduler to schedule the pod in any location, but giving higher precedence to topologies that would help reduce the skew. A constraint is considered "Unsatisfiable" for an incoming pod if and only if every possible node assignment for that pod would violate "MaxSkew" on some topology. For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same labelSelector spread as 3/1/1: | zone1 | zone2 | zone3 | | P P P | P | P | If WhenUnsatisfiable is set to DoNotSchedule, incoming pod can only be scheduled to zone2(zone3) to become 3/2/1(3/1/2) as ActualSkew(2-1) on zone2(zone3) satisfies MaxSkew(1). In other words, the cluster can still be imbalanced, but scheduler won’t make it more imbalanced. It’s a required field.

Possible enum values: - "DoNotSchedule" instructs the scheduler not to schedule the pod when constraints are not satisfied. - "ScheduleAnyway" instructs the scheduler to schedule the pod even if constraints are not satisfied.

.spec.volumes

Description

List of volumes that can be mounted by containers belonging to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes

Type

array

.spec.volumes[]

Description

Volume represents a named volume in a pod that may be accessed by any container in the pod.

Type

object

Required
  • name

Property Type Description

awsElasticBlockStore

object

Represents a Persistent Disk resource in AWS.

An AWS EBS disk must exist before mounting to a container. The disk must also be in the same AWS zone as the kubelet. An AWS EBS disk can only be mounted as read/write once. AWS EBS volumes support ownership management and SELinux relabeling.

azureDisk

object

AzureDisk represents an Azure Data Disk mount on the host and bind mount to the pod.

azureFile

object

AzureFile represents an Azure File Service mount on the host and bind mount to the pod.

cephfs

object

Represents a Ceph Filesystem mount that lasts the lifetime of a pod Cephfs volumes do not support ownership management or SELinux relabeling.

cinder

object

Represents a cinder volume resource in Openstack. A Cinder volume must exist before mounting to a container. The volume must also be in the same region as the kubelet. Cinder volumes support ownership management and SELinux relabeling.

configMap

object

Adapts a ConfigMap into a volume.

The contents of the target ConfigMap’s Data field will be presented in a volume as files using the keys in the Data field as the file names, unless the items element is populated with specific mappings of keys to paths. ConfigMap volumes support ownership management and SELinux relabeling.

csi

object

Represents a source location of a volume to mount, managed by an external CSI driver

downwardAPI

object

DownwardAPIVolumeSource represents a volume containing downward API info. Downward API volumes support ownership management and SELinux relabeling.

emptyDir

object

Represents an empty directory for a pod. Empty directory volumes support ownership management and SELinux relabeling.

ephemeral

object

Represents an ephemeral volume that is handled by a normal storage driver.

fc

object

Represents a Fibre Channel volume. Fibre Channel volumes can only be mounted as read/write once. Fibre Channel volumes support ownership management and SELinux relabeling.

flexVolume

object

FlexVolume represents a generic volume resource that is provisioned/attached using an exec based plugin.

flocker

object

Represents a Flocker volume mounted by the Flocker agent. One and only one of datasetName and datasetUUID should be set. Flocker volumes do not support ownership management or SELinux relabeling.

gcePersistentDisk

object

Represents a Persistent Disk resource in Google Compute Engine.

A GCE PD must exist before mounting to a container. The disk must also be in the same GCE project and zone as the kubelet. A GCE PD can only be mounted as read/write once or read-only many times. GCE PDs support ownership management and SELinux relabeling.

gitRepo

object

Represents a volume that is populated with the contents of a git repository. Git repo volumes do not support ownership management. Git repo volumes support SELinux relabeling.

DEPRECATED: GitRepo is deprecated. To provision a container with a git repo, mount an EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir into the Pod’s container.

glusterfs

object

Represents a Glusterfs mount that lasts the lifetime of a pod. Glusterfs volumes do not support ownership management or SELinux relabeling.

hostPath

object

Represents a host path mapped into a pod. Host path volumes do not support ownership management or SELinux relabeling.

iscsi

object

Represents an ISCSI disk. ISCSI volumes can only be mounted as read/write once. ISCSI volumes support ownership management and SELinux relabeling.

name

string

name of the volume. Must be a DNS_LABEL and unique within the pod. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

nfs

object

Represents an NFS mount that lasts the lifetime of a pod. NFS volumes do not support ownership management or SELinux relabeling.

persistentVolumeClaim

object

PersistentVolumeClaimVolumeSource references the user’s PVC in the same namespace. This volume finds the bound PV and mounts that volume for the pod. A PersistentVolumeClaimVolumeSource is, essentially, a wrapper around another type of volume that is owned by someone else (the system).

photonPersistentDisk

object

Represents a Photon Controller persistent disk resource.

portworxVolume

object

PortworxVolumeSource represents a Portworx volume resource.

projected

object

Represents a projected volume source

quobyte

object

Represents a Quobyte mount that lasts the lifetime of a pod. Quobyte volumes do not support ownership management or SELinux relabeling.

rbd

object

Represents a Rados Block Device mount that lasts the lifetime of a pod. RBD volumes support ownership management and SELinux relabeling.

scaleIO

object

ScaleIOVolumeSource represents a persistent ScaleIO volume

secret

object

Adapts a Secret into a volume.

The contents of the target Secret’s Data field will be presented in a volume as files using the keys in the Data field as the file names. Secret volumes support ownership management and SELinux relabeling.

storageos

object

Represents a StorageOS persistent volume resource.

vsphereVolume

object

Represents a vSphere volume resource.

.spec.volumes[].awsElasticBlockStore

Description

Represents a Persistent Disk resource in AWS.

An AWS EBS disk must exist before mounting to a container. The disk must also be in the same AWS zone as the kubelet. An AWS EBS disk can only be mounted as read/write once. AWS EBS volumes support ownership management and SELinux relabeling.

Type

object

Required
  • volumeID

Property Type Description

fsType

string

fsType is the filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

partition

integer

partition is the partition in the volume that you want to mount. If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as "1". Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty).

readOnly

boolean

readOnly value true will force the readOnly setting in VolumeMounts. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

volumeID

string

volumeID is unique ID of the persistent disk resource in AWS (Amazon EBS volume). More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

.spec.volumes[].azureDisk

Description

AzureDisk represents an Azure Data Disk mount on the host and bind mount to the pod.

Type

object

Required
  • diskName

  • diskURI

Property Type Description

cachingMode

string

cachingMode is the Host Caching mode: None, Read Only, Read Write.

Possible enum values: - "None" - "ReadOnly" - "ReadWrite"

diskName

string

diskName is the Name of the data disk in the blob storage

diskURI

string

diskURI is the URI of data disk in the blob storage

fsType

string

fsType is Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.

kind

string

kind expected values are Shared: multiple blob disks per storage account Dedicated: single blob disk per storage account Managed: azure managed data disk (only in managed availability set). defaults to shared

Possible enum values: - "Dedicated" - "Managed" - "Shared"

readOnly

boolean

readOnly Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.

.spec.volumes[].azureFile

Description

AzureFile represents an Azure File Service mount on the host and bind mount to the pod.

Type

object

Required
  • secretName

  • shareName

Property Type Description

readOnly

boolean

readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.

secretName

string

secretName is the name of secret that contains Azure Storage Account Name and Key

shareName

string

shareName is the azure share Name

.spec.volumes[].cephfs

Description

Represents a Ceph Filesystem mount that lasts the lifetime of a pod Cephfs volumes do not support ownership management or SELinux relabeling.

Type

object

Required
  • monitors

Property Type Description

monitors

array (string)

monitors is Required: Monitors is a collection of Ceph monitors More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it

path

string

path is Optional: Used as the mounted root, rather than the full Ceph tree, default is /

readOnly

boolean

readOnly is Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it

secretFile

string

secretFile is Optional: SecretFile is the path to key ring for User, default is /etc/ceph/user.secret More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it

secretRef

object

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

user

string

user is optional: User is the rados user name, default is admin More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it

.spec.volumes[].cephfs.secretRef

Description

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

.spec.volumes[].cinder

Description

Represents a cinder volume resource in Openstack. A Cinder volume must exist before mounting to a container. The volume must also be in the same region as the kubelet. Cinder volumes support ownership management and SELinux relabeling.

Type

object

Required
  • volumeID

Property Type Description

fsType

string

fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://examples.k8s.io/mysql-cinder-pd/README.md

readOnly

boolean

readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info: https://examples.k8s.io/mysql-cinder-pd/README.md

secretRef

object

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

volumeID

string

volumeID used to identify the volume in cinder. More info: https://examples.k8s.io/mysql-cinder-pd/README.md

.spec.volumes[].cinder.secretRef

Description

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

.spec.volumes[].configMap

Description

Adapts a ConfigMap into a volume.

The contents of the target ConfigMap’s Data field will be presented in a volume as files using the keys in the Data field as the file names, unless the items element is populated with specific mappings of keys to paths. ConfigMap volumes support ownership management and SELinux relabeling.

Type

object

Property Type Description

defaultMode

integer

defaultMode is optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

items

array

items if unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.

items[]

object

Maps a string key to a path within a volume.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

optional specify whether the ConfigMap or its keys must be defined

.spec.volumes[].configMap.items

Description

items if unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.

Type

array

.spec.volumes[].configMap.items[]

Description

Maps a string key to a path within a volume.

Type

object

Required
  • key

  • path

Property Type Description

key

string

key is the key to project.

mode

integer

mode is Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

path

string

path is the relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'.

.spec.volumes[].csi

Description

Represents a source location of a volume to mount, managed by an external CSI driver

Type

object

Required
  • driver

Property Type Description

driver

string

driver is the name of the CSI driver that handles this volume. Consult with your admin for the correct name as registered in the cluster.

fsType

string

fsType to mount. Ex. "ext4", "xfs", "ntfs". If not provided, the empty value is passed to the associated CSI driver which will determine the default filesystem to apply.

nodePublishSecretRef

object

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

readOnly

boolean

readOnly specifies a read-only configuration for the volume. Defaults to false (read/write).

volumeAttributes

object (string)

volumeAttributes stores driver-specific properties that are passed to the CSI driver. Consult your driver’s documentation for supported values.

.spec.volumes[].csi.nodePublishSecretRef

Description

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

.spec.volumes[].downwardAPI

Description

DownwardAPIVolumeSource represents a volume containing downward API info. Downward API volumes support ownership management and SELinux relabeling.

Type

object

Property Type Description

defaultMode

integer

Optional: mode bits to use on created files by default. Must be a Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

items

array

Items is a list of downward API volume file

items[]

object

DownwardAPIVolumeFile represents information to create the file containing the pod field

.spec.volumes[].downwardAPI.items

Description

Items is a list of downward API volume file

Type

array

.spec.volumes[].downwardAPI.items[]

Description

DownwardAPIVolumeFile represents information to create the file containing the pod field

Type

object

Required
  • path

Property Type Description

fieldRef

object

ObjectFieldSelector selects an APIVersioned field of an object.

mode

integer

Optional: mode bits used to set permissions on this file, must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

path

string

Required: Path is the relative path name of the file to be created. Must not be absolute or contain the '..' path. Must be utf-8 encoded. The first item of the relative path must not start with '..'

resourceFieldRef

object

ResourceFieldSelector represents container resources (cpu, memory) and their output format

.spec.volumes[].downwardAPI.items[].fieldRef

Description

ObjectFieldSelector selects an APIVersioned field of an object.

Type

object

Required
  • fieldPath

Property Type Description

apiVersion

string

Version of the schema the FieldPath is written in terms of, defaults to "v1".

fieldPath

string

Path of the field to select in the specified API version.

.spec.volumes[].downwardAPI.items[].resourceFieldRef

Description

ResourceFieldSelector represents container resources (cpu, memory) and their output format

Type

object

Required
  • resource

Property Type Description

containerName

string

Container name: required for volumes, optional for env vars

divisor

Quantity

Specifies the output format of the exposed resources, defaults to "1"

resource

string

Required: resource to select

.spec.volumes[].emptyDir

Description

Represents an empty directory for a pod. Empty directory volumes support ownership management and SELinux relabeling.

Type

object

Property Type Description

medium

string

medium represents what type of storage medium should back this directory. The default is "" which means to use the node’s default medium. Must be an empty string (default) or Memory. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir

sizeLimit

Quantity

sizeLimit is the total amount of local storage required for this EmptyDir volume. The size limit is also applicable for memory medium. The maximum usage on memory medium EmptyDir would be the minimum value between the SizeLimit specified here and the sum of memory limits of all containers in a pod. The default is nil which means that the limit is undefined. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir

.spec.volumes[].ephemeral

Description

Represents an ephemeral volume that is handled by a normal storage driver.

Type

object

Property Type Description

volumeClaimTemplate

object

PersistentVolumeClaimTemplate is used to produce PersistentVolumeClaim objects as part of an EphemeralVolumeSource.

.spec.volumes[].ephemeral.volumeClaimTemplate

Description

PersistentVolumeClaimTemplate is used to produce PersistentVolumeClaim objects as part of an EphemeralVolumeSource.

Type

object

Required
  • spec

Property Type Description

metadata

ObjectMeta

May contain labels and annotations that will be copied into the PVC when creating it. No other fields are allowed and will be rejected during validation.

spec

object

PersistentVolumeClaimSpec describes the common attributes of storage devices and allows a Source for provider-specific attributes

.spec.volumes[].ephemeral.volumeClaimTemplate.spec

Description

PersistentVolumeClaimSpec describes the common attributes of storage devices and allows a Source for provider-specific attributes

Type

object

Property Type Description

accessModes

array (string)

accessModes contains the desired access modes the volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1

dataSource

object

TypedLocalObjectReference contains enough information to let you locate the typed referenced object inside the same namespace.

dataSourceRef

object

dataSourceRef specifies the object from which to populate the volume with data, if a non-empty volume is desired. This may be any object from a non-empty API group (non core object) or a PersistentVolumeClaim object. When this field is specified, volume binding will only succeed if the type of the specified object matches some installed volume populator or dynamic provisioner. This field will replace the functionality of the dataSource field and as such if both fields are non-empty, they must have the same value. For backwards compatibility, when namespace isn’t specified in dataSourceRef, both fields (dataSource and dataSourceRef) will be set to the same value automatically if one of them is empty and the other is non-empty. When namespace is specified in dataSourceRef, dataSource isn’t set to the same value and must be empty. There are three important differences between dataSource and dataSourceRef: * While dataSource only allows two specific types of objects, dataSourceRef allows any non-core object, as well as PersistentVolumeClaim objects. * While dataSource ignores disallowed values (dropping them), dataSourceRef preserves all values, and generates an error if a disallowed value is specified. * While dataSource only allows local objects, dataSourceRef allows objects in any namespaces. (Beta) Using this field requires the AnyVolumeDataSource feature gate to be enabled. (Alpha) Using the namespace field of dataSourceRef requires the CrossNamespaceVolumeDataSource feature gate to be enabled.

resources

object

ResourceRequirements describes the compute resource requirements.

selector

LabelSelector

selector is a label query over volumes to consider for binding.

storageClassName

string

storageClassName is the name of the StorageClass required by the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1

volumeMode

string

volumeMode defines what type of volume is required by the claim. Value of Filesystem is implied when not included in claim spec.

Possible enum values: - "Block" means the volume will not be formatted with a filesystem and will remain a raw block device. - "Filesystem" means the volume will be or is formatted with a filesystem.

volumeName

string

volumeName is the binding reference to the PersistentVolume backing this claim.

.spec.volumes[].ephemeral.volumeClaimTemplate.spec.dataSource

Description

TypedLocalObjectReference contains enough information to let you locate the typed referenced object inside the same namespace.

Type

object

Required
  • kind

  • name

Property Type Description

apiGroup

string

APIGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.

kind

string

Kind is the type of resource being referenced

name

string

Name is the name of resource being referenced

.spec.volumes[].ephemeral.volumeClaimTemplate.spec.dataSourceRef

Description

dataSourceRef specifies the object from which to populate the volume with data, if a non-empty volume is desired. This may be any object from a non-empty API group (non core object) or a PersistentVolumeClaim object. When this field is specified, volume binding will only succeed if the type of the specified object matches some installed volume populator or dynamic provisioner. This field will replace the functionality of the dataSource field and as such if both fields are non-empty, they must have the same value. For backwards compatibility, when namespace isn’t specified in dataSourceRef, both fields (dataSource and dataSourceRef) will be set to the same value automatically if one of them is empty and the other is non-empty. When namespace is specified in dataSourceRef, dataSource isn’t set to the same value and must be empty. There are three important differences between dataSource and dataSourceRef: * While dataSource only allows two specific types of objects, dataSourceRef allows any non-core object, as well as PersistentVolumeClaim objects. * While dataSource ignores disallowed values (dropping them), dataSourceRef preserves all values, and generates an error if a disallowed value is specified. * While dataSource only allows local objects, dataSourceRef allows objects in any namespaces. (Beta) Using this field requires the AnyVolumeDataSource feature gate to be enabled. (Alpha) Using the namespace field of dataSourceRef requires the CrossNamespaceVolumeDataSource feature gate to be enabled.

Type

object

Required
  • kind

  • name

Property Type Description

apiGroup

string

APIGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.

kind

string

Kind is the type of resource being referenced

name

string

Name is the name of resource being referenced

namespace

string

Namespace is the namespace of resource being referenced Note that when a namespace is specified, a gateway.networking.k8s.io/ReferenceGrant object is required in the referent namespace to allow that namespace’s owner to accept the reference. See the ReferenceGrant documentation for details. (Alpha) This field requires the CrossNamespaceVolumeDataSource feature gate to be enabled.

.spec.volumes[].ephemeral.volumeClaimTemplate.spec.resources

Description

ResourceRequirements describes the compute resource requirements.

Type

object

Property Type Description

claims

array

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable. It can only be set for containers.

claims[]

object

ResourceClaim references one entry in PodSpec.ResourceClaims.

limits

object (Quantity)

Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

requests

object (Quantity)

Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

.spec.volumes[].ephemeral.volumeClaimTemplate.spec.resources.claims

Description

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable. It can only be set for containers.

Type

array

.spec.volumes[].ephemeral.volumeClaimTemplate.spec.resources.claims[]

Description

ResourceClaim references one entry in PodSpec.ResourceClaims.

Type

object

Required
  • name

Property Type Description

name

string

Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.

.spec.volumes[].fc

Description

Represents a Fibre Channel volume. Fibre Channel volumes can only be mounted as read/write once. Fibre Channel volumes support ownership management and SELinux relabeling.

Type

object

Property Type Description

fsType

string

fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.

lun

integer

lun is Optional: FC target lun number

readOnly

boolean

readOnly is Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.

targetWWNs

array (string)

targetWWNs is Optional: FC target worldwide names (WWNs)

wwids

array (string)

wwids Optional: FC volume world wide identifiers (wwids) Either wwids or combination of targetWWNs and lun must be set, but not both simultaneously.

.spec.volumes[].flexVolume

Description

FlexVolume represents a generic volume resource that is provisioned/attached using an exec based plugin.

Type

object

Required
  • driver

Property Type Description

driver

string

driver is the name of the driver to use for this volume.

fsType

string

fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". The default filesystem depends on FlexVolume script.

options

object (string)

options is Optional: this field holds extra command options if any.

readOnly

boolean

readOnly is Optional: defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.

secretRef

object

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

.spec.volumes[].flexVolume.secretRef

Description

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

.spec.volumes[].flocker

Description

Represents a Flocker volume mounted by the Flocker agent. One and only one of datasetName and datasetUUID should be set. Flocker volumes do not support ownership management or SELinux relabeling.

Type

object

Property Type Description

datasetName

string

datasetName is Name of the dataset stored as metadata → name on the dataset for Flocker should be considered as deprecated

datasetUUID

string

datasetUUID is the UUID of the dataset. This is unique identifier of a Flocker dataset

.spec.volumes[].gcePersistentDisk

Description

Represents a Persistent Disk resource in Google Compute Engine.

A GCE PD must exist before mounting to a container. The disk must also be in the same GCE project and zone as the kubelet. A GCE PD can only be mounted as read/write once or read-only many times. GCE PDs support ownership management and SELinux relabeling.

Type

object

Required
  • pdName

Property Type Description

fsType

string

fsType is filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk

partition

integer

partition is the partition in the volume that you want to mount. If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as "1". Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk

pdName

string

pdName is unique name of the PD resource in GCE. Used to identify the disk in GCE. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk

readOnly

boolean

readOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk

.spec.volumes[].gitRepo

Description

Represents a volume that is populated with the contents of a git repository. Git repo volumes do not support ownership management. Git repo volumes support SELinux relabeling.

DEPRECATED: GitRepo is deprecated. To provision a container with a git repo, mount an EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir into the Pod’s container.

Type

object

Required
  • repository

Property Type Description

directory

string

directory is the target directory name. Must not contain or start with '..'. If '.' is supplied, the volume directory will be the git repository. Otherwise, if specified, the volume will contain the git repository in the subdirectory with the given name.

repository

string

repository is the URL

revision

string

revision is the commit hash for the specified revision.

.spec.volumes[].glusterfs

Description

Represents a Glusterfs mount that lasts the lifetime of a pod. Glusterfs volumes do not support ownership management or SELinux relabeling.

Type

object

Required
  • endpoints

  • path

Property Type Description

endpoints

string

endpoints is the endpoint name that details Glusterfs topology. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod

path

string

path is the Glusterfs volume path. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod

readOnly

boolean

readOnly here will force the Glusterfs volume to be mounted with read-only permissions. Defaults to false. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod

.spec.volumes[].hostPath

Description

Represents a host path mapped into a pod. Host path volumes do not support ownership management or SELinux relabeling.

Type

object

Required
  • path

Property Type Description

path

string

path of the directory on the host. If the path is a symlink, it will follow the link to the real path. More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath

type

string

type for HostPath Volume Defaults to "" More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath

Possible enum values: - "" For backwards compatible, leave it empty if unset - "BlockDevice" A block device must exist at the given path - "CharDevice" A character device must exist at the given path - "Directory" A directory must exist at the given path - "DirectoryOrCreate" If nothing exists at the given path, an empty directory will be created there as needed with file mode 0755, having the same group and ownership with Kubelet. - "File" A file must exist at the given path - "FileOrCreate" If nothing exists at the given path, an empty file will be created there as needed with file mode 0644, having the same group and ownership with Kubelet. - "Socket" A UNIX socket must exist at the given path

.spec.volumes[].iscsi

Description

Represents an ISCSI disk. ISCSI volumes can only be mounted as read/write once. ISCSI volumes support ownership management and SELinux relabeling.

Type

object

Required
  • targetPortal

  • iqn

  • lun

Property Type Description

chapAuthDiscovery

boolean

chapAuthDiscovery defines whether support iSCSI Discovery CHAP authentication

chapAuthSession

boolean

chapAuthSession defines whether support iSCSI Session CHAP authentication

fsType

string

fsType is the filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#iscsi

initiatorName

string

initiatorName is the custom iSCSI Initiator Name. If initiatorName is specified with iscsiInterface simultaneously, new iSCSI interface <target portal>:<volume name> will be created for the connection.

iqn

string

iqn is the target iSCSI Qualified Name.

iscsiInterface

string

iscsiInterface is the interface Name that uses an iSCSI transport. Defaults to 'default' (tcp).

lun

integer

lun represents iSCSI Target Lun number.

portals

array (string)

portals is the iSCSI Target Portal List. The portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260).

readOnly

boolean

readOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false.

secretRef

object

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

targetPortal

string

targetPortal is iSCSI Target Portal. The Portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260).

.spec.volumes[].iscsi.secretRef

Description

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

.spec.volumes[].nfs

Description

Represents an NFS mount that lasts the lifetime of a pod. NFS volumes do not support ownership management or SELinux relabeling.

Type

object

Required
  • server

  • path

Property Type Description

path

string

path that is exported by the NFS server. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs

readOnly

boolean

readOnly here will force the NFS export to be mounted with read-only permissions. Defaults to false. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs

server

string

server is the hostname or IP address of the NFS server. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs

.spec.volumes[].persistentVolumeClaim

Description

PersistentVolumeClaimVolumeSource references the user’s PVC in the same namespace. This volume finds the bound PV and mounts that volume for the pod. A PersistentVolumeClaimVolumeSource is, essentially, a wrapper around another type of volume that is owned by someone else (the system).

Type

object

Required
  • claimName

Property Type Description

claimName

string

claimName is the name of a PersistentVolumeClaim in the same namespace as the pod using this volume. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims

readOnly

boolean

readOnly Will force the ReadOnly setting in VolumeMounts. Default false.

.spec.volumes[].photonPersistentDisk

Description

Represents a Photon Controller persistent disk resource.

Type

object

Required
  • pdID

Property Type Description

fsType

string

fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.

pdID

string

pdID is the ID that identifies Photon Controller persistent disk

.spec.volumes[].portworxVolume

Description

PortworxVolumeSource represents a Portworx volume resource.

Type

object

Required
  • volumeID

Property Type Description

fsType

string

fSType represents the filesystem type to mount Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs". Implicitly inferred to be "ext4" if unspecified.

readOnly

boolean

readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.

volumeID

string

volumeID uniquely identifies a Portworx volume

.spec.volumes[].projected

Description

Represents a projected volume source

Type

object

Property Type Description

defaultMode

integer

defaultMode are the mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

sources

array

sources is the list of volume projections

sources[]

object

Projection that may be projected along with other supported volume types

.spec.volumes[].projected.sources

Description

sources is the list of volume projections

Type

array

.spec.volumes[].projected.sources[]

Description

Projection that may be projected along with other supported volume types

Type

object

Property Type Description

configMap

object

Adapts a ConfigMap into a projected volume.

The contents of the target ConfigMap’s Data field will be presented in a projected volume as files using the keys in the Data field as the file names, unless the items element is populated with specific mappings of keys to paths. Note that this is identical to a configmap volume source without the default mode.

downwardAPI

object

Represents downward API info for projecting into a projected volume. Note that this is identical to a downwardAPI volume source without the default mode.

secret

object

Adapts a secret into a projected volume.

The contents of the target Secret’s Data field will be presented in a projected volume as files using the keys in the Data field as the file names. Note that this is identical to a secret volume source without the default mode.

serviceAccountToken

object

ServiceAccountTokenProjection represents a projected service account token volume. This projection can be used to insert a service account token into the pods runtime filesystem for use against APIs (Kubernetes API Server or otherwise).

.spec.volumes[].projected.sources[].configMap

Description

Adapts a ConfigMap into a projected volume.

The contents of the target ConfigMap’s Data field will be presented in a projected volume as files using the keys in the Data field as the file names, unless the items element is populated with specific mappings of keys to paths. Note that this is identical to a configmap volume source without the default mode.

Type

object

Property Type Description

items

array

items if unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.

items[]

object

Maps a string key to a path within a volume.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

optional specify whether the ConfigMap or its keys must be defined

.spec.volumes[].projected.sources[].configMap.items

Description

items if unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.

Type

array

.spec.volumes[].projected.sources[].configMap.items[]

Description

Maps a string key to a path within a volume.

Type

object

Required
  • key

  • path

Property Type Description

key

string

key is the key to project.

mode

integer

mode is Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

path

string

path is the relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'.

.spec.volumes[].projected.sources[].downwardAPI

Description

Represents downward API info for projecting into a projected volume. Note that this is identical to a downwardAPI volume source without the default mode.

Type

object

Property Type Description

items

array

Items is a list of DownwardAPIVolume file

items[]

object

DownwardAPIVolumeFile represents information to create the file containing the pod field

.spec.volumes[].projected.sources[].downwardAPI.items

Description

Items is a list of DownwardAPIVolume file

Type

array

.spec.volumes[].projected.sources[].downwardAPI.items[]

Description

DownwardAPIVolumeFile represents information to create the file containing the pod field

Type

object

Required
  • path

Property Type Description

fieldRef

object

ObjectFieldSelector selects an APIVersioned field of an object.

mode

integer

Optional: mode bits used to set permissions on this file, must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

path

string

Required: Path is the relative path name of the file to be created. Must not be absolute or contain the '..' path. Must be utf-8 encoded. The first item of the relative path must not start with '..'

resourceFieldRef

object

ResourceFieldSelector represents container resources (cpu, memory) and their output format

.spec.volumes[].projected.sources[].downwardAPI.items[].fieldRef

Description

ObjectFieldSelector selects an APIVersioned field of an object.

Type

object

Required
  • fieldPath

Property Type Description

apiVersion

string

Version of the schema the FieldPath is written in terms of, defaults to "v1".

fieldPath

string

Path of the field to select in the specified API version.

.spec.volumes[].projected.sources[].downwardAPI.items[].resourceFieldRef

Description

ResourceFieldSelector represents container resources (cpu, memory) and their output format

Type

object

Required
  • resource

Property Type Description

containerName

string

Container name: required for volumes, optional for env vars

divisor

Quantity

Specifies the output format of the exposed resources, defaults to "1"

resource

string

Required: resource to select

.spec.volumes[].projected.sources[].secret

Description

Adapts a secret into a projected volume.

The contents of the target Secret’s Data field will be presented in a projected volume as files using the keys in the Data field as the file names. Note that this is identical to a secret volume source without the default mode.

Type

object

Property Type Description

items

array

items if unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.

items[]

object

Maps a string key to a path within a volume.

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

optional

boolean

optional field specify whether the Secret or its key must be defined

.spec.volumes[].projected.sources[].secret.items

Description

items if unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.

Type

array

.spec.volumes[].projected.sources[].secret.items[]

Description

Maps a string key to a path within a volume.

Type

object

Required
  • key

  • path

Property Type Description

key

string

key is the key to project.

mode

integer

mode is Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

path

string

path is the relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'.

.spec.volumes[].projected.sources[].serviceAccountToken

Description

ServiceAccountTokenProjection represents a projected service account token volume. This projection can be used to insert a service account token into the pods runtime filesystem for use against APIs (Kubernetes API Server or otherwise).

Type

object

Required
  • path

Property Type Description

audience

string

audience is the intended audience of the token. A recipient of a token must identify itself with an identifier specified in the audience of the token, and otherwise should reject the token. The audience defaults to the identifier of the apiserver.

expirationSeconds

integer

expirationSeconds is the requested duration of validity of the service account token. As the token approaches expiration, the kubelet volume plugin will proactively rotate the service account token. The kubelet will start trying to rotate the token if the token is older than 80 percent of its time to live or if the token is older than 24 hours.Defaults to 1 hour and must be at least 10 minutes.

path

string

path is the path relative to the mount point of the file to project the token into.

.spec.volumes[].quobyte

Description

Represents a Quobyte mount that lasts the lifetime of a pod. Quobyte volumes do not support ownership management or SELinux relabeling.

Type

object

Required
  • registry

  • volume

Property Type Description

group

string

group to map volume access to Default is no group

readOnly

boolean

readOnly here will force the Quobyte volume to be mounted with read-only permissions. Defaults to false.

registry

string

registry represents a single or multiple Quobyte Registry services specified as a string as host:port pair (multiple entries are separated with commas) which acts as the central registry for volumes

tenant

string

tenant owning the given Quobyte volume in the Backend Used with dynamically provisioned Quobyte volumes, value is set by the plugin

user

string

user to map volume access to Defaults to serivceaccount user

volume

string

volume is a string that references an already created Quobyte volume by name.

.spec.volumes[].rbd

Description

Represents a Rados Block Device mount that lasts the lifetime of a pod. RBD volumes support ownership management and SELinux relabeling.

Type

object

Required
  • monitors

  • image

Property Type Description

fsType

string

fsType is the filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#rbd

image

string

image is the rados image name. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it

keyring

string

keyring is the path to key ring for RBDUser. Default is /etc/ceph/keyring. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it

monitors

array (string)

monitors is a collection of Ceph monitors. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it

pool

string

pool is the rados pool name. Default is rbd. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it

readOnly

boolean

readOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it

secretRef

object

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

user

string

user is the rados user name. Default is admin. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it

.spec.volumes[].rbd.secretRef

Description

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

.spec.volumes[].scaleIO

Description

ScaleIOVolumeSource represents a persistent ScaleIO volume

Type

object

Required
  • gateway

  • system

  • secretRef

Property Type Description

fsType

string

fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Default is "xfs".

gateway

string

gateway is the host address of the ScaleIO API Gateway.

protectionDomain

string

protectionDomain is the name of the ScaleIO Protection Domain for the configured storage.

readOnly

boolean

readOnly Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.

secretRef

object

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

sslEnabled

boolean

sslEnabled Flag enable/disable SSL communication with Gateway, default false

storageMode

string

storageMode indicates whether the storage for a volume should be ThickProvisioned or ThinProvisioned. Default is ThinProvisioned.

storagePool

string

storagePool is the ScaleIO Storage Pool associated with the protection domain.

system

string

system is the name of the storage system as configured in ScaleIO.

volumeName

string

volumeName is the name of a volume already created in the ScaleIO system that is associated with this volume source.

.spec.volumes[].scaleIO.secretRef

Description

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

.spec.volumes[].secret

Description

Adapts a Secret into a volume.

The contents of the target Secret’s Data field will be presented in a volume as files using the keys in the Data field as the file names. Secret volumes support ownership management and SELinux relabeling.

Type

object

Property Type Description

defaultMode

integer

defaultMode is Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

items

array

items If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.

items[]

object

Maps a string key to a path within a volume.

optional

boolean

optional field specify whether the Secret or its keys must be defined

secretName

string

secretName is the name of the secret in the pod’s namespace to use. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret

.spec.volumes[].secret.items

Description

items If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.

Type

array

.spec.volumes[].secret.items[]

Description

Maps a string key to a path within a volume.

Type

object

Required
  • key

  • path

Property Type Description

key

string

key is the key to project.

mode

integer

mode is Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

path

string

path is the relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'.

.spec.volumes[].storageos

Description

Represents a StorageOS persistent volume resource.

Type

object

Property Type Description

fsType

string

fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.

readOnly

boolean

readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.

secretRef

object

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

volumeName

string

volumeName is the human-readable name of the StorageOS volume. Volume names are only unique within a namespace.

volumeNamespace

string

volumeNamespace specifies the scope of the volume within StorageOS. If no namespace is specified then the Pod’s namespace will be used. This allows the Kubernetes name scoping to be mirrored within StorageOS for tighter integration. Set VolumeName to any name to override the default behaviour. Set to "default" if you are not using namespaces within StorageOS. Namespaces that do not pre-exist within StorageOS will be created.

.spec.volumes[].storageos.secretRef

Description

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

Type

object

Property Type Description

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

.spec.volumes[].vsphereVolume

Description

Represents a vSphere volume resource.

Type

object

Required
  • volumePath

Property Type Description

fsType

string

fsType is filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.

storagePolicyID

string

storagePolicyID is the storage Policy Based Management (SPBM) profile ID associated with the StoragePolicyName.

storagePolicyName

string

storagePolicyName is the storage Policy Based Management (SPBM) profile name.

volumePath

string

volumePath is the path that identifies vSphere volume vmdk

.status

Description

PodStatus represents information about the status of a pod. Status may trail the actual state of a system, especially if the node that hosts the pod cannot contact the control plane.

Type

object

Property Type Description

conditions

array

Current service state of pod. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-conditions

conditions[]

object

PodCondition contains details for the current condition of this pod.

containerStatuses

array

The list has one entry per container in the manifest. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-and-container-status

containerStatuses[]

object

ContainerStatus contains details for the current status of this container.

ephemeralContainerStatuses

array

Status for any ephemeral containers that have run in this pod.

ephemeralContainerStatuses[]

object

ContainerStatus contains details for the current status of this container.

hostIP

string

hostIP holds the IP address of the host to which the pod is assigned. Empty if the pod has not started yet. A pod can be assigned to a node that has a problem in kubelet which in turns mean that HostIP will not be updated even if there is a node is assigned to pod

hostIPs

array

hostIPs holds the IP addresses allocated to the host. If this field is specified, the first entry must match the hostIP field. This list is empty if the pod has not started yet. A pod can be assigned to a node that has a problem in kubelet which in turns means that HostIPs will not be updated even if there is a node is assigned to this pod.

hostIPs[]

object

HostIP represents a single IP address allocated to the host.

initContainerStatuses

array

The list has one entry per init container in the manifest. The most recent successful init container will have ready = true, the most recently started container will have startTime set. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-and-container-status

initContainerStatuses[]

object

ContainerStatus contains details for the current status of this container.

message

string

A human readable message indicating details about why the pod is in this condition.

nominatedNodeName

string

nominatedNodeName is set only when this pod preempts other pods on the node, but it cannot be scheduled right away as preemption victims receive their graceful termination periods. This field does not guarantee that the pod will be scheduled on this node. Scheduler may decide to place the pod elsewhere if other nodes become available sooner. Scheduler may also decide to give the resources on this node to a higher priority pod that is created after preemption. As a result, this field may be different than PodSpec.nodeName when the pod is scheduled.

phase

string

The phase of a Pod is a simple, high-level summary of where the Pod is in its lifecycle. The conditions array, the reason and message fields, and the individual container status arrays contain more detail about the pod’s status. There are five possible phase values:

Pending: The pod has been accepted by the Kubernetes system, but one or more of the container images has not been created. This includes time before being scheduled as well as time spent downloading images over the network, which could take a while. Running: The pod has been bound to a node, and all of the containers have been created. At least one container is still running, or is in the process of starting or restarting. Succeeded: All containers in the pod have terminated in success, and will not be restarted. Failed: All containers in the pod have terminated, and at least one container has terminated in failure. The container either exited with non-zero status or was terminated by the system. Unknown: For some reason the state of the pod could not be obtained, typically due to an error in communicating with the host of the pod.

More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-phase

Possible enum values: - "Failed" means that all containers in the pod have terminated, and at least one container has terminated in a failure (exited with a non-zero exit code or was stopped by the system). - "Pending" means the pod has been accepted by the system, but one or more of the containers has not been started. This includes time before being bound to a node, as well as time spent pulling images onto the host. - "Running" means the pod has been bound to a node and all of the containers have been started. At least one container is still running or is in the process of being restarted. - "Succeeded" means that all containers in the pod have voluntarily terminated with a container exit code of 0, and the system is not going to restart any of these containers. - "Unknown" means that for some reason the state of the pod could not be obtained, typically due to an error in communicating with the host of the pod. Deprecated: It isn’t being set since 2015 (74da3b14b0c0f658b3bb8d2def5094686d0e9095)

podIP

string

podIP address allocated to the pod. Routable at least within the cluster. Empty if not yet allocated.

podIPs

array

podIPs holds the IP addresses allocated to the pod. If this field is specified, the 0th entry must match the podIP field. Pods may be allocated at most 1 value for each of IPv4 and IPv6. This list is empty if no IPs have been allocated yet.

podIPs[]

object

PodIP represents a single IP address allocated to the pod.

qosClass

string

The Quality of Service (QOS) classification assigned to the pod based on resource requirements See PodQOSClass type for available QOS classes More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-qos/#quality-of-service-classes

Possible enum values: - "BestEffort" is the BestEffort qos class. - "Burstable" is the Burstable qos class. - "Guaranteed" is the Guaranteed qos class.

reason

string

A brief CamelCase message indicating details about why the pod is in this state. e.g. 'Evicted'

resize

string

Status of resources resize desired for pod’s containers. It is empty if no resources resize is pending. Any changes to container resources will automatically set this to "Proposed"

resourceClaimStatuses

array

Status of resource claims.

resourceClaimStatuses[]

object

PodResourceClaimStatus is stored in the PodStatus for each PodResourceClaim which references a ResourceClaimTemplate. It stores the generated name for the corresponding ResourceClaim.

startTime

Time

RFC 3339 date and time at which the object was acknowledged by the Kubelet. This is before the Kubelet pulled the container image(s) for the pod.

.status.conditions

Description
Type

array

.status.conditions[]

Description

PodCondition contains details for the current condition of this pod.

Type

object

Required
  • type

  • status

Property Type Description

lastProbeTime

Time

Last time we probed the condition.

lastTransitionTime

Time

Last time the condition transitioned from one status to another.

message

string

Human-readable message indicating details about last transition.

reason

string

Unique, one-word, CamelCase reason for the condition’s last transition.

status

string

Status is the status of the condition. Can be True, False, Unknown. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-conditions

type

string

Type is the type of the condition. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-conditions

.status.containerStatuses

Description

The list has one entry per container in the manifest. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-and-container-status

Type

array

.status.containerStatuses[]

Description

ContainerStatus contains details for the current status of this container.

Type

object

Required
  • name

  • ready

  • restartCount

  • image

  • imageID

Property Type Description

allocatedResources

object (Quantity)

AllocatedResources represents the compute resources allocated for this container by the node. Kubelet sets this value to Container.Resources.Requests upon successful pod admission and after successfully admitting desired pod resize.

containerID

string

ContainerID is the ID of the container in the format '<type>://<container_id>'. Where type is a container runtime identifier, returned from Version call of CRI API (for example "containerd").

image

string

Image is the name of container image that the container is running. The container image may not match the image used in the PodSpec, as it may have been resolved by the runtime. More info: https://kubernetes.io/docs/concepts/containers/images.

imageID

string

ImageID is the image ID of the container’s image. The image ID may not match the image ID of the image used in the PodSpec, as it may have been resolved by the runtime.

lastState

object

ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.

name

string

Name is a DNS_LABEL representing the unique name of the container. Each container in a pod must have a unique name across all container types. Cannot be updated.

ready

boolean

Ready specifies whether the container is currently passing its readiness check. The value will change as readiness probes keep executing. If no readiness probes are specified, this field defaults to true once the container is fully started (see Started field).

The value is typically used to determine whether a container is ready to accept traffic.

resources

object

ResourceRequirements describes the compute resource requirements.

restartCount

integer

RestartCount holds the number of times the container has been restarted. Kubelet makes an effort to always increment the value, but there are cases when the state may be lost due to node restarts and then the value may be reset to 0. The value is never negative.

started

boolean

Started indicates whether the container has finished its postStart lifecycle hook and passed its startup probe. Initialized as false, becomes true after startupProbe is considered successful. Resets to false when the container is restarted, or if kubelet loses state temporarily. In both cases, startup probes will run again. Is always true when no startupProbe is defined and container is running and has passed the postStart lifecycle hook. The null value must be treated the same as false.

state

object

ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.

.status.containerStatuses[].lastState

Description

ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.

Type

object

Property Type Description

running

object

ContainerStateRunning is a running state of a container.

terminated

object

ContainerStateTerminated is a terminated state of a container.

waiting

object

ContainerStateWaiting is a waiting state of a container.

.status.containerStatuses[].lastState.running

Description

ContainerStateRunning is a running state of a container.

Type

object

Property Type Description

startedAt

Time

Time at which the container was last (re-)started

.status.containerStatuses[].lastState.terminated

Description

ContainerStateTerminated is a terminated state of a container.

Type

object

Required
  • exitCode

Property Type Description

containerID

string

Container’s ID in the format '<type>://<container_id>'

exitCode

integer

Exit status from the last termination of the container

finishedAt

Time

Time at which the container last terminated

message

string

Message regarding the last termination of the container

reason

string

(brief) reason from the last termination of the container

signal

integer

Signal from the last termination of the container

startedAt

Time

Time at which previous execution of the container started

.status.containerStatuses[].lastState.waiting

Description

ContainerStateWaiting is a waiting state of a container.

Type

object

Property Type Description

message

string

Message regarding why the container is not yet running.

reason

string

(brief) reason the container is not yet running.

.status.containerStatuses[].resources

Description

ResourceRequirements describes the compute resource requirements.

Type

object

Property Type Description

claims

array

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable. It can only be set for containers.

claims[]

object

ResourceClaim references one entry in PodSpec.ResourceClaims.

limits

object (Quantity)

Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

requests

object (Quantity)

Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

.status.containerStatuses[].resources.claims

Description

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable. It can only be set for containers.

Type

array

.status.containerStatuses[].resources.claims[]

Description

ResourceClaim references one entry in PodSpec.ResourceClaims.

Type

object

Required
  • name

Property Type Description

name

string

Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.

.status.containerStatuses[].state

Description

ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.

Type

object

Property Type Description

running

object

ContainerStateRunning is a running state of a container.

terminated

object

ContainerStateTerminated is a terminated state of a container.

waiting

object

ContainerStateWaiting is a waiting state of a container.

.status.containerStatuses[].state.running

Description

ContainerStateRunning is a running state of a container.

Type

object

Property Type Description

startedAt

Time

Time at which the container was last (re-)started

.status.containerStatuses[].state.terminated

Description

ContainerStateTerminated is a terminated state of a container.

Type

object

Required
  • exitCode

Property Type Description

containerID

string

Container’s ID in the format '<type>://<container_id>'

exitCode

integer

Exit status from the last termination of the container

finishedAt

Time

Time at which the container last terminated

message

string

Message regarding the last termination of the container

reason

string

(brief) reason from the last termination of the container

signal

integer

Signal from the last termination of the container

startedAt

Time

Time at which previous execution of the container started

.status.containerStatuses[].state.waiting

Description

ContainerStateWaiting is a waiting state of a container.

Type

object

Property Type Description

message

string

Message regarding why the container is not yet running.

reason

string

(brief) reason the container is not yet running.

.status.ephemeralContainerStatuses

Description

Status for any ephemeral containers that have run in this pod.

Type

array

.status.ephemeralContainerStatuses[]

Description

ContainerStatus contains details for the current status of this container.

Type

object

Required
  • name

  • ready

  • restartCount

  • image

  • imageID

Property Type Description

allocatedResources

object (Quantity)

AllocatedResources represents the compute resources allocated for this container by the node. Kubelet sets this value to Container.Resources.Requests upon successful pod admission and after successfully admitting desired pod resize.

containerID

string

ContainerID is the ID of the container in the format '<type>://<container_id>'. Where type is a container runtime identifier, returned from Version call of CRI API (for example "containerd").

image

string

Image is the name of container image that the container is running. The container image may not match the image used in the PodSpec, as it may have been resolved by the runtime. More info: https://kubernetes.io/docs/concepts/containers/images.

imageID

string

ImageID is the image ID of the container’s image. The image ID may not match the image ID of the image used in the PodSpec, as it may have been resolved by the runtime.

lastState

object

ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.

name

string

Name is a DNS_LABEL representing the unique name of the container. Each container in a pod must have a unique name across all container types. Cannot be updated.

ready

boolean

Ready specifies whether the container is currently passing its readiness check. The value will change as readiness probes keep executing. If no readiness probes are specified, this field defaults to true once the container is fully started (see Started field).

The value is typically used to determine whether a container is ready to accept traffic.

resources

object

ResourceRequirements describes the compute resource requirements.

restartCount

integer

RestartCount holds the number of times the container has been restarted. Kubelet makes an effort to always increment the value, but there are cases when the state may be lost due to node restarts and then the value may be reset to 0. The value is never negative.

started

boolean

Started indicates whether the container has finished its postStart lifecycle hook and passed its startup probe. Initialized as false, becomes true after startupProbe is considered successful. Resets to false when the container is restarted, or if kubelet loses state temporarily. In both cases, startup probes will run again. Is always true when no startupProbe is defined and container is running and has passed the postStart lifecycle hook. The null value must be treated the same as false.

state

object

ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.

.status.ephemeralContainerStatuses[].lastState

Description

ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.

Type

object

Property Type Description

running

object

ContainerStateRunning is a running state of a container.

terminated

object

ContainerStateTerminated is a terminated state of a container.

waiting

object

ContainerStateWaiting is a waiting state of a container.

.status.ephemeralContainerStatuses[].lastState.running

Description

ContainerStateRunning is a running state of a container.

Type

object

Property Type Description

startedAt

Time

Time at which the container was last (re-)started

.status.ephemeralContainerStatuses[].lastState.terminated

Description

ContainerStateTerminated is a terminated state of a container.

Type

object

Required
  • exitCode

Property Type Description

containerID

string

Container’s ID in the format '<type>://<container_id>'

exitCode

integer

Exit status from the last termination of the container

finishedAt

Time

Time at which the container last terminated

message

string

Message regarding the last termination of the container

reason

string

(brief) reason from the last termination of the container

signal

integer

Signal from the last termination of the container

startedAt

Time

Time at which previous execution of the container started

.status.ephemeralContainerStatuses[].lastState.waiting

Description

ContainerStateWaiting is a waiting state of a container.

Type

object

Property Type Description

message

string

Message regarding why the container is not yet running.

reason

string

(brief) reason the container is not yet running.

.status.ephemeralContainerStatuses[].resources

Description

ResourceRequirements describes the compute resource requirements.

Type

object

Property Type Description

claims

array

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable. It can only be set for containers.

claims[]

object

ResourceClaim references one entry in PodSpec.ResourceClaims.

limits

object (Quantity)

Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

requests

object (Quantity)

Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

.status.ephemeralContainerStatuses[].resources.claims

Description

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable. It can only be set for containers.

Type

array

.status.ephemeralContainerStatuses[].resources.claims[]

Description

ResourceClaim references one entry in PodSpec.ResourceClaims.

Type

object

Required
  • name

Property Type Description

name

string

Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.

.status.ephemeralContainerStatuses[].state

Description

ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.

Type

object

Property Type Description

running

object

ContainerStateRunning is a running state of a container.

terminated

object

ContainerStateTerminated is a terminated state of a container.

waiting

object

ContainerStateWaiting is a waiting state of a container.

.status.ephemeralContainerStatuses[].state.running

Description

ContainerStateRunning is a running state of a container.

Type

object

Property Type Description

startedAt

Time

Time at which the container was last (re-)started

.status.ephemeralContainerStatuses[].state.terminated

Description

ContainerStateTerminated is a terminated state of a container.

Type

object

Required
  • exitCode

Property Type Description

containerID

string

Container’s ID in the format '<type>://<container_id>'

exitCode

integer

Exit status from the last termination of the container

finishedAt

Time

Time at which the container last terminated

message

string

Message regarding the last termination of the container

reason

string

(brief) reason from the last termination of the container

signal

integer

Signal from the last termination of the container

startedAt

Time

Time at which previous execution of the container started

.status.ephemeralContainerStatuses[].state.waiting

Description

ContainerStateWaiting is a waiting state of a container.

Type

object

Property Type Description

message

string

Message regarding why the container is not yet running.

reason

string

(brief) reason the container is not yet running.

.status.hostIPs

Description

hostIPs holds the IP addresses allocated to the host. If this field is specified, the first entry must match the hostIP field. This list is empty if the pod has not started yet. A pod can be assigned to a node that has a problem in kubelet which in turns means that HostIPs will not be updated even if there is a node is assigned to this pod.

Type

array

.status.hostIPs[]

Description

HostIP represents a single IP address allocated to the host.

Type

object

Property Type Description

ip

string

IP is the IP address assigned to the host

.status.initContainerStatuses

Description

The list has one entry per init container in the manifest. The most recent successful init container will have ready = true, the most recently started container will have startTime set. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-and-container-status

Type

array

.status.initContainerStatuses[]

Description

ContainerStatus contains details for the current status of this container.

Type

object

Required
  • name

  • ready

  • restartCount

  • image

  • imageID

Property Type Description

allocatedResources

object (Quantity)

AllocatedResources represents the compute resources allocated for this container by the node. Kubelet sets this value to Container.Resources.Requests upon successful pod admission and after successfully admitting desired pod resize.

containerID

string

ContainerID is the ID of the container in the format '<type>://<container_id>'. Where type is a container runtime identifier, returned from Version call of CRI API (for example "containerd").

image

string

Image is the name of container image that the container is running. The container image may not match the image used in the PodSpec, as it may have been resolved by the runtime. More info: https://kubernetes.io/docs/concepts/containers/images.

imageID

string

ImageID is the image ID of the container’s image. The image ID may not match the image ID of the image used in the PodSpec, as it may have been resolved by the runtime.

lastState

object

ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.

name

string

Name is a DNS_LABEL representing the unique name of the container. Each container in a pod must have a unique name across all container types. Cannot be updated.

ready

boolean

Ready specifies whether the container is currently passing its readiness check. The value will change as readiness probes keep executing. If no readiness probes are specified, this field defaults to true once the container is fully started (see Started field).

The value is typically used to determine whether a container is ready to accept traffic.

resources

object

ResourceRequirements describes the compute resource requirements.

restartCount

integer

RestartCount holds the number of times the container has been restarted. Kubelet makes an effort to always increment the value, but there are cases when the state may be lost due to node restarts and then the value may be reset to 0. The value is never negative.

started

boolean

Started indicates whether the container has finished its postStart lifecycle hook and passed its startup probe. Initialized as false, becomes true after startupProbe is considered successful. Resets to false when the container is restarted, or if kubelet loses state temporarily. In both cases, startup probes will run again. Is always true when no startupProbe is defined and container is running and has passed the postStart lifecycle hook. The null value must be treated the same as false.

state

object

ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.

.status.initContainerStatuses[].lastState

Description

ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.

Type

object

Property Type Description

running

object

ContainerStateRunning is a running state of a container.

terminated

object

ContainerStateTerminated is a terminated state of a container.

waiting

object

ContainerStateWaiting is a waiting state of a container.

.status.initContainerStatuses[].lastState.running

Description

ContainerStateRunning is a running state of a container.

Type

object

Property Type Description

startedAt

Time

Time at which the container was last (re-)started

.status.initContainerStatuses[].lastState.terminated

Description

ContainerStateTerminated is a terminated state of a container.

Type

object

Required
  • exitCode

Property Type Description

containerID

string

Container’s ID in the format '<type>://<container_id>'

exitCode

integer

Exit status from the last termination of the container

finishedAt

Time

Time at which the container last terminated

message

string

Message regarding the last termination of the container

reason

string

(brief) reason from the last termination of the container

signal

integer

Signal from the last termination of the container

startedAt

Time

Time at which previous execution of the container started

.status.initContainerStatuses[].lastState.waiting

Description

ContainerStateWaiting is a waiting state of a container.

Type

object

Property Type Description

message

string

Message regarding why the container is not yet running.

reason

string

(brief) reason the container is not yet running.

.status.initContainerStatuses[].resources

Description

ResourceRequirements describes the compute resource requirements.

Type

object

Property Type Description

claims

array

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable. It can only be set for containers.

claims[]

object

ResourceClaim references one entry in PodSpec.ResourceClaims.

limits

object (Quantity)

Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

requests

object (Quantity)

Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

.status.initContainerStatuses[].resources.claims

Description

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

This field is immutable. It can only be set for containers.

Type

array

.status.initContainerStatuses[].resources.claims[]

Description

ResourceClaim references one entry in PodSpec.ResourceClaims.

Type

object

Required
  • name

Property Type Description

name

string

Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.

.status.initContainerStatuses[].state

Description

ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.

Type

object

Property Type Description

running

object

ContainerStateRunning is a running state of a container.

terminated

object

ContainerStateTerminated is a terminated state of a container.

waiting

object

ContainerStateWaiting is a waiting state of a container.

.status.initContainerStatuses[].state.running

Description

ContainerStateRunning is a running state of a container.

Type

object

Property Type Description

startedAt

Time

Time at which the container was last (re-)started

.status.initContainerStatuses[].state.terminated

Description

ContainerStateTerminated is a terminated state of a container.

Type

object

Required
  • exitCode

Property Type Description

containerID

string

Container’s ID in the format '<type>://<container_id>'

exitCode

integer

Exit status from the last termination of the container

finishedAt

Time

Time at which the container last terminated

message

string

Message regarding the last termination of the container

reason

string

(brief) reason from the last termination of the container

signal

integer

Signal from the last termination of the container

startedAt

Time

Time at which previous execution of the container started

.status.initContainerStatuses[].state.waiting

Description

ContainerStateWaiting is a waiting state of a container.

Type

object

Property Type Description

message

string

Message regarding why the container is not yet running.

reason

string

(brief) reason the container is not yet running.

.status.podIPs

Description

podIPs holds the IP addresses allocated to the pod. If this field is specified, the 0th entry must match the podIP field. Pods may be allocated at most 1 value for each of IPv4 and IPv6. This list is empty if no IPs have been allocated yet.

Type

array

.status.podIPs[]

Description

PodIP represents a single IP address allocated to the pod.

Type

object

Property Type Description

ip

string

IP is the IP address assigned to the pod

.status.resourceClaimStatuses

Description

Status of resource claims.

Type

array

.status.resourceClaimStatuses[]

Description

PodResourceClaimStatus is stored in the PodStatus for each PodResourceClaim which references a ResourceClaimTemplate. It stores the generated name for the corresponding ResourceClaim.

Type

object

Required
  • name

Property Type Description

name

string

Name uniquely identifies this resource claim inside the pod. This must match the name of an entry in pod.spec.resourceClaims, which implies that the string must be a DNS_LABEL.

resourceClaimName

string

ResourceClaimName is the name of the ResourceClaim that was generated for the Pod in the namespace of the Pod. It this is unset, then generating a ResourceClaim was not necessary. The pod.spec.resourceClaims entry can be ignored in this case.

API endpoints

The following API endpoints are available:

  • /api/v1/pods

    • GET: list or watch objects of kind Pod

  • /api/v1/watch/pods

    • GET: watch individual changes to a list of Pod. deprecated: use the 'watch' parameter with a list operation instead.

  • /api/v1/namespaces/{namespace}/pods

    • DELETE: delete collection of Pod

    • GET: list or watch objects of kind Pod

    • POST: create a Pod

  • /api/v1/watch/namespaces/{namespace}/pods

    • GET: watch individual changes to a list of Pod. deprecated: use the 'watch' parameter with a list operation instead.

  • /api/v1/namespaces/{namespace}/pods/{name}

    • DELETE: delete a Pod

    • GET: read the specified Pod

    • PATCH: partially update the specified Pod

    • PUT: replace the specified Pod

  • /api/v1/namespaces/{namespace}/pods/{name}/log

    • GET: read log of the specified Pod

  • /api/v1/watch/namespaces/{namespace}/pods/{name}

    • GET: watch changes to an object of kind Pod. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

  • /api/v1/namespaces/{namespace}/pods/{name}/status

    • GET: read status of the specified Pod

    • PATCH: partially update status of the specified Pod

    • PUT: replace status of the specified Pod

  • /api/v1/namespaces/{namespace}/pods/{name}/ephemeralcontainers

    • GET: read ephemeralcontainers of the specified Pod

    • PATCH: partially update ephemeralcontainers of the specified Pod

    • PUT: replace ephemeralcontainers of the specified Pod

/api/v1/pods

HTTP method

GET

Description

list or watch objects of kind Pod

Table 1. HTTP responses
HTTP code Reponse body

200 - OK

PodList schema

401 - Unauthorized

Empty

/api/v1/watch/pods

HTTP method

GET

Description

watch individual changes to a list of Pod. deprecated: use the 'watch' parameter with a list operation instead.

Table 2. HTTP responses
HTTP code Reponse body

200 - OK

WatchEvent schema

401 - Unauthorized

Empty

/api/v1/namespaces/{namespace}/pods

HTTP method

DELETE

Description

delete collection of Pod

Table 3. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

Table 4. HTTP responses
HTTP code Reponse body

200 - OK

Status schema

401 - Unauthorized

Empty

HTTP method

GET

Description

list or watch objects of kind Pod

Table 5. HTTP responses
HTTP code Reponse body

200 - OK

PodList schema

401 - Unauthorized

Empty

HTTP method

POST

Description

create a Pod

Table 6. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 7. Body parameters
Parameter Type Description

body

Pod schema

Table 8. HTTP responses
HTTP code Reponse body

200 - OK

Pod schema

201 - Created

Pod schema

202 - Accepted

Pod schema

401 - Unauthorized

Empty

/api/v1/watch/namespaces/{namespace}/pods

HTTP method

GET

Description

watch individual changes to a list of Pod. deprecated: use the 'watch' parameter with a list operation instead.

Table 9. HTTP responses
HTTP code Reponse body

200 - OK

WatchEvent schema

401 - Unauthorized

Empty

/api/v1/namespaces/{namespace}/pods/{name}

Table 10. Global path parameters
Parameter Type Description

name

string

name of the Pod

HTTP method

DELETE

Description

delete a Pod

Table 11. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

Table 12. HTTP responses
HTTP code Reponse body

200 - OK

Pod schema

202 - Accepted

Pod schema

401 - Unauthorized

Empty

HTTP method

GET

Description

read the specified Pod

Table 13. HTTP responses
HTTP code Reponse body

200 - OK

Pod schema

401 - Unauthorized

Empty

HTTP method

PATCH

Description

partially update the specified Pod

Table 14. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 15. HTTP responses
HTTP code Reponse body

200 - OK

Pod schema

201 - Created

Pod schema

401 - Unauthorized

Empty

HTTP method

PUT

Description

replace the specified Pod

Table 16. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 17. Body parameters
Parameter Type Description

body

Pod schema

Table 18. HTTP responses
HTTP code Reponse body

200 - OK

Pod schema

201 - Created

Pod schema

401 - Unauthorized

Empty

/api/v1/namespaces/{namespace}/pods/{name}/log

Table 19. Global path parameters
Parameter Type Description

name

string

name of the Pod

HTTP method

GET

Description

read log of the specified Pod

Table 20. HTTP responses
HTTP code Reponse body

200 - OK

string

401 - Unauthorized

Empty

/api/v1/watch/namespaces/{namespace}/pods/{name}

Table 21. Global path parameters
Parameter Type Description

name

string

name of the Pod

HTTP method

GET

Description

watch changes to an object of kind Pod. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

Table 22. HTTP responses
HTTP code Reponse body

200 - OK

WatchEvent schema

401 - Unauthorized

Empty

/api/v1/namespaces/{namespace}/pods/{name}/status

Table 23. Global path parameters
Parameter Type Description

name

string

name of the Pod

HTTP method

GET

Description

read status of the specified Pod

Table 24. HTTP responses
HTTP code Reponse body

200 - OK

Pod schema

401 - Unauthorized

Empty

HTTP method

PATCH

Description

partially update status of the specified Pod

Table 25. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 26. HTTP responses
HTTP code Reponse body

200 - OK

Pod schema

201 - Created

Pod schema

401 - Unauthorized

Empty

HTTP method

PUT

Description

replace status of the specified Pod

Table 27. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 28. Body parameters
Parameter Type Description

body

Pod schema

Table 29. HTTP responses
HTTP code Reponse body

200 - OK

Pod schema

201 - Created

Pod schema

401 - Unauthorized

Empty

/api/v1/namespaces/{namespace}/pods/{name}/ephemeralcontainers

Table 30. Global path parameters
Parameter Type Description

name

string

name of the Pod

HTTP method

GET

Description

read ephemeralcontainers of the specified Pod

Table 31. HTTP responses
HTTP code Reponse body

200 - OK

Pod schema

401 - Unauthorized

Empty

HTTP method

PATCH

Description

partially update ephemeralcontainers of the specified Pod

Table 32. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 33. HTTP responses
HTTP code Reponse body

200 - OK

Pod schema

201 - Created

Pod schema

401 - Unauthorized

Empty

HTTP method

PUT

Description

replace ephemeralcontainers of the specified Pod

Table 34. Query parameters
Parameter Type Description

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Table 35. Body parameters
Parameter Type Description

body

Pod schema

Table 36. HTTP responses
HTTP code Reponse body

200 - OK

Pod schema

201 - Created

Pod schema

401 - Unauthorized

Empty