1. Documentation
×

Configuring a dedicated network for live migration

You can configure a dedicated secondary network for live migration. A dedicated network minimizes the effects of network saturation on tenant workloads during live migration.

Configure a dedicated secondary network for live migration

Configure a dedicated secondary network for live migration to minimize the effects of network saturation on tenant workloads during live migration.

Prerequisites

  • You installed the OpenShift CLI (oc).

  • You logged in to the cluster as a user with the cluster-admin role.

  • Each node has at least two Network Interface Cards (NICs).

  • The NICs for live migration are connected to the same VLAN.

  • You have configured a Linux bridge network.

Procedure

  1. Create a NetworkAttachmentDefinition manifest according to the following example:

    apiVersion: "k8s.cni.cncf.io/v1"
kind: NetworkAttachmentDefinition
metadata:
  name: my-secondary-network
  namespace: kubevirt-hyperconverged
spec:
  config: '{
    "cniVersion": "0.3.1",
    "name": "migration-bridge",
    "type": "macvlan",
    "master": "eth1",
    "mode": "bridge",
    "ipam": {
      "type": "whereabouts",
      "range": "10.200.5.0/24"
    }
  }'

    • metadata.name: Defines the name of the NetworkAttachmentDefinition object.

    • config.master: Defines the name of the NIC to be used for live migration.

    • config.type: Defines the name of the CNI plugin that provides the network for the NetworkAttachmentDefinition.

    • config.range: Defines an IP address range for the secondary network. This range must not overlap the IP addresses of the main network.

  2. Open the HyperConverged CR in your default editor by running the following command:

    $ oc edit hyperconvergeds.v1beta1.hco.kubevirt.io kubevirt-hyperconverged -n kubevirt-hyperconverged

  3. Add the name of the NetworkAttachmentDefinition object to the spec.virtualization.liveMigrationConfig stanza of the HyperConverged CR.

    Example HyperConverged manifest:

    apiVersion: hco.kubevirt.io/v1
kind: HyperConverged
metadata:
  name: kubevirt-hyperconverged
  namespace: kubevirt-hyperconverged
spec:
  virtualization:
    liveMigrationConfig:
      completionTimeoutPerGiB: 800
      network: <network>
      parallelMigrationsPerCluster: 5
      parallelOutboundMigrationsPerNode: 2
      progressTimeout: 150
# ...

    • spec.virtualization.liveMigrationConfig.network: Defines the name of the Multus NetworkAttachmentDefinition object to be used for live migrations.

  4. Save your changes and exit the editor. The virt-handler pods restart and connect to the secondary network.

Verification

  • When the node that the virtual machine runs on is placed into maintenance mode, the VM automatically migrates to another node in the cluster. You can verify that the migration occurred over the secondary network and not the default pod network by checking the target IP address in the virtual machine instance (VMI) metadata.

    $ oc get vmi <vmi_name> -o jsonpath='{.status.migrationState.targetNodeAddress}'

Select a dedicated migration network by using the web console

You can select a dedicated network for live migration by using the OKD web console.

Prerequisites

  • You configured a Multus network for live migration.

  • You created a network attachment definition for the network.

Procedure

  1. Go to Virtualization → Settings in the OKD web console.

  2. On the Cluster tab, click General settiings.

  3. Click Live Migration.

  4. Select the network from the Live migration network list.

Additional resources